How it Works
DynaScan
Loading...
DS551LX4
User Manual
29 pgs775.82 Kb0

DynaScan DS551LX4 User Manual

Professional LCDs
User Manual
The use of diagrams and illustrations in the manual are for reference only. The actual product may be different.
Version 2.00
Product design and specifications are subject to change without notice
Contents
Limited Warranty ....................................................................................................................................2
Material Contents Declaration ................................................................................................................3
Recycling and Energy Information .........................................................................................................3
Declaration of Conformity.......................................................................................................................4
Safety Precautions .................................................................................................................................5
Safety Precautions .................................................................................................................................5
Important Safety Information ..................................................................................................................6
Getting Started .......................................................................................................................................7
Contents .............................................................................................................................................7
Installing and Replacing Remote Control Batteries............................................................................7
Installation...............................................................................................................................................8
Mounting.............................................................................................................................................8
Connecting to a Power Source.........................................................................................................10
Connecting an External Video Source .............................................................................................10
Connecting Multiple Displays for Video Wall Applications ............................................................... 11
Connector Positions .........................................................................................................................13
Input / Output Terminals...................................................................................................................14
Operating Instructions ..........................................................................................................................15
Powering On/Off the Display ............................................................................................................15
Using the Remote Control ................................................................................................................15
Using the Rear Panel Controls.........................................................................................................18
Navigating the On Screen Display (OSD) Menu..................................................................................19
Specifications .......................................................................................................................................23
Input Mode............................................................................................................................................24
Pin Assignments...................................................................................................................................25
Digital RGB Output (DVI-D): DVI......................................................................................................25
Digital RGB Input (DVI-D): DVI ........................................................................................................25
RS-232 Output..................................................................................................................................26
RS-232 Input ....................................................................................................................................26
Troubleshooting....................................................................................................................................27
Limited Warranty
WARRANTY COVERAGE DynaScan's warranty obligations are limited to the terms set forth below: DynaScan warrants its product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of initial installation. If a defect exists, DynaScan will repair the product at no charge. A replacement part assumes the remaining warranty of the original product or NINETY (90) DAYS from the date of replacement or repair, whichever provides longer coverage for you. When a part is exchanged, any replacement item becomes your property and the replaced item becomes DynaScan's property.
OBTAINING WARRANTY SERVICE You must contact DynaScan, identify the unit by model number, serial number and date of purchase, and furnish a brief description of the problem.
EXCLUSIONS AND LIMITATIONS This Limited Warranty applies only to products manufactured by DynaScan that can be identified by the "DynaScan" trademark, trade name, or logo affixed to them. The Limited Warranty does not apply to any non-DynaScan products or any software, even if packaged or sold with DynaScan hardware. Non-DynaScan manufacturers, suppliers, or publishers may provide their own warranties. DynaScan and its Authorized Service Providers are not liable for any damage to or loss of data or other information stored on any media, or any non-DynaScan product or part not covered by this warranty. This warranty does not apply: (a) to damage caused by natural disasters, accident, abuse, misuse, misapplication, neglect; (b) to damage caused by service, including upgrades and expansions, performed by anyone who is not an DynaScan Authorized Service Provider; (c) to a product or a part that has been modified without the written permission of DynaScan; or (d) if any DynaScan serial number has been removed or defaced.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. DYNASCAN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF DYNASCAN CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No DynaScan reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
DYNASCAN IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH DYNASCAN PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. DYNASCAN SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA.
Material Contents Declaration
Polybrominated
chemical substance exceeds the threshold level specified
Hazardous Substances
Part Name
PCBA
CHASSIS
ACCESSORY
PACKAGE
“O” indicates that the level of the specified chemical substance is less than the threshold level specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC. “” indicates that the level of the specified in the standards of SJ/T-11363-2006 and EU 2005/618/EC.
Lead Mercury Cadmium
Pb Hg Cd Cr6+ PBB PBDE
O O O O O O O O O O O O O O O O O O O O O O O O
Hexavalent
Chromium
Biphenyls
Polybromodiphenyl
Ethers
Recycling and Energy Information
DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations.
Energy usage
Mode Energy Consumption
Normal Max. 500 W
Standby < 1 W
Disposal
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new one, the retailer is legally obligated to take back your old appliances for disposal at least for free of charge.
Declaration of Conformity
FCC Verification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Declaration of the Manufacturer
We hereby certify that the Professional LCD DS551LX4 is in compliance with Low Voltage Directive 2006/95/EC Electromagnetic Compatibility Directive 2004 /108 /EC
IEC 60950-1:2005 (2nd Edition) +Am1:2009 EN 60950-1:2006+A11:2009+Am1:2010+A12:2011 EN 55022:2010+AC:2011 Class A ITE EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2008 EN 55024:2010 EN 61000-4-2:2009 EN 61000-4-3:2006+A1:2008+A2:2010 EN 61000-4-4:2012 EN 61000-4-5:2006 EN 61000-4-6:2009 EN 61000-4-8 :2010 EN 61000-4-11:2004
VCCI report ready.
VCCI Class A ITE V-3/ 2013.04 Technical Requirements V-4/ 2012.04 Supplementary Test Conditions for Equipment under Test
DynaScan Technology,
Inc.
Safety Precautions
Do not install the display in a wet environment or place anything filled with liquid such as a vase or beverage on top of it. Do not install the display near flammable objects such as gasoline or other volatile liquids. Do not install the display near any heat sources such as radiators or other heating devices. Do not install the display in the dusty environment. Do not damage the power cord or plug. Do not disassemble the screen to avoid electric shock. The product can normally be operated at an altitude under 2000m. Abnormalities may occur when installing the device at an altitude above 2000m.
