Dynaudio Wall Mount Bracket Brochure
Instruction Manual
er Model
Wandhalterung Für Dynaudio Kompakt-Lautsprecher
Bedienungsanleitung
Wall Mount Bracket For Dynaudio Compact Loudspeak
Introduction
We thank you for choosing this quality wall-mount bracket
which has been designed to work particularly well with the
Dynaudio compact loudspeaker models Audience 42 an 52.
The bracket has been designed to provide a very rigid and
stable support, thus allowing the speaker(s) to perform at
optimum levels in a wide variety of positions. The unique curved shape adds strength to the mounting assembly while also
offering the flexibility of both vertical and horizontal adjustment capabilities. Therefore the loudspeaker(s) may be precisely angled to obtain the optimum listening axis in any
room. The speakers will be mounted in place at a distance
within 6 cm of the wall boundary, and the mounting bracket
will essentially be hidden behind the speaker cabinet.
Mounting surfaces
WARNING
Carefully evaluate the composition, construction and
strength of the surface you are mounting to.
Take care to avoid concealed water (plumbing) and
power (electric) supplies which may be located behind
the desired mounting location(s).
2 11
Instruction Manual
Tools required
Spirit level
Power Drill
3 mm masonry drill bit
No2 Pozidriv screwdriver
Assembly/Installation
Before assembly you should check that the hardware kit is
complete. A complete kit consists of the following:
4 curved steel plates
8 wood screws
2 washers
1 wrench
2 bolts
2 nuts
First put the bold and the plain washer through the slot of the
smaller curved plate. Then, screw the nut flush onto the bolt,
as shown in the picture at the right.
310
Loading...