Eagle 1818C User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Wire Shelf, model __________. (EAGLEbrite®Zinc,

Chrome, Valu-Master

Grey Epoxy, Valu-Gard®Green Epoxy, EAGLEgard®Green Epoxy with MICROGARD®, or Stainless steel electropolished) finish. Patented QuadTruss®design, with mat wires welded to a four-truss assembly on front and back, and a three-truss assembly on each end.

Eagle Post, model __________. (EAGLEbrite

Zinc, Chrome, Valu-Master®Grey Epoxy, Valu-Gard®Green Epoxy, EAGLEgard Green Epoxy with MICROGARD®, or Stainless steel) finish. Post is 1˝ diameter, numerically grooved in 1˝ increments, and includes post cap and leveling bolt.

Wire Shelving

MODELS:

14* 18* 21*

* See charts for complete model numbers.

• Patented QuadTruss®design (patent #5,390,803) makes

EAGLE shelves up to 25% stronger and provides a retaining ledge for increased storage stability and product retention.

• Assembly: numerically calibrated grooved posts, tapered plastic split sleeves and shelf collars combine to make shelving assembly a simple two-step exercise: 1) Snap the split sleeves

24* 30* 36*

P7-* P14-* P18-*

P33-* P54-* P63-*

onto a post over the number of your choice; and 2) slide a shelf collar over the split sleeves. A positive lock between shelf and post is created without the use of any tools.

• Open-wire construction promotes higher visibility, allows light to pass through the shelves, permits greater air circulation which helps reduce moisture and dust build-up, and increases the effectiveness of fire-suppression systems.

• Tapered split sleeves of high-temperature-resistant ABS plastic create a positive lock that becomes stronger as the load increases.

• Posts are numbered in increments of 1˝ (25mm) to ensure fast and level assembly.

• Leveling feet are provided to help compensate for uneven floor surfaces.

• Shelf strength: shelf mat utilizes a pincer-type design with the mat wire sandwiched between the two top truss wires, adding significant strength and distributing the entire load without stress and strain on the welds.

• Weight capacities: 800 lbs. (363 kg) for shelves up to 48˝ (1219mm)-long, evenly distributed static load. 600 lbs. (272 kg) for shelves 54˝ through 72˝ (1372 through

1˝ O.D. grooved post

shelf collar

wire shelves assembled to posts

support wire

.187˝ diameter

(6 gauge)

mat wires

.135˝ diameter

(10 gauge)

1829mm)-long. Shelving units should not exceed 2400 lbs.

1.625˝

(1089 kg) per set of four posts.

• Packaging: 24˝ (610mm) through 48˝ (1219mm) lengths are

split sleeve

straight line lower truss wire

adjustable foot

EAGLE GROUP

bottom truss wire

.250˝ diameter

(2 gauge)

post with stamped

numbers calibrated

every inch

truss wire

.187˝ diameter

(6 gauge)

patented QuadTruss 4-wire design

packed four to a box. 54˝, 60˝ and 72˝ (1372, 1524 and 1829mm) lengths are packed two to a box.

Options / Accessories

Casters Foot plates “S” hooks

Ledges Dividers Rods and tabs

Aluminum split sleeves Shelf markers

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

Government specifications

MIL-S-40144E

EG01.00 Rev. 05/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

P74-* P86-* P96-*

EG01.00

Wire Shelving

EG01.00

Item No.:

Project No.:

S.I.S. No.:

Wire Shelves

EAGLE Valu- Valu- EAGLE stainless width x length weight

brite

chrome Master®Gard®gard®* steel in. mm lb. kg

1424Z 1424C 1424V 1424VG 1424E 1424S 14˝ x 24˝ 356 x 610 6 2.7 1430Z 1430C 1430V 1430VG 1430E 1430S 14˝ x 30˝ 356 x 762 7 3.2 1436Z 1436C 1436V 1436VG 1436E 1436S 14˝ x 36˝ 356 x 914 8 3.6 1442Z 1442C 1442V 1442VG 1442E 1442S 14˝ x 42˝ 356 x 1067 9 4.1 1448Z 1448C 1448V 1448VG 1448E 1448S 14˝ x 48˝ 356 x 1219 10 4.6 1454Z 1454C 1454V 1454VG 1454E 1454S 14˝ x 54˝ 356 x 1372 12 5.5 1460Z 1460C 1460V 1460VG 1460E 1460S 14˝ x 60˝ 356 x 1524 14 6.4 1472Z 1472C 1472V 1472VG 1472E 1472S 14˝ x 72˝ 356 x 1829 17 7.7

