Dynex DX-PS08DC09 User Manual

DX-PS08DC09

FINAL

FOR PRINT

8-sheet Diamond Shredder

Setting up the shredder

1 Mount the shredder head securely to the rim of the wastebasket.

This paper shredder includes a built-in safety mechanism that requires the shredder to be correctly mounted on the supplied wastebasket.

2 Connect the power cord to a standard 120V AC power outlet. The

shredder is now ready to be used.

Using your shredder

1 Slide the power button from OFF to AUTO. 2 Insert the paper, optical disc (CD/DVD), or credit card into the feed slot. Caution: Do not insert more than 8 pages, 1 disc, or 1 credit card at a time.

Emergency stop switch

Push to stop the shredder.

READY

AUTO

REV

OFF

Lights up when the shredder is turned on and ready to shred.

Allows the shredder to start automatically when an item is inserted into the feed slot. When the paper/credit card/CD/DVD has passed through the slot, the shredder will stop.

Caution: Always feed paper in as straight as possible. Caution: Insert no more than eight sheets of paper or one credit card or

optical disc at a time.

Helps clear the cutters of paper that has not passed through. Caution: Never try to clear a jam by using REV when the wastebasket is full, or the jam could be made worse.

Turns o the shredder. For safety reasons, leave the shredder in the OFF position whenever the shredder is unattended or not in use.

Speci cations

Sheet capacity 8 sheets of 20 lb. bond paper

Credit card capacity 1 at a time

Optical disc capacity 1 at a time

Paper shred size 0.28" × 1.93" (0.72 cm × 4.9 cm) pieces

Voltage 120V - 60 Hz 1.8A

Troubleshooting

• If a jam occurs and the cutter stops, slide the power button to REV and pull out the jammed paper.

• If paper is jammed in the shredder blades, please slide the power button to OFF, unplug the power cord, and remove all paper from the entrance and exit of the feed slot.

• If the shredder is run continuously for long periods of time and the motor overheats, a thermal safety switch automatically turns o the shredder. If this occurs, slide the power button to OFF and do not use the shredder for 30 minutes.

Maintenance

Once a month, drizzle vegetable oil or cooking oil (nothing petroleum based) on a few pieces of paper and feed them through the shredder.

QUICK SETUP GUIDE

DX-PS08DC09_10-1346_QSG_V2_EN.indd 1DX-PS08DC09_10-1346_QSG_V2_EN.indd 1 1/6/2011 1:08:31 PM1/6/2011 1:08:31 PM

Cautions

• Repairs must be made by a quali ed technician. Do not attempt to repair the shredder yourself.

• Do not alter the shredder or power cord in any way.

• Do not operate the shredder if it or the power cord appears damaged in any way.

• Always unplug the shredder when moving it or not using it for a long period of time.

• Do not shred wet paper, carbon paper, or vinyl or plastic bags. Shredding these items may reduce the shredder’s performance or cause shock or injury.

• If the paper is too thin (such as an invoice), it might not be able to activate the switch. Please shred thin paper with other paper in order to activate.

• This machine has no “Basket Full” sensor. Please empty the wastebasket regularly to ensure that the paper slot does not become blocked.

• Do not use garbage bags with this shredder. Garbage bags could prevent the shredder head from being correctly mounted, which will prevent the shredder from functioning properly.

WARNING

Shredder is not intended for use by children.

Avoid inserting  ngers into the paper slot.

Do not spray or keep any aerosol products in or around the shredder.

Avoid getting hair near the paper slot.

Avoid getting loose clothing or jewelry near the paper slot.

Do not put paper clips in the shredder.

One-year limited warranty

For complete warranty, visit www.dynexproducts.com.

Contact Dynex:

For customer service call 1-800-305-2204 www.dynexproducts.com

Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Rich eld, MN 55423-3645 USA © 2011 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.

ENGLISH 10-1346

DX-PS08DC09_10-1346_QSG_V2_EN.indd 2DX-PS08DC09_10-1346_QSG_V2_EN.indd 2 1/6/2011 1:08:38 PM1/6/2011 1:08:38 PM