Owners Manual
ESOTEC
High-End Mobile Loudspeaker Systems
Home Systems | Professional | Automotive
Introduction
Introduction
Dear Music Lover,
Thank you for your decision to acquire Dynaudio Automotive Loudspeakers for after-market installation. The
Dynaudio Esotec Systems range has been developed to the same high standard as the company's renowned
home audio and professional studio loudspeaker products. The Dynaudio Automotive Esotec range is
specifically engineered for optimum performance in a vehicle to ensure the most precise in-car music
reproduction achievable. Dynaudio's advanced technology is the result of many years of intense research and
development mated to the highest quality standards in production and the company's enduring passion for
musical truth.
Dynaudio is one of very few audio companies producing loudspeaker drivers in-house
through its own dedicated development and production departments. All Dynaudio
loudspeakers are engineered and manufactured in Denmark from the finest grade
materials to the company's extremely high quality standards, and each must pass no
less than 86 individual testing stations, representing the most stringent such measures
in the industry. The state-of-the-art Dynaudio manufacturing facility is so advanced and
features such strict quality control measures that Dynaudio is likely the only specialty
audio company to have exceeded the ISO 9000 quality standard and earn QS 9000
certification.
We wish you many years of enjoying and experiencing music at the highest level of
performance,
Dynaudio
2 Dynaudio Mobile Systems
About this installation manual
This installation manual provides all technical specifications, installation dimensions and crossover connection
instructions for the Dynaudio Esotec series. To realize the full potential of Dynaudio Esotec systems, some areas
should be addressed, as touched upon in the following pages.
Due to the great variety of installation conditions it will not give specific instructions how to install the systems
into your car. Please refer to the operating manual of your car or ask your local automotive dealer for further help.
To observe all relevant matters and thus maximizing the tremendous performance potential of your Dynaudio
Esotec loudspeaker system in your car, ask your authorized Dynaudio automotive loudspeaker dealer for
assistance. He has the knowledge and expertise to perform a high quality aftermarket installation.
Safety information
As all Dynaudio Esotec Series components are passive (meaning these rely on external amplification), the
components themselves can not cause any damage.
However, the components can be damaged beyond repair unless a few ground rules are observed:
X Insure all components are properly installed
X Observe the technical specifications
X Always use high-quality cabling and amplification
About this installation manual
CAUTION
Listening to high sound pressure levels over a longer period of time may harm your hearing.
XTo avoid auditory effects do not listen to high sound levels over a longer period of time.
HIGH SOUND PRESSURE LEVELS
Esotec Series 3
Warranty
Warranty
Dynaudio provides a limited manufacturer’s warranty on Dynaudio
Esotec products. Please check with your local distributor for
warranty conditions.
This warranty only covers faults or defects in material and production. Damage caused as a result of abuse,
misuse or defective electronics is not covered by the warranty. The warranty will only be valid if the metallic
Dynaudio holographic safety label is on the driver.
The warranty is valid only if the product is purchased from an authorized Dynaudio Esotec dealer. All warranty
claims must be accompanied by a copy of the original purchase invoice and warranties are only valid in the
country or market of original origin or distribution. Should warranty service be required, it must be arranged for
in the country of purchase by an authorized Dynaudio Esotec dealer.
