DYTRAN 3097 DATA SHEET

Model Number

Y

X

2

y

2

2

2

2

2

Grms/√(Hz)m/s

s/√(Hz)

10000HZ

0.000002

Grms/√(Hz)

0.00002

m/s

rms/√(Hz)

y

2

2

2

°

°

pply

]

3097A3 PS3097A3

PERFORMANCE SPECIFICATIONS

IEPE ACCELEROMETER

This family also includes:

• MINIATURE SIZE

• HERMETICALLY SEALED

• EXCELLENT LINEARIT

Model Sensitivity (mV/g)

3097A1 10 0.3 to 5000 1.5 to 2.5

3097A2 100 0.3 to 5000 1.5 to 2.5

Refer to the performance specifications of the products in this family for detailed description

Supplied Accessories:

PHYSICAL 2) Model 6580 mounting stud (5-40 to 5-40), qty 1

ENGLISH SI

Weight 0.15 oz 4.3 grams Notes:
Connector [1] Type 10-32 10-32 [1] Coaxial, 10-32 connector. Mates with Dytran cable Model 6010AXX or 6011AX
Mounting Provision
Material, Housing/Connector
Sensing Element CERAMIC CERAMIC
Element Style PLANAR SHEAR PLANAR SHEAR

PERFORMANCE

Sensitivity, ±5 % [2]

Range for ± 5 Volts Output
Frequency Response, ±5%

±15%
Resonant Frequenc
Broad Band Resolution
Spectral Noise

Linearity [2]
Maximum Transverse sensitivit
Strain Sensitivity @ 250µε
Phase Response ±5° 5 to 3000 Hz 5 to 3000 Hz

ENVIRONMENTAL

Maximum V ibrati on
Maximum S hock
Temperature Range -60 to 150
Seal

ELECTRICAL

Current Range [3

Su
Compliance Voltage Range

Output Impedence,Typ 100 Ω 100 Ω
Bias Voltage
Discharge Time Constant

Tapped Hole 5-40 UNC-2B 5-40 UNC-2B

1Hz 0.00005
10Hz 0.00001
100Hz 0.00000
1000Hz 0.000002

TITANIUM TITANIUM

500 mV/G 51

10 G peak 98

0.3 to 5000 Hz 0.3 to 5000 Hz

0.15 to 10,000 Hz 0.15 to 10,000 Hz
> 35 kHz > 35 kHz

0.0003

±1

5

0.002 G/με 0.02

200 G peak 1962

5000 G peak 49050

HERMETIC HERMETIC

2 to 20 mA 2 to 20 mA

+18 to +30 Volts +18 to +30 Volts

+11 to +13 VDC +11 to +13 VDC

1.5 to 2.5 Sec 1.5 to 2.5 Sec

G rms 0.003
Grms/√(Hz)
Grms/√(Hz)
Grms/√(Hz)
Grms/√(Hz)

% F.S. ±1 % F.S.

%5%

F

0.000

0.0001

0.00004

0.00002

-51 to 65

m/s
m/s
m/s
m/s

mV/m/s

m/s

m/s

rms/√(Hz)
rms/√(Hz)
rms/√(Hz)
rms/√(Hz)

2

rm

m/s

m/s
m/s

rms

/µε

peak
peak

C

1) Accredited calibration certificate (ISO 17025)

[2] Measured at 100Hz, 1 Grms per ISA RP 37.2.
[3] Measure using zero-based straight line method, % of F.S. or any lesser range.
[5] Do not apply power to this system without current limiting, 20 mA MAX. To do so will destroy the IC charge amplifier.
[6] In the interest of constant product improvement, we reserve the right to change spec ifications without notice.

TYPICAL LOW FREQUENCY RESPONSE

10

2

10

5

5

0

0

-5

-5

SENSIT IVITY DEVIATION (% )

SENSIT IVITY DEVIATION (% )

-10

-10

-15

-15

0.1 1 10 100

TYPICAL LOW FREQUENCY RESPONSE

FREQUENCY (HZ)

Frequency Response ±5%,(Hz)

30

30

20

20

10

10

0

0

-10

-10

SENSIT IVITY DEVIATION (% )

SENSIT IVITY DEVIATION (% )

-20

-20

-30

-30

-60 -18 24 66 108 150

50

40

30

20

10

0

-10

Phase Shift (degrees)

-20

-30

-40

0.3 3 30

TYPICAL PHASE RESPONSE

Frequency (Hz)

Time Constant (Sec)

TYPICAL TEMPERATURE RESPONSE

TYPICAL TEMPERATURE RESPONSE

TEMPERATURE ( °F)

1
0
0

DOC NO

REV C, ECN 7213, 11/06/10

Operating Temp (°F)

-60 to 200

-60 to 180

Units on the line drawing are in inche s, units in brack ets are in millim eters. Refe r to 127-309 7A for more inf ormation.

21592 Marilla Street, Chatsworth, California 91311 Phone: [phone] Fax:[phone] www.dytran.com
For permission to reprint this content, please contact [e-mail]