1824Z 1824C 1824V 1824VG 1824E 1824S 18˝ x 24˝ 457 x 610 7 3.2 1830Z 1830C 1830V 1830VG 1830E 1830S 18˝ x 30˝ 457 x 762 8 3.6 1836Z 1836C 1836V 1836VG 1836E 1836S 18˝ x 36˝ 457 x 914 9 4.1

Catalog Specification Sheet No.

1842Z 1842C 1842V 1842VG 1842E 1842S 18˝ x 42˝ 457 x 1067 11 5.0 1848Z 1848C 1848V 1848VG 1848E 1848S 18˝ x 48˝ 457 x 1219 12 5.5 1854Z 1854C 1854V 1854VG 1854E 1854S 18˝ x 54˝ 457 x 1372 15 6.8 1860Z 1860C 1860V 1860VG 1860E 1860S 18˝ x 60˝ 457 x 1524 17 7.7 1872Z 1872C 1872V 1872VG 1872E 1872S 18˝ x 72˝ 457 x 1829 20 9.1

2124Z 2124C 2124V 2124VG 2124E 2124S 21˝ x 24˝ 533 x 610 8 3.6 2130Z 2130C 2130V 2130VG 2130E 2130S 21˝ x 30˝ 533 x 762 9 4.1 2136Z 2136C 2136V 2136VG 2136E 2136S 21˝ x 36˝ 533 x 914 11 5.0 2142Z 2142C 2142V 2142VG 2142E 2142S 21˝ x 42˝ 533 x 1067 12 5.5 2148Z 2148C 2148V 2148VG 2148E 2148S 21˝ x 48˝ 533 x 1219 14 6.4 2154Z 2154C 2154V 2154VG 2154E 2154S 21˝ x 54˝ 533 x 1372 16 7.3 2160Z 2160C 2160V 2160VG 2160E 2160S 21˝ x 60˝ 533 x 1524 18 8.2 2172Z 2172C 2172V 2172VG 2172E 2172S 21˝ x 72˝ 533 x 1829 24 10.9

Wire Shelving

2424Z 2424C 2424V 2424VG 2424E 2424S 24˝ x 24˝ 610 x 610 9 4.1 2430Z 2430C 2430V 2430VG 2430E 2430S 24˝ x 30˝ 610 x 762 11 5.0 2436Z 2436C 2436V 2436VG 2436E 2436S 24˝ x 36˝ 610 x 914 13 5.9 2442Z 2442C 2442V 2442VG 2442E 2442S 24˝ x 42˝ 610 x 1067 15 6.8 2448Z 2448C 2448V 2448VG 2448E 2448S 24˝ x 48˝ 610 x 1219 16 7.3 2454Z 2454C 2454V 2454VG 2454E 2454S 24˝ x 54˝ 610 x 1372 19 8.6 2460Z 2460C 2460V 2460VG 2460E 2460S 24˝ x 60˝ 610 x 1524 21 9.5 2472Z 2472C 2472V 2472VG 2472E 2472S 24˝ x 72˝ 610 x 1829 26 11.8

3036Z 3036C 3036V 3036VG 3036E 3036S 30˝ x 36˝ 762 x 914 17 7.7 3048Z 3048C 3048V 3048VG 3048E 3048S 30˝ x 48˝ 762 x 1219 20 9.1 3060Z 3060C 3060V 3060VG 3060E 3060S 30˝ x 60˝ 762 x 1524 25 11.4 3072Z 3072C 3072V 3072VG 3072E 3072S 30˝ x 72˝ 762 x 1829 30 13.6

