Dyson HU02 Specifications
V
LOW VOLTAGE AND HIGH VOLTAGE
TECHNICAL SPECIFICATION
Electrical
Input voltage: Low voltage = 110-127 V, High voltage = 200-240 V
Frequency: 50 or 60 Hz, subject to voltage (85-115 V at 50 Hz);
(85-130 V at 60 Hz); (200-240 V at 50 & 60 Hz)
Standby power consumption: Less then 0.5 W
Motor specification: 1,000 W digital brushless motor
Motor switching rate: 5,000 per second
Amp: Recommended dedicated 15 amp circuit. (110V ~10A; 120V ~8.33A;
220V ~4.55A; 240V ~4.17A)
Heater type: None
Construction
Fascia: Polycarbonate
Antibacterial coating type:
HU02 (Sprayed Nickel) contains antibacterial additive in paint.
HU02 ( White) contains antibacterial moulded additive.
Can help prevent the growth of bacteria.
Back plate mounting bracket: ABS/PBT Plastic
Exterior screw type: Anti-tamper 4 mm Pin-Hex
Water ingress protection to IP24
Filter
HEPA filter (Glass fiber and fleece prelayer)
Removes 99.97% of bacteria as small as 0.3 microns
Operation
Touch free capacitive sensor activation
Hand dry time measurement: 12 seconds
(Measurement based on NSF Protocol P.335)
Sound power level: 79 dB(A)
Sound pressure level @ 2 m: 63 dB(A)¹
Operation lock-out period: 30 seconds
Airspeed at aperture: 675 km/h / 420 mph
Maximum altitude: 2,000 metres / 6,561 ft.
Operating airflow: up to 5.28 gal/sec & up to 42.38 CFM
Operating temperature range: 0°C-40 °C / 32°F-104°F
Logistics
Single unit order code:
Sprayed Nickel - Low voltage: 307174-01, High voltage: 307172-01
White - Low voltage: 307173-01, High voltage: 307171-01
Unit barcodes:
Sprayed Nickel - Low voltage: 8856090 09933, High voltage: 885609009797
White - Low voltage: 8856090 09896, High voltage: 885609009179
Net weight: 2.9 kg / 6.17 lbs
Packaged weight: 4.0 kg / 8.81 lbs
Packaged dimensions:
(H) 146 mm × (W) 454 mm × (D) 273 mm / (H) 5
Standard warranty
5 year par ts and 5 year limited labor warranty
3
/4” × (W) 17 7/8” × (D) 10 3/4”
Product range (Select one)
HU02 Sprayed Nickel
Part number/SKU
Low Volt age: 307174-01
High Voltage: 3 07172-01
HU02 White
Part number/SKU
Low Volt age: 307173-01
High Voltage: 3 07171-01
Accreditations:
Carbon Trust
NSF International
Quiet Mark
Contributes to LEED certification
ADA compliant
UL Listed
¹Sound p ressure measu red at 2 m dis tance, in a semi- anechoic chamb er.
The Car bon label is a tra demark of the C arbon Trust. The N SF logo is the re gistered tr ademark of
NSF Int ernational. Q uiet Mark is a re gistered tr ademark of the N oise Abate ment Societ y.
For further information, please contact Dyson: 1-855-720-6169,
www.dyson.com/airblade
V
(assuming 50
of the backplate to the floor)
(from the rear electrical entry point to the floor)
TECHNICAL SPECIFICATION
Fixing
locations
(4)
Side
electrical
entry point
"
91⁄
4
21⁄
5
"
⁄
8
"
9
"
8
1
"
7
⁄
2
"
4
⁄
3
Rear
electrical
entry point
"
4
⁄
1
"
11
4
⁄
3
Side
electrical
entry point
7
/
”
8
14
SIDE ELEVATIONREAR ELEVATION
"
4
"
2
⁄
1
15
Fixing
locations
1
(4)
/
"
4
"*
4
from the top
⁄
"
1
35
Mounting backplate shown
above in Rear Elevation.
FLOOR
Machine dimensions
Height 151⁄2” Width 9 7⁄32” Depth 4”
Minimum clearance
8 11⁄16” clearance either side and 13⁄16” above machine.
*Please look into local guidelines for A DA compliance.
©20 16 DYS ON
65⁄
(from the top of the backplate to the floor)
"*
41
"*
50
Machine fascia shown above in Side Elevation.
All dimensions shown in inches (+/– 3⁄16 inch).
Holes indicated in green are
measured to the center of the hole.
"
4
⁄
3
2
"
8
For further information, please contact Dyson: 1-855-720-6169,
www.dyson.com/airblade
Loading...