4 Dynaudio Mobile Systems
Technical specifications
Tweeter/Midrange
Nominal impedance 8 Ω 8 Ω
Recommended frequency
range
Power handling
• Nominal long term IEC
• Transient
Net weight 0.126 kg 0.75 kg
Overall dimensions (Ø x D) 62.2 x 43 mm 121 x 66 mm
Woofer
Nominal impedance 4 Ω 4 Ω 4 Ω 4 Ω 4 Ω
Recommended frequency
range
Power handling
• Nominal long term IEC
• Transient
Net weight 1.1 kg 1.2 kg 1.1 kg 1.3 kg 1.85 kg
Overall dimensions (Ø x D) 146 x 70 mm 175 x 77 mm 166 x 71 mm 200 x 88 mm 239 x 86 mm
Technical specifications
MD 102 MD 142
2200 – 30000 Hz 700 – 6000 Hz
100 W
500 W
MW 152 MW 162 MW 162 GT MW 172 MW 182
55 – 3500 Hz 40 – 4000 Hz 40 – 4000 Hz 35 – 3500 Hz 30 – 2000 Hz
100 W
1000 W
120 W
1000 W
100 W
1000 W
120 W
1000 W
150 W
1000 W
180 W
1000 W
Esotec Series 5
Technical specifications
Crossover
Crossover frequencies 2200 Hz 900 Hz / 3500 Hz
Nominal impedance 4 Ω 4 Ω
Power handling
• MW 152
• MW 162/162 GT
• MW 172
• MW 182
Dimensions 38 x 84 x 145 mm 43 x 104 x 175 mm
Net weight 0.33 kg 0.60 kg
X 252 X362
100 W
120 W
150 W
–
200 W
200 W
200 W
–
6 Dynaudio Mobile Systems
Technical specifications
Installation dimensions and impedance correction circuit
Tweeter/Midrange
MD 102
MD 142
Installation dimensions (in mm) Impedance correction
1
5
4
3
2
1
2
6
5
4
3
1 Max. Ø 62.2
2 Mounting hole Ø 52.1 - 55.5
3 29.1
4 3
5 13.86
1 Max. Ø 121
2 3 holes Ø 4 on Ø 110.9
3 Mounting hole Ø 96 (add cut-outs
for terminals)
4 Max. 37.5
5 7.5
6 Max. 30
circuit
1.2 μF
8.2 Ω
5.6 μF
6.8 Ω
Esotec Series 7
Technical specifications
Woofer
MW 152
MW 162
MW 162 GT
Installation dimensions (in mm) Impedance correction
1
2
7
6
3
5
4
1
7
6
5
7
6
5
2
3
4
1
2
3
4
1 Max. Ø 145.5
2 6 holes Ø 4.3 on Ø 134.5
3 3
4 Mounting hole min. Ø 124.5
5 63
6 4.3
7 Max. cone excursion 13
1 Max. Ø 175
2 6 holes Ø 4.3 on Ø 158
3 3
4 Mounting hole min. 136
5 67
6 5
7 Max. cone excursion 15
1 Max. Ø 166
2 4 holes Ø 7.5 on Ø 155
3 Ø 88
4 Min. baffle hole Ø 134
5 62
6 1.5
7 Max. cone excursion 14
circuit
22 μF
4.7 Ω
22 μF
4.7 Ω
22 μF
4.7 Ω
8 Dynaudio Mobile Systems
Technical specifications
MW 172
MW 182
Installation dimensions (in mm) Impedance correction
1
2
7
6
5
4
1
2
7
6
5
3
4
1 Max. Ø 200
2 6 holes Ø 4.2 on Ø 185.75
3 4.2
3
4 Mounting hole min. Ø 172
5 77.9
6 5.4
7 Max. cone excursion 17
1 Max. Ø 239
2 6 holes Ø 4.5 on Ø 219
3 Ø 113
4 Mounting hole min. Ø 195
5 75
6 5.9
7 Max. cone excursion 16
circuit
33 μF
4.7 Ω
47 μF
4.7 Ω
Esotec Series 9
Technical specifications
Esotec systems overview
Two-way systems
System 222 MW 152 – MD 102 X 252
System 242 MW 162 – MD 102 X 252
System 242 GT MW 162 GT – MD 102 X 252
Bass Mid High Crossover
10 Dynaudio Mobile Systems
Three-way systems
Bass Mid High Crossover
System 342 MW 162 MD 142 MD 102 X 362
System 362 MW 172 MD 142 MD 102 X 362
Technical specifications
Esotec Series 11
Connecting the crossover
Connecting the crossover
2-way crossover X 252
Terminal label Connections
17654328
-2dB+2dB 0
Amplifier TweeterWoofer
1 To power amplifier: + terminal
2 To power amplifier: – terminal
3 To woofer: + terminal
4 To woofer: – terminal
5 To tweeter: + terminal, +2dB
6 To tweeter: + terminal, standard
7 To tweeter: + terminal, –2dB
8 To tweeter: – terminal
12 Dynaudio Mobile Systems
Connecting the crossover
1. To connect the woofer
X Connect terminal 3 to the + terminal of the woofer.
