DYTRAN 3217A DATA SHEET

SPECIFICATIONS, MODEL 3217A

IEPE ACCELEROMETER

MODEL RANGE F.S. MAXIMUM SENSITIVITY ELECTRICAL NATURAL
SHOCK (NOM) NOISE FREQUENCY
(g) (g) (mV/g) (g) (kHz)

3217A 50 5000 100 0.0005 38

SPECIFICATION VALUE UNITS

DISCHARGE TIME CONSTANT, NOM. 0.5 SECOND

FREQUENCY RESPONSE, ±10% 1 TO 10000 Hz

LINEARITY [1] ±1 % F.S.

TRANSVERSE SENSITIVITY, MAXIMUM 5 %

OUTPUT IMPEDANCE, NOM. 120 OHMS

OUTPUT VOLTAGE BIAS, NOM. +12 VDC

SUPPLY CURRENT RANGE [2] 2 to 20 mA

COMPLIANCE (SUPPLY) VOLTAGE RANGE +18 to +20 VDC

OPERATING TEMPERATURE RANGE -60 to +250 °F

SIZE (WIDTH x HEIGHT) 0.50 x 0.50 INCHES

WEIGHT, LESS CABLE 5 GRAMS

CONNECTOR, SIDE EXIT INTEGRAL, 10 FEET

MATERIAL, HOUSING TITANIUM ALLOY

MOUNTING PROVISION ADHESIVE

ENVIRONMENTAL SEAL HERMETIC, URETHANE MOLDED CABLE BOOT

ISOLATION, CASE TO MOUNTING SURFACE, MIN 10 MΩ

[1] Percent of full scale or any lesser designated full scale range, zero-based best fit straight line method.
[2] Power only with Dytran or Dytran approved current source type power unit. Do not supply power without current limiting. You will destroy
the integral electronics. This will void the warranty.

Page 2