Dynaudio IP-24 Brochure
IP24
IN-WALL LOUDSPEAKER
Sound Quality
The Dynaudio IP 24 in-wall is the world’s first true audiophile
reference architectural loudspeaker,bringing Dynaudio’s legendary quality
and performance to the custom audio arena.Utilizing Dynaudio’s vast
engineering resources into incorporating innovative new driver
technologies with specific parameters designed to achieve optimum
results in the in-wall mounting application,the IP 24 sets new standards
in terms of technology and qualitative performance.Unlike conventional
in-wall products,the IP 24’s custom-designed drivers are immune to the
detrimental effects on performance associated with the in-wall mounting
application.In contrast,the IP 24 delivers clean and accurate highs,
a naturally balanced midrange,and incredible deep bass performance
and dynamics - a sonic performance both on par with that of Dynaudio’s
conventional loudspeakers and worthy of the company’s badge.
Installation Quality
In typical Danish tradition,Dynaudio’s IP 24 shines in terms of ease of installation.It can be securely installed both simply
and quickly,without any need for mounting rings or accessory brackets.The white aluminium mesh grille and
aluminium frame may be painted,allowing flexibility for perfect integration into any room color scheme or décor.
The inherent Dynaudio build quality will ensure a lifetime of performance and value in any home.
While listeners will revel in the un-compromised musicality of its audiophile purity, the IP 24’s ease of installation and
flexibility of home decor integration will delight installers,architects and interior decorators just the same.
Construction Quality
The IP 24 utilizes advanced-technology drivers designed specifically for the
in-wall application.There is an adjustable tweeter output level to facilitate
both optimized system matching,as well as tuning to personal taste or
preference. The IP 24 drivers are mounted into a baffle crafted from thick
MDF (medium density fiberboard) – a material selected for its ability to
reduce resonance and thus eliminate any coloration.The mounting frame is
constructed of die cast aluminium,chosen to eliminate the adverse effects
of distortion created by vibration related resonance,while it provides added
strength and rigidity to the assembly at a relatively low weight.
Dynaudio is currently the only loudspeaker company engineering an
in-wall solution at this level of technical expertise,and with its customized,
high-performance Dynaudio drivers,the IP 24 establishes a new level of
quality and performance previously unimaginable in this product category.
Dynaudio North America, 1144 Tower Lane,Bensenville IL 60106 USA,
Phone.:630-238-4200,Fax:630-238-0112,www.dynaudioUSA.com
IP24
Design: Infinite Baffle In-Wall
Drivers: One 1.1”(28 mm) Soft Dome Tweeter w/ damped rear chamber,dual centered
Crossover: Two-Way,audiophile-grade crossover with polypropylene capacitors,gold plated
TECHNICAL SPECIFICATIONS
magnet system with vented pole piece,Magnaflux damping and cooling fluid,
aluminium wire voice coil,and aluminium front plate.
One 8.75”(222 mm) Woofer w/ geometrically optimized,MSP (magnesium
silicate polymer) one-piece flat-membrane cone diaphragm,centered
dual-stacked vented magnet system,3 inch aluminium Hexacoil voice coil,
and magnetic shielding.
terminals,and an adjustable tweeter level control.
Frequency Response: 40-23 kHz +/- 3 dB
Sensitivity: 90 dB
Impedance: 4 Ohm (linear)
Power Handling: 150 W
Dimensions
Alum. Mounting Frame: Height: 15.15” (385 mm)
Width: 11.25” (286 mm)
Cut Out: Height: 13.82” (351 mm)
Width: 9.92” (252 mm)
Grille: Height: 13.50” (343 mm)
Width: 9.60" (244 mm)
Min.Depth Required: 3.62” (92 mm)
Baffle: 14 mm-thick MDF (medium density fiberboard) baffle construction eliminates
resonance and coloration.
Frame: Cast Aluminium for maximum rigidity and stability with efficient coupling to
baffle.Corrosion-free,semi-white (RAL 9003,paintable).
Grille: Aluminium Mesh with anti-resonant attachment to baffle/frame assembly.
Corrosion-free,semi-white (RAL 9003,paintable).
Dynaudio North America,1144 Tower Lane,Bensenville IL 60106 USA,
Phone.:630-238-4200,Fax:630-238-0112,www.dynaudioUSA.com
Loading...