Eagle 1436S User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Solid Gowning Benches: 9˝- and 12˝-wide 300 series stainless
solid benches. #4 brush or electropolished finish. Flanged foot
plates. 36˝ to 84˝ length. 90° downturn on each end.
Wire Gowning Benches: 14˝-deep wire bench in 36˝ to 72˝
length. 62% laminar flow. Electropolished stainless or chrome
plated. Triangular foot plates mounted to 1˝-diameter legs.
Gowning Benches with Standard Undershelf: 18˝-wide, 300
series stainless steel, 36˝ to 72˝ in length. #4 brush finish or
electropolished seat. Solid or perforated seat.
perforation pattern. 18˝-tall posts with triangular foot plates.
One 14˝-wide undershelf is standard, with additional
shelves optional.
solid gowning bench
wire gowning bench
gowning bench with standard undershelf and perforated seat,
shown with additional undershelf and dividers
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2015 by the Eagle Group
3
⁄4˝ x 1˝ centered
Gowning Benches
MODELS:
CRB09*
CRB12*
CRB18*
* See charts on back for complete model numbers.
Solid Gowning Benches
• Seats: Front and rear feature a rolled edge, with ends turned
down 90°. 14 gauge type 304 stainless steel. Stainless steel
channels run underside for added stability. 500-lb. (227 kg)
weight capacity.
5
• Legs: 1
type 304 stainless steel. 12˝-wide benches, that are 72˝
(1829mm) and longer, consist of six legs. Legs joined by
stainless steel front-to-back crossbracing. Legs recessed in
gussets that are joined to channels that run underside seat.
• Foot plates: Heavy gauge stainless steel, flanged. Allows for
bench to be bolted to floor if desired.
Wire Gowning Benches
• Seats: 14˝ (356mm) wide.
• Legs: 1˝ (25mm) diameter posts, 18˝ (457mm) high,
16 gauge type 304 stainless steel.
• Foot plates: 13 gauge stainless steel, triangular. Allows for
bench to be bolted to floor if desired.
• Channel frame: 1˝ (25mm)-square channel, 14 gauge
stainless steel.
Gowning Benches with Standard Undershelf
• Seats: Front and rear feature a rolled edge, with ends turned
down 90°. Electropolished and stainless steel finish available
on all seats. 500-lb. (227 kg) weight capacity.
– Perforated seats: 18˝ (457mm) wide.
– Solid seats: 18˝ (457mm) wide. 14 gauge type 304.
• Legs: 1˝ (25mm) diameter posts, 18˝ (457mm) high,
16 gauge type 304 stainless steel. 72˝ (1829mm) benches
consist of six legs.
• Foot plates: 13 gauge stainless steel, triangular. Allows for
bench to be bolted to floor if desired.
• Undershelf: Features patented Quad-Truss®design (patent
#5,390,803). 14˝ x 36˝ (356 x 914mm) wire shelf, type 304
stainless steel. 72˝ (1829mm) benches consist of two 14˝ x
36˝ (356 x 914mm) wire shelves with S-hooks.
⁄8˝ (41mm)-diameter, 17˝ (432mm) high, 16 gauge
perforations on 1˝ (25mm) centers, allowing a
40% laminar flow.
W14*
PCRB18*
SD14-4S
1436S
1448S
1460S
3
⁄4˝ (19mm)
EG04.03 Rev. 11/15
EG04.03
Gowning Benches
Item No.:
Project No.:
EG04.03
S.I.S. No.:
Gowning Benches
Solid Gowning Benches Wire Gowning Benches
TOP VIEW
Catalog Specification Sheet No.
FRONT VIEW SIDE VIEW
electropolished stainless steel width length weight
model # model # in. mm in. mm lbs. kg
CRB0936EP CRB0936 9˝ 229 36˝ 914 26 11.8
CRB0948EP CRB0948 9˝ 229 48˝ 1219 32 14.5
CRB0960EP CRB0960 9˝ 229 60˝ 1524 39 17.6
CRB0972EP CRB0972 9˝ 229 72˝ 1829 46 20.9
Gowning Benches
CRB1236EP CRB1236 12˝ 305 36˝ 914 30 13.6
CRB1248EP CRB1248 12˝ 305 48˝ 1219 40 18.1
CRB1260EP CRB1260 12˝ 305 60˝ 1524 50 22.7
CRB1272EP * CRB1272 * 12˝ 305 72˝ 1829 60 27.2
CRB1284EP * CRB1284 * 12˝ 305 84˝ 2134 70 31.8
* Comes with six legs.
Gowning Benches with Standard Undershelf
electropolished stainless steel electropolished stainless steel width length weight
PCRB1836EP PCRB1836 CRB1836EP CRB1836 18˝ 457 36˝ 914 38 17.2
PCRB1848EP PCRB1848 CRB1848EP CRB1848 18˝ 457 48˝ 1219 43 19.5
PCRB1860EP PCRB1860 CRB1860EP CRB1860 18˝ 457 60˝ 1524 49 22.0
TOP VIEW
FRONT VIEW
PCRB1872EP PCRB1872 CRB1872EP CRB1872 18˝ 457 72˝ 1829 55 24.9
TOP VIEW
FRONT VIEW SIDE VIEW
chrome stainless steel width length weight
model # model # in. mm in. mm lbs. kg
W1436-GBC W1436-GBS 14˝ 356 36˝ 914 15 6.8
W1448-GBC W1448-GBS 14˝ 356 48˝ 1219 19 8.6
W1460-GBC W1460-GBS 14˝ 356 60˝ 1524 25 11.3
W1472-GBC W1472-GBS 14˝ 356 72˝ 1829 30 13.6
with Perforated Seat with Solid Seat
model # model # model # model # in. mm in. mm lbs. kg
Options for Gowning Benches with Standard Undershelf
SIDE VIEW
Stainless Steel Dividers
model # in. mm in. mm lbs. kg
SD14-4S 14˝ 356 4˝ 102 0.8 0.4
Additional Stainless Steel Undershelves*
model # in. mm in. mm lbs. kg
1436S * 14˝ 356 36˝ 914 8 3.6
1448S 14˝ 356 48˝ 1219 10 4.6
1460S 14˝ 356 60˝ 1524 14 6.4
Two #1436S undershelves required for 72˝ (1829mm)-long benches.
*
length height weight
width length weight
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2015 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 11/15
Loading...