Wizard Ts130
QUICK START GUIDE
Wi z ard T s1 3 0
QUIC K START GUI DE
Package included:
1 x Eachine Wizard TS130 frame kit
1 x TS 20A 4in1 Brushless ESC
4 x TS1507 4100KV brushless motor
1 x F4 flight controller
1 x FOXEER Arrow MICRO PRO camera
1 x 5.8G 40CH 25mw 100mw 200mw switchable VTX
2 x T3056C 3-blade propeller transparent white CW
2 x T3056C 3-blade propeller transparent white CCW
2 x T3056C 3-blade propeller blue CW
2 x T3056C 3-blade propeller blue CCW
1 x Antenna
1 x Battery strap
2 x Carbon fiber wrench
10 x Nylon cable tie
-2-
Wi z ard T s1 3 0
Contents
1.0 Frame kit----------------------------------------04
Motor-----
2.0 ----------------------------------------04
3.0 Esc------------------------------------------------05
4.0 Flight controller---------------------------------05
5.0
Switchable VTX---------------------------------06-09
6.0
Camera-----------------------------------------------09
7.0 Motor Unlock/Lock------------------------------10
8.0 Traversing flight---------------------------------10
QUIC K START GUI DE
-3-
1.0 Frame kit
Wheelbase: 130mm
Material: 3K carbon fiber
Top plate thickness: 2mm
Bottom plate thickness: 3mm
Arti st: hydrographics transfer printing
2.0 Motor
Idle Current (Io/10V): 1.68A
Lipo Cell: 3-4S
Weight: 17.6g
Max Continuous Current: 26A
Max Continuous Power: 416W
Max th rust: 626g(4S/3")
Configu-ration: 9N/12P
Motor Resistance (RM): 0.0495 Ω
Stator Diameter: 15mm
Wi z ard T s1 3 0
QUIC K START GUI DE
Stator Thickness: 7mm
Motor Diameter: 21.6mm
Motor Body Length: 15.5mm
Overall Shaft Length: 29mm
Prop adapter shaft: M5
Bolt holes spacing: 12mm
Bolt thread: M2
Propeller: 3”
-4-
3.0 ESC
Continuous current: 20A
Peak current (5S): 25A
Input voltage: 2-4S
Supports Dshot600, Dshot300, Dshot150
Size: 27x27mm
Weigjt: 3.3g
4.0 Flight controller
CPU: f4STM32 F405 SCM
Input voltage: 3-4S
Sensor: MPU6000 SPI
Built in OSD
Built in 5V 2A BEC
Size: 25x25mm
Weight: 2.3g
Wi z ard T s1 3 0
QUIC K START GUI DE
-5-
Wi z ard T s1 3 0
5.0 Switchable VTX
Input voltage: 7-24V
Dimensions: 20x20mm
Size: 27mm×27mm×4.5mm
Adjustable 25mw / 100mw / 200mw
Supports smart audio (remote OSD parameter adjustment)
There are two ways to control the frequency and power
of the launches:
Enter the release: FEATURES->VTX SA can en ter the follo wing
interface.
uses remote control to visualize control, as shown in Figure
<1>
1.1
QUIC K START GUI DE
QUIC K START GUI DE
Fig ure 1.1
The second row is the status bar, respectively.
F:fr eestyle modeF5: is now in frequency band F,
fift h frequency point.
5820: now has a frequency of 5820.
500: now has a transmit power of 500MW
Third lines
BAND: indicates frequency band, and BAND can be
modified by remote control.A (BOSCAM A) B (BOSCAM B)
E (BOS CAM E) F (FATSHARK) F (E)
Fourth lines
CHAN: represents frequency points, and the 1---8 can be
modified by remote control.
Fift h lines
(FREQ): indicate the
corresponding frequency now, changing with the band a nd
Chan above.
Sixth lines
POWE R: indicates the transmission
power and can be adjusted.
-6-
Wi z ard T s1 3 0
5.0 Switchable VTX
Seventh lines
SET: Enter and select YES to confirm you r BADN, CHAN, P OWER
settings and take effect immedia tely., as shown in Figure 1.2
below
Fig ure 1.2
Eighth lines
The CONFIG: function is set in, as shown in Figure 1.3 below.
