Dynex 09-0406, DX-VIDBKT, DX-VIDLT User Manual

90-day limited warranty

For complete warranty, visit www.dynexproducts.com

© 2009 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specications and features are subject to change without notice or obligation.

ENGLISH 09-0406

DX-VIDLT LED Camcorder Light

To install the batteries:

1 Make sure

that the power switch is in the OFF position.

2 Press in on

the battery door tab, then remove the battery door.

QUICK SETUP GUIDE

Switch

Tab

3 Insert two AAA batteries (not

included) into the battery compartment. Make sure that the + and - symbols on the batteries match

the + and - symbols in the

battery compartment.

4 Snap the battery door back into

place.

To install the light:

• Mount the light on your camcorder by sliding it into place on the accessory shoe and tightening the mounting screw.

If your camcorder does not

have an accessory shoe, the Dynex Video Bracket (model DX-VIDBKT) can provide a mounting platform.

To use the light:

• Turn the light on by sliding the power switch to the MED or HI position. You can then take pictures or video. To conserve batteries, turn the light oﬀ when you are ﬁnished.

Speciﬁcations: LEDs: 10 ~ 3700K (+/- 500K) color

balanced

Power: 2 AAA Alkaline/ NiMH batteries Run Time: 60-90 minutes depending

on battery usage and type

Dimmer: Oﬀ / Medium / High Weig ht: 1.9 oz (with batteries) Size: 2.35” x 1.75” x 1”