The heat sink behind the screen may be hot after extensive use. Do not touch it to avoid being burned. Do not touch the screen panel with sharp objects or extreme pressure to avoid damaging the panel. The display should be installed in well-ventilated place, do not install it in a confined space. Do not drop or allow any objects to fall on the screen. Do not touch the screen with wet hands to avoid electric shock. Unplug the power cord before cleaning the device. Use a soft and dry cloth to wipe the screen off. Do not use alcohol or other chemical liquids. If you smell smoke or hear strange noises, immediately unplug the monitor and contact the vendor. Do not discard this product with general household waste. Be sure to comply with the local waste regulations for disposal. Suitable for mounting on concrete and non-combustible surface only.
IMAGE BURN-IN WARNING
When a stationary or fixed image is displayed on the screen for a long time, the image may be permanently imprinted on the screen. This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen.
CAUTION
WARNING
Important Safety Information
• Disassembling the LCD is strictly prohibited. Opening the cover may expose the user to electric
shock or other hazards. Please contact DynaScan certified service professionals for all maintenance requirements.
• Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water sources.
• Do not place heavy objects on the power cord. A damaged power cord might cause electric
shock or fire.
• Do not bend, twist, or damage the power cord.
• The power cord must comply with the local safety regulations.
• Do not damage or modify the prongs/pins and the ground contact on the power cord plug.
• Do not place the LCD on an unleveled surface or an unstable vehicle. The LCD could fall over
and cause substantial damage.
• Do not cover the vents and/or the heat sink.
• Do not install the LCD beside radiators or other heat sources. The installation site should have
sufficient ventilation so the heat generated by the LCD can be dissipated.
• Do not use the Signage in a hot, humid, dusty, or fumy environment.
• Handle the LCD with care. Save the packaging materials for transport later.
• Clean the LCD backside at least once a month for dust and other particles.
Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs:
• Damaged power cord or power plug.
• If liquid or foreign object has entered the LCD.
• If the LCD has been exposed to rain or water.
• If the LCD has been dropped or the casing has become damaged.
• If any structural damage such as cracks or unnatural vibration is found.
• If the LCD cannot be operated following the steps outlined in this manual.
• If the LCD emits smoke or other odors, or generates strange noises.
Operating Suggestions
• Avoid displaying a stationary image for a long period of time in order to prevent image sticking. Cleaning the Panel
• Use a soft, lint-free cloth to gently wipe the dust off from the screen panel.
• Do not use any hard material to wipe the panel.
• Do not poke the panel with your hand or any sharp object (such as a pen or a nail) or exert
excessive pressure on the panel to prevent any damage.
• Do not use any cleaning solutions on the panel as it might cause discoloration.
Cleaning the Casing
• Unplug the power cord.
• Gently wipe the casing with a soft cloth.
Attention
• Do not use any of the following solutions to clean the casing as they may damage the paint and
cause it to crack or peel: benzene solution, alkaline solution, alcohol-based cleaning solution, glass cleaner, wax, polisher, or detergent.
Getting Started
Contents
Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products.
• DS551LX4 Professional LCD
• Remote Control x 1 pc.
• Batteries (1.5V / AAA) x2 pcs.
• Quick Start Guide x1 pc.
• CD-ROM x1 pc.
Attention: Please use the following table to check whether the included power cord is suitable for your region. If the power cord does not match your region, please contact your local supplier. Please use matching AC socket in order to meet your local safety regulations.
European
Plug Type North America
Plug
Shape
Continental
• Power cable x1 pc.
• RS-232 cable x1 pc.
• DVI cable x1 pc.
• Ethernet crossover cable x1 pc.
Japan Taiwan
Region
Voltage
U.S.A. / Canada
120V 230V 100V 110V
EU
(Except U.K.)
Japan Taiwan
Installing and Replacing Remote Control Batteries
1. Open the battery compartment cover.
2. Insert 2 new AAA batteries.
3. Close the battery compartment cover. Warning:
• Incorrect usage of batteries may cause leakage or explosion.
• Pay attention to the polarity when installing the batteries.
• Do not mix different types of batteries or new and used batteries. Doing so may shorten the
battery life or cause leakage.
• Remove or replace the batteries when they are empty in order to prevent acid leaking in the
battery compartment.
• Do not touch the leaked substance from the batteries in case of a battery leakage. Doing so
may hurt human skin.
Note: If the remote control is not going to be used for a long time, we recommend removing the batteries from the remote control.
Installation
The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible for such incident.
Mounting
• Hanging the Professional LCD from the ceiling or mounting it on the wall is the responsibility of
the user. Not all ceilings or walls provide enough strength to support the LCD. The LCD may drop and cause serious injury if it is hanging from the ceiling with insufficient support or is mounted on a slanted wall. Product warranty does not cover improper installation, modification, or damage caused by natural disasters. DynaScan recommends having certified professionals to evaluate the installation site and perform the mounting operation.
• Do not to cover the vent and/or the heat sink in order to ensure proper heat dissipation.
• Refer to the installation guide provided by the manufacturer for proper mounting.
When mounting on a wall or hanging from a ceiling
• A wall mount is not included in the accessory. Please purchase a VESA Standard wall mount to
secure the LCD. DynaScan is not responsible for the damage caused by using non-standard wall mounts.
• Verify that the mounting location can support the weight of the LCD before installation.
• The installation angle must be within 15 degrees of the vertical axis.
• Do not install the wall mount while the power is turned on as it may cause serious injury due to
electrical shock.
Model Number
DS551LX4
VESA (mm)
(A * C) 600 * 400 (B * C) 400 * 400
Screw
Specification
M6
Screw Length Number
Greater than 10mm Smaller than 12mm
(not including wall
mount thickness)
8
Loading...
+ 20 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use