DYTRAN 3035M18 DATA SHEET
SPECIFICATIONS
MODEL 3035M18 LIVM ACCELEROMETERs
SPECIFICATION VALUE UNITS
PHYSICAL
WEIGHT 2.5 grams
SIZE, HEX x HEIGHT .281 x .33 inches
MOUNTING PROVISION, 3035M18 M3 X 0.5 integral stud
CONNECTOR, RADIALLY MOUNTED 5-44 coaxial
MATERIAL, HOUSING AND CONNECTOR 300 series stainless steel
PERFORMANCE
SENSITIVITY, ± 10% [1] 10 mV/g
RANGE F.S. FOR ± 5 VOLTS OUTPUT ± 500 g
FREQUENCY RANGE, ± 5% 0.5 to 10k Hz
RESONANT FREQUENCY, NOM. 45 kHz
EQUIVALENT ELECTRICAL NOISE FLOOR .007 g rms
LINEARITY [2] ± 1% % F.S.
TRANSVERSE SENSITIVITY, MAX. 5 %
STRAIN SENSITIVITY .002 g/µε @ 250µε
ENVIRONMENTAL
MAXIMUM VIBRATION/SHOCK 600/3000 ± g pk
TEMPERATURE RANGE -60 to +250 °F
SEAL, HERMETIC Glass-to-metal and welds
COEFFIEICNT OF THERMAL SENSITIVITY .04 %/°F
ELECTRICAL
SUPPLY CURRENT [3] 2 to 20 mA
SUPPLY COMPLIANCE VOLTAGE RANGE +18 to +30 volts
OUTPUT IMPEDANCE, TYP. 100 ohms
BIAS VOLTAGE, +12.25 VOLTS NOM. +11.5 to +13.0 Vdc
DISCHARGE TIME CONSTANT, NOM. 0.5 seconds
OUTPUT SIGNAL POLARITY
FOR ACCELERATION TOWARD TOP positive
CASE GROUNDING case is grounded to
electrical power ground
[1] Measured at 100 Hz, 1g rms per ISA RP 37.2.
[2] Measured using zero-based best straight-line method, % of full scale (F.S.) or any lesser range.
[3] Do not apply power to this device without current limiting, 20 mA MAX. To do so will destroy the integral IC
amplifier.
2
Loading...