Dynatron R18 User Manual

NEW PRODUCT SPEC SHEET

Model Number: R18

• Recommend for Intel® Sandy Bridge - EP / EX Processor, Socket LGA 2011

• Active Cooler for 1U Server

Overall Specification:

• Dimension: 90.0 x 90.0 x 27.7mm

• Weight: 480g ± 5g

• Material: Copper Heat Sink with Skiving Fins

• Fin Direction Paralleled to System Airflow

• Alloy Frame Blower with PWM function

• Convenient Heat Sink Captive Mounting

• Shin-Etsu G751 Thermal Grease Pre-Printed

• Backing Plate is not included

• Support CPU Power 95Watts & up

Blower Specification:

• Model Number: DB128015BU-PWMG

• Dimension: Ø80 x 15 mm

• Bearing: Double-Ball

• Rated Voltage: 12V

• Rated Speed:

o At Duty Cycle 0~20%: 1000±10% RPM
o At Duty Cycle 50%: 3500±10% RPM
o At Duty Cycle 100%: 6000 RPM Min

• Rated Input Power:

o At Duty Cycle 0~20%: 0.60W
o At Duty Cycle 50%: 3.84W
o At Duty Cycle 100%: 14.4W

• Rated Airflow:

o At Duty Cycle 0~20%: 6.5 CFM
o At Duty Cycle 50%: 11.2 CFM
o At Duty Cycle 100%: 19.1 CFM

• Rated Static Pressure:

o At Duty Cycle 0~20%: 2.27 mm-H
o At Duty Cycle 50%: 18.56 mm-H
o At Duty Cycle 100%: 54.5 mm-H

• Rated Acoustical Noise:

o At Duty Cycle 0~20%: 21.5 dBA
o At Duty Cycle 50%: 43.0 dBA
o At Duty Cycle 100%: 55.8 dBA

• Lead Wire Pin Out Diagram :

O

2

O

2

O

2

Pin#1- Ground (-)
Pin#2- Power (+)
Pin#3- Signal (Tachometer Output)
Pin#4- PWM Control

Active Cooler R18 Cooling Performance VS. Airflow & Acoustical Level:

2