
MODEL NUMBER
3093M18
PERFORMANCE SPECIFICATION
Accelerometer, Triaxial, IEPE
This family also includes:
• TEDS FUNCTION Model Range (Gpeak) Resolution (Grms)
• HERMETICALLY SEALED
• STUD MOUNTED
Sensitivity (mV/g)
DOC NO.
PS3093M18
REV B, ECN5818, 03/06/09
Oper. Temp(°F)
TC
ENGLISH
PHYSICAL
Weight
Connector [1]
Housing
Sensing Elemen
PERFORMANC
Sensitivity, +15-10% [2]
cceleration Rang
Frequency Range, ±5
Resonance Frequency, Nom
Linearity [3]
Transverse Sensitivity Max
Noise floo
Spectral Nois
ELECTRICA
Supply Current Range [4
Compliance Voltage Rang
Output Impedance, Typ
Output Bias Voltag
Discharge Time Constant
ENVIRONMENTA
Vibration Ma
Operating Temperature
Seal
Magnetic Sensitivity at 100 Gauss 0.00007 g/Gauss 0.0006867 m/s^2/Gauss
Base Strain Sensitivit
TEDS
TEDs Format
Type 4-pin, 1/4-2
Material Ti-6 AL-4
Material Ti-6 AL-4
Isolation Case Isolated Case Isolated
Material Ceramic Ceramic Notes:
Mode Shear Shear [1] Glass to Metal Seal connector. Mates with Dytran cable Model 6811AXX or 6824AXX (XX=length in feet)
1Hz 500
10Hz 80
100H
1000Hz 30
10000H
0.35 oz 10.0 grams
10 mV/g 1.02 mV/m/s^2
500 Gpeak 4905.00 m/s^2 peak [4] Do Not Apply Power To This Device Without Current Limiting, 20mA Max, To Do So Will
0.7-5000 Hz 0.7-5000 Hz Destroy The Integral IC Amplifie
30 kHz 30 kHz
1 %F.S. 1 %F.S.
6% 6 %
0.006 Grms 0.059 m/s^2 rms
50
15
2 to 20 mA 2 to 20 mA
+18 to +30 VDC +18 to +30 VDC
100 Ω 100 Ω
11 - 13 VDC 11 - 13 VDC
0.4 to 0.7 sec 0.4 to 0.7 sec
5000 g pk 49050 m/s^2
3000 g pk 29430 m/s^2
-60 to +250 °F -51 to +121
Hermetic Hermetic
0.05 g/µε 0.4905 m/s^2/µε
1451.4 V1.0 1451.4 V1.0
µGrms/sqr(Hz)
µGrms/sqr(Hz)
µGrms/sqr(Hz)
µGrms/sqr(Hz)
µGrms/sqr(Hz)
4-pin, 1/4-2
Ti-6 AL-4
Ti-6 AL-4
4905 µm/s^2 rms/sqr(Hz)
784.8 µm/s^2 rms/sqr(Hz)
490.5 µm/s^2 rms/sqr(Hz)
294.3 µm/s^2 rms/sqr(Hz)
147.15 µm/s^2 rms/sqr(Hz)
SI
°C
21592 Marilla Street, Chatsworth, California 91311 Phone: 818.700.7818 Fax:818.700.7880
www.dytran.com For permission to reprint this content, please contact info@dytran.com
Please, refer to the performance specifications of the products in this family for detailed description
Supplied Accessories:
1) Model 6200 Mounting Stu
2) Accredited Calibration Certificate (ISO 17025
[2] Measured At 100 Hz, 1 Grms per ISA RP 37.
[3] Linearity is % of specified full scale (or any less full-scale range), zero-base
best fit straight line method.
TYPICAL SENSITIVITY RESPONSE OVER
5
3
1
-1
-3
Sensitivity Deviation (%)
-5
-100 -50 0 50 100 150 200 250
10
0
-10
-20
-30
-40
Sensitivity Deviation (%)
-50
Units on the line drawing are in inches, units in brackets are in millimeters. Refer to 127-3093M18 for more information.
TEMPERATURE
-100 -4
Temperature (°F)
TYPICAL LOW FREQUENCY RESPONSE
0.1 1 10 100
Frequency (Hz)