3636Z 3636C 3636V 3636VG 3636E 3636S 36˝ x 36˝ 914 x 914 21 9.5 3648Z 3648C 3648V 3648VG 3648E 3648S 36˝ x 48˝ 914 x 1219 26 11.8 3660Z 3660C 3660V 3660VG 3660E 3660S 36˝ x 60˝ 914 x 1524 34 15.4 3672Z 3672C 3672V 3672VG 3672E 3672S 36˝ x 72˝ 914 x 1829 43 19.5

Posts

Numerically grooved in 1˝ (25mm) increments. Includes post cap and leveling bolt. For mobile application (excluding 96˝ posts), add prefix “C” to model number. Example: CP14-E. See Spec Sheet #EG01.05 for information about casters available.

EAGLE Valu- Valu- EAGLE stainless height weight

brite

** chrome Master®Gard®gard®* steel in. mm lb. kg

P7-Z P7-C P7-V P7-VG P7-E P7-S 7˝ 178 1.0 0.5 P14-Z P14-C P14-V P14-VG P14-E P14-S 14˝ 356 1.0 0.5 P18-Z P18-C P18-V P18-VG P18-E P18-S 18˝ 457 1.5 0.7 P33-Z P33-C P33-V P33-VG P33-E P33-S 33˝ 838 2.0 0.9 P54-Z P54-C P54-V P54-VG P54-E P54-S 54˝ 1372 3.0 1.4 P63-Z P63-C P63-V P63-VG P63-E P63-S 63˝ 1600 3.5 1.6 P74-Z P74-C P74-V P74-VG P74-E P74-S 74˝ 1880 4.0 1.8 P86-Z P86-C P86-V P86-VG P86-E P86-S 86˝ 2184 5.0 2.3

- n/a - P96-C*** - n/a - - n/a - - n/a - P96-S*** 96˝ 2438 6.0 2.7

MICROGARD®standard on all EAGLEgard®posts.

** EAGLEbrite®posts are clear epoxy coated for use in dry or wet environments.

*** 96˝ (2538mm) posts are NOT to be used on units less than 24˝ (610mm) front-to-back.

Recommend using in conjunction with foot plates to affix to floor, and with post clamps where applicable. For stationary use only.

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 • www.eaglegrp.com Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Finishes available:

Stainless Steel finish

— OUR BEST

• Stainless steel

NSF-listed for all environments. Type 304 stainless steel.

15-Year Limited Warranty

Note: Stainless steel shelving

Eaglegard

• Zinc chloride

• Clear chromate

• MasterSeal

• Blue green hybrid epoxy

with MICROGARD

NSF-listed for all environments. Zinc chloride plating followed by clear chromate plating with MasterSeal translucent epoxy with MICROGARD®.

15-Year Limited Warranty

Valu-Master®and Valu-Gard

• Phosphate conversion coating

• MasterSeal®sealer

• Pewter gray (Valu-Master®)

or green (Valu-Gard

NSF-listed for wet or dry storage environments. Phosphate conversion coating followed by epoxy coating. 5-Year Limited Warranty

Chrome

• Bright nickel

• Chrome

• Air-dry lacquer

NSF-listed for dry storage environments. Bright nickel plating followed by chrome plating.

1-Year Limited Warranty

(NOTE: Optional clear hybrid epoxy, NSF-listed for all environments, is available.)

Eaglebrite®zinc

• Zinc chloride

• Clear chromate

• MasterSeal

NSF-listed for dry storage environments. Bright zinc chloride plating followed by clear chromate plating with MasterSeal protection.

3-Year Limited Warranty

(NOTE: Wire shelves feature MasterSeal NSF-listed for all environments.)

MICROGARD®is an antimicrobial agent which

hybrid epoxy

sealer

sealer, and a final coat of hybrid

epoxies

sealer

contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew on the surface of the shelves that cause stains, odors and degradation. STANDARD ON ALL EAGLEGARD®SHELVING.

is electropolished.

) epoxy

sealer for improved rust

sealer.

Printed in U.S.A.

Rev. 05/10