DYTRAN 3093M4 DATA SHEET
421
3
3093M4
S/N
DYTRAN
USA
MOUNTING
SURFACE
.365
.590 TYP
2
3
1
.95
VIEW LOOKING INTO
CONNECTOR
PINOUT
PIN #1 GND RETURN, COMMON
2
1
3
4
PIN #2 SIG/PWR AXIS 2 (Y)
PIN #3 SIG/PWR AXIS 3 (Z)
PIN #4 SIG/PWR AXIS 1 (X)
CONNECTOR MATES WITH
DYTRAN CABLE 6041AXX
4. MATERIAL, HOUSING AND CONNECTOR SHELL: TITANIUM ALLOY.
3. WEIGHT: 8.0 GMS.
2. SIG/PWR GROUND IS ISOLATED FROM CASE, 10 MEGOHMS, MIN.
1. ENVIRONMENTAL SEAL: HERMETIC.
INSTRUMENTS, INC.
SCALE
DATE
DRAWN
APPROVED
TITLE
2X
10/31/02
N.C.
OUTLINE/INSTALLATION DRAWING,
REV
PART NO.
MAT'LCHECKED
R.A.
NEXT ASSEMBLY USED ON
DATE
-
-
MODEL 3093M4
MODEL 3093M4
ECN
CHATSWORTH, CA.
-
3093M4
DWG NO.
127-3093M4
SHEET
OF
11
SPECIFICATIONS, MODEL 3093M4 TRIAXIAL ACCELEROMETER
SPECIFICATIONS
RANGE, F.S. (each axis, for ±5 volts out) ± 100 G
SENSITIVITY, +15 -10% [1] 50 mV/G
FREQUENCY RESPONSE, +/- 10% 2 to 5000 Hz
ELEMENT NATURAL FREQUENCY, NOM. 30 kHz
DISCHARGE TIME CONSTANT, NOM. 0.5 SEC
EQUIVALENT ELECTRICAL NOISE .007 G, RMS
LINEARITY [2] 1 %F.S.
TRANSVERSE SENSITIVITY, MAX, 5 %
OUTPUT BIAS VOLTAGE, NOM. +10 VDC
OUTPUT IMPEDANCE, TYP. 100 OHMS
TEMPERATURE RANGE -60 to +250
COEFFICIENT OF THERMAL SENSITIVITY .03 %/oF
MAXIMUM VIBRATION +/- 100 G
MAXIMUM SHOCK 500 G
SIZE (HEIGHT x WIDTH x DEPTH) 0.37 x .59 x .59 INCHES
WEIGHT 10.0 GRAMS
CONNECTOR 4-PIN [3]
SUPPLY CURRENT RANGE, (each axis) [4] 2-to 20 mA
COMPLIANCE (SUPPLY) VOLTAGE RANGE (each axis) +18 to +30 VDC
MATERIAL, HOUSING/CONNECTOR TITANIUM
ENVIRONMENTAL SEAL HERMETIC
MOUNTING [5] ADHESIVE MOUNT
GROUND ISOLATION 10, MIN. MEGOHMS
VALUE
UNITS
o
F
[1] Reference sensitivity measured at 100 Hz, 1 G RMS per ISA RP 37.2
[2] Linearity is % of specified full scale (or any lesser full-scale range), zero-based best fit straight-line method.
[3] Connector mates with Dytran cable assy. Model 6041Axx. (xx = length in feet)
[4] Power only with Dytran LIVM power unit or other Dytran-compatible constant current type power unit. If power
is applied without current limiting protection, the internal amplifier will be immediately destroyed.
[5] Case ground isolation is achieved by internal means.
2
Loading...