DÖRR Snapshot Mini 5.0MP, Mini Black 5.0MP, UV555 User manual

Snapshot Mini 5.0MP/ Mini Black 5.0MP

Model UV555

User Manual

Flash

Infrared

PIR Sensor

First use

1) Open the camera using the lateral brackets

2) Make sure that the camera is switched “OFF” always, when changing batteries or SD card

3) Insert 8 x AA/1,5 V batteries (mind polarity)

4) Insert unlocked SD card

5) Move ON/OFF switch to “SET up“ position. Display shows settings.

ON/OFF Switch

Lens

External

V- Connection

LCD

Display

USB

SD Memory

Card Slot

Battery

Compartment

GB

 •Camera symbol Single shot mode
 •5MP Resolution 5 Mega Pixels
 •Battery symbol Battery status
 •SD Memory Card Symbol SD Memory Card is inserted
 •[00034/00965] Stored pictures / free capacity

Setup

In order to change settings switch to “setup” and press menu. A list of various menu items appears.

CAM PIR SYS

Camera Mode

1) Press ◀ and ▶ to select between the registers ( CAM, PIR, SYS )

2) Press ▼ and ▲ to select a menu item within the registers

3) Press ◀ and ▶ to change the menu items

4) Save settings with the “ok” button and leave setup with “menu” button

Photo

MENU> Exit OK> Save

Camera settings (CAM)

Camera Mode: choose between photo or video ( ◀ , ▶ , ok)

Resolution: either choose 3M or 5M ( ◀ , ▶ , ok)

Number of shots: choose 1 to 3 shots per motion ( ◀ , ▶ , ok)

Video quality: select high quality (VGA 640x480 pixels) or QVGA 320x240 pixels ( ◀ , ▶ , ok)

Video length: can be set from 5 up to 60 seconds ( ◀ , ▶ , ok)

www.doerrfoto.de

Snapshot Mini 5.0MP/ Mini Black 5.0MP

Model UV555

User Manual

Motion Detector Settings (PIR)

PIR sensitivity: choose the sensitivity (high, normal, low, off) or turn sensor off ( ◀ , ▶ , ok)

PIR Interval: Select time (5 sec to 60 min) when PIR sensor is deactivated after a shot

Time Interval: Set time interval of camera. Shoots photos during time set (5sec to 8h) If set “off” the camera triggers upon motion

Timer: Camera is on standby mode during desired time. Outside this time camera does not take photos and does not react to motion

(same for “timer interval” mode ). After setting time camera only works during time frame.

System Settings (SYS)

Date & Time: Date to be set as dd.mm.yyyy, Time to be set in 24 h

Time Stamp: Choose if time & date are shown on pictures or not

Password: Secure camera with password, to avoid misuse. The password is needed every time the camera is switched “on”.

Default password is “0000”. Note your password carefully, without the password the camera cannot be operated.

Language: Choose either German or English language

GB

Sound / Beep: Choose “beep” sound on keyboard input or “silent” mode

Overwrite function: Camera may overwrite old pictures with new ones when SD card is full or alternatively abandon function

Format: This function deletes all data on the SD card

Default settings: This sets all parameters to “factory defaults” except date & time

When settings are completed, press „MENU“ to return to starting menu.

Playback

Press “ok” in setup mode to watch latest photos. Press ▼ and ▲ to display all pictures. Press “ok” again to return to setup screen. Videos cannot be
displayed but their data with the first “picture”. Single pictures and videos can be deleted by pressing “menu” in playback mode and confirm with
“ok”.

File name: Pictures and videos will be named continuously, starting with IMG0001.jpg (picture) or IMAG0001.avi (video)

Test shot: In setup mode press then “ok” to manually take a test shot

Installation of the Camera

Fix camera to a tree, pole or any suitable object. Best range is 3-10 meters from camera to object. For security reasons you may obtain cable lock
optionally.

Directing the Camera

1) Hang up camera in about 0,75 - 1 m height, slightly tilting ahead

2) Switch camera to “setup” and close housing.

3) Move in front of camera. When red light is flashing you see the area which is covered by the PIR sensor

4) It is recommended to test the position and take several test photos, to see the area covered by the camera

5) Switch the camera off now

Start surveillance

Switch camera to “ON”, after 15-30 seconds camera is ready

www.doerrfoto.de