QUIC K START GUI DE
QUIC K START GUI DE
Fig ure 1.3
OP MODEL: mode adjustment, with free mode and rac e mode,
needs reboot to take effect.
FSEL MO DE: regulat es frequenc y setting mode, CHAN and
user, user mode is temporarily invalid.
PIT FMODE:PITMODE mode, with PIR and POR mode.
-7-
Wi z ard T s1 3 0
QUIC K START GUI DE
QUIC K START GUI DE
5.0 Switchable VTX
In the P OR mode, POR FREQ: can enter into any frequency
between 5300-5900, as shown in Figure 1.4.
Fig ure 1.4
STATX: status in formation
<2>
XMM-VTX is operated by a button with three LED lights (red
light CH1-8; blue light BAND1-5; green light power 1-3 < 25100-200 mW>)and TBS Smart Au dio remote co ntrol opera tion.
Keyboard operation: Long press 3S (three LED indicators are
all on) to open and enter CH switching operation, and the re d
light will flash, flashing once represents the currentCH1 (2-8
times for CH2-CH8 respectively). At this time, a short press of
the key CH plus 1 will flash the corresponding number of times.
CH1-8 cycle. Press the button 3S (three LED lights are all on)
to open and enter the BANDswitching operation, and the blue
light will flash. The flash once rep resents the c urrent BAND 1
(2-5 times for BAND2-BAND5 respectively). At this time, press
the button BAND plus 1, and the blue light will flash correspondingly.
BAND1-5 cycle. Press the button 3S (three LED lights are all on)
again to open the power switching operation, and the gre en light
will flash, one time represents the current power of the first grade
(2-3 times for the green light flashing respectively), at this time,
press the button power to add one gear, and the green light wil l
flash the corresponding number of times. Power stall 1-3 cycle.
Press the button 3S again (3 LED lights are all bright) to release
the above settings again. Note that the previous settings will not
be saved if the power is off before savi ng. For examp le, if CH is
only set, it is also necessary to press 3S three times longer to
save the settings.Long press button 8S (green light) quit PIT mode.
-8-
Wi z ard T s1 3 0
5.0 Switchable VTX
Note: In the remote control, the power of 25 corresponds to
the actual 25 mW, 200 corresponds to the actual 100 mW, and
500/800 corresponds to the actual 200 mW.
6.0 Camera
Solution: 1/3” Sony SUPER HAD II CCD+Nextchip 2040 DSP
Pixel:PAL: 976(H) x 494(V);NTSC : 768(H)×49 4(V)
TV Sys tem: PAL/NTSC (based on country)
Resolution: 600TVL(color) 650TVL(B&W)
Synchronization: internal
Min. Illumination: 0.01Lux
WDR: support
OSD programming board: support
White Dot Repair: support
DNR: 2D DNR
Camera Title: support
Image Adjustment: support
OSD: Edit Name, Power, Flying time
Input Power: 5-40V
Storage Temperature : -40 C ~ 60 C
Working Temper ature: -10 C ~ 50 C
Power Consumption: 70mA
Low voltage alarm: Support
Preset mode: DEF, VIVID, SUNNY, CLOUDY,LED TR,USR1
Size: 18.5*19mm (bracket excluded)
Weight: 5.3g (bracket excluded )
QUIC K START GUI DEQUIC K START GUI DE
-9-
Wi z ard T s1 3 0
QUIC K START GUI DE
7.0 Motor Unlock/lock
Motor Unlock
Put th e throttle rocker at the lowest point, move the rudder rocker
to the r ight and keep it for more than 2 seconds. The blu e state
indicator is always on, that is unlock the motor.
Motor lock
Put th e throttle rocker at the lowest point, move the rudder rocker to
the leftmost side, and the red state indicator is always turned on to
lock the motor. At this time, pushing the throttle rocker motor upward
will not rotate.
8.0 Traversing flight
1).Flying is more suitable for experienced pilots.
2).During the flight, please keep the flight within the video
rece iving range (the actual range depends on the flight
envi ronment and weather conditions).
3).During flight, please avoid crowd, animals and
High v oltage wires and other obstacles
-10-
Loading...