X Connect terminal 4 to the – terminal of the woofer.
2. To connect the tweeter
The terminals 5, 6 and 7 provide an adjustment possibility of the sound level. This makes it possible to adjust
the level according to the placement of the speaker in the car and to your personal preference.
X Connect terminal 5 or 6 or 7 to the + terminal of the tweeter:
– just use one of the terminals 5, 6 or 7
– start with terminal 6 for a first setup
– use terminal 5 to increase sound pressure level by 2 dB
– use terminal 7 to decrease sound pressure level by 2 dB
X Connect terminal 8 to the – terminal of the tweeter.
3. To connect the power amplifier
X Connect terminal 1 to the + terminal of the power amplifier.
X Connect terminal 2 to the – terminal of the power amplifier.
Esotec Series 13
Connecting the crossover
3-way crossover X 362
Terminal label Connections
17654328910
Amp Tweeter MidrangeWoofer
-2dB+2dB 0 -2dB+2dB 0
1 To woofer: – terminal
2 To woofer: + terminal
To power amplifier: + terminal
3 To power amplifier: – terminal
To tweeter: – terminal
4 To tweeter: + terminal, +2dB
5 To tweeter: + terminal, standard
6 To tweeter: + terminal, –2dB
7 To midrange: – terminal
8 To midrange: + terminal, +2dB
9 To midrange: + terminal, standard
10 To midrange: + terminal, –2dB
14 Dynaudio Mobile Systems
Connecting the crossover
1. To connect the woofer
X Connect terminal 1 to the – terminal of the woofer.
X Connect terminal 2 to the + terminal of the woofer.
2. To connect the tweeter
The terminals 4, 5 and 6 provide an adjustment possibility of the sound level. This makes it possible to adjust
the level according to the placement of the speaker in the car and to your personal preference.
X Connect terminal 3 to the – terminal of the tweeter.
X Connect terminal 4 or 5 or 6 to the + terminal of the tweeter.
– just use one of the terminals 4, 5 or 6
– start with terminal 5 for a first setup
– use terminal 4 to increase sound pressure level by 2 dB
– use terminal 6 to decrease sound pressure level by 2 dB
3. To connect the midrange
The terminals 8, 9 and 10 provide an adjustment possibility of the sound level. This makes it possible to adjust
the level according to the placement of the speaker in the car and to your personal preference.
X Connect terminal 7 to the – terminal of the midrange.
X Connect terminal 8 or 9 or 10 to the + terminal of the midrange.
– just use one of the terminals 8, 9 or 10
– start with terminal 9 for a first setup
– use terminal 8 to increase sound pressure level by 2 dB
– use terminal 10 to decrease sound pressure level by 2 dB
4. To connect the power amplifier
X Connect terminal 2 to the + terminal of the power amplifier.
X Connect terminal 3 to the – terminal of the power amplifier.
Esotec Series 15
www.dynaudio.com
Dynaudio International GmbH, Ohepark 2, 21224 Rosengarten, Germany, Phone +49 - 4108 - 4180 - 0
ESOTEC
High-End Mobile Loudspeaker Systems
Dynaudio A/S, 8660 Skanderborg, Denmark
Sales & Marketing
© Dynaudio International GmbH, Esotec Manual II 1006,
Item-No. 455235.
All text and image copyrights reserved. Subject to change without notice.
Loading...