Dynaudio XEO 30, XEO 20, XEO 10 User Manual
Xeo 10/20/30
Owner’s
manual
Hello
Welcome to Dynaudio Xeo.
We’ve taken care of the tech;
you take care of the music.
This is
Xeo
9 Introduction
9 Important safety instructions
10 Warning
10 Xeo 10/20/30 speakers
10 Remote control battery
11 Unpacking
11 Removing the protection cap
11 Packaging material
11 Disposal
12 Scope of delivery
13 Connections and control elements
13 Elements on the rear panel
14 Buttons on top of the cabinet (Xeo 10)
14 Remote control
15 Connecting and setting up
15 Positioning and connecting to mains voltage
15 Cloth cover
15 General settings
16 Connecting sources directly
16 Connecting a Bluetooth device
16 Connecting sources via Hub or Connect
17 Operation
17 Switching on
17 Playback of connected sources
17 Playback of a Bluetooth device
18 Fixing the volume
18 Standby
19 Status LEDs on the front
21 Malfunctions
22 Accessories
22 Desk stand
22 Wall bracket
22 VESA100 bracket (Xeo 10/20)
23 Setting up
25 Connection options
26 Division into audio zones
27 Components of the Xeo system
27 The Xeo system
28 Combination examples
30 Declaration of Conformity (EU only)
30 Reminding (USA and Canada only)
31 IC NOTICE
31 MPE Reminding
33 Technical data
Dynaudio Xeo 10/20/30 Introduction
Thank you
for choosing Dynaudio Xeo. Xeo combines the latest wireless
technology with impressive sound quality and makes
listening to music truly convenient and easy. The next few
pages contain important information on connecting the
system and its operation to ensure perfect function and the
best-possible sound quality. We hope you have a great time
listening to your favourite music, Dynaudio
About this product
The active Xeo 10/20/30 speakers are equipped with powerful integrated ampliers and
allow for the direct connection of various analog and digital audio sources. A Bluetooth
interface enables the operation of Bluetooth devices and plays them back in optimal
sound quality. Optional components like Xeo Hub or Dynaudio Connect enable setting
up a wireless multiroom system without any restrictions to the highest sound quality.
The speakers can be fully controlled with a remote control. The operational state of the
system is indicated by two LEDs on the front.
About this manual
This manual describes the operation of the Xeo 10/20/30 speakers. Information about
the optional Xeo modules (Hub, Connect, Extender, Link) can be found in the Owner´s
manual provided with these modules.
76
Important safety instructionsDynaudio Xeo 10/20/30
Xeo
The quintessential
wireless hi-
system
Important
safety
instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
USA and Canada only: A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14. WARNING: To reduce the risk of re or electric shock, this apparatus should
not be exposed to rain or moisture and objects lled with liquids, such as
vases, should not be placed on this apparatus.
15. To completely disconnect this equipment from the mains, disconnect the
power supply cord plug from the receptacle.
16. The mains plug of the power supply cord shall remain readily operable.
8 9
Dynaudio Xeo 10/20/30
Warning / Unpacking
Xeo 10/20/30 speakers
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
If the speakers are connected to the mains voltage, a dangerous electrical
voltage is present inside the speakers.
► Use the supplied power cable to connect the speakers to the mains voltage. Make
sure that the power supply cable is not damaged; replace it with a new one if it has
been damaged.
► To reduce the risk of electric shock, do not remove the back panel and never open
the speaker housing. Do not expose the speakers to rain or moisture.
No user serviceable parts inside. Refer servicing to qualied personnel.
► Do not operate defective speakers and disconnect defective speakers from the
mains voltage. Please contact your Dynaudio Xeo distributor if you have any
problems. Distributor addresses can be found on the Internet at dynaudio.com.
Remote control battery
DANGER OF EXPLOSION
Danger of explosion if battery is incorrectly replaced.
► Replace only with the same or equivalent type.
CHEMICAL BURN HAZARD
If the coin/button cell battery is swallowed, it can cause severe internal burns
in just 2 hours and can lead to death.
► If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
UnpackingWarning
After unpacking, make sure the system is complete and check the device and
all accessories for transport damage. Transport damage may be expected if the
packaging is already severely harmed. Do not attempt to start up a damaged
device. If the contents are incomplete or damaged, please contact your Dynaudio
Xeo distributor. Distributor addresses can be found on the Internet at
dynaudio.com.
Removing the protection cap
The tweeter is protected by a cap to prevent damage during transport and unpacking.
► After you have unpacked the speaker, remove the cap by just pulling it straight out.
Packaging material
The packaging has been designed so that it may be reused as long as it has not been
damaged during transport. Keep the packaging and use the original packaging for all
further transport.
Disposal
Disposal of used electrical and electronic equipment (applicable in European
countries with separate collection systems for this equipment)
This symbol on the product or its packaging indicates that the product must not
be treated as household waste. Instead, it must be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health. The recycling of materials helps to conserve
natural resources. For more detailed information on recycling this product, please
contact your local authority, community waste disposal ofce, or the shop where you
purchased the product.
1110
Loading...