DynaScan DS0816 User Manual
DS0816
Ground-Stand
Quick Start Guide
1
Contents
Safety Precaution .......................................................................................................................................... 3
Caution ...................................................................................................................................................... 3
Parts Included ............................................................................................................................................... 4
Accessories ................................................................................................................................................ 4
Handling ........................................................................................................................................................ 5
Unpacking the Unit ................................................................................................................................... 5
Installation .................................................................................................................................................. 12
Installing Timer Battery ........................................................................................................................... 12
Display’s Timer Settings .......................................................................................................................... 14
Connecting 220V Power .......................................................................................................................... 16
Operation .................................................................................................................................................... 17
Installing Caster Decorations to Display ................................................................................................. 18
Installing Optional Equipment .................................................................................................................... 21
How to install bottom light box poster ................................................................................................... 21
Options ........................................................................................................................................................ 24
Digital Media Player ................................................................................................................................ 24
Video Input Box ....................................................................................................................................... 24
Maintenance ............................................................................................................................................... 25
Cleaning the displays screen shield ........................................................................................................ 25
Replacing/cleaning display filters ........................................................................................................... 26
Troubleshooting .......................................................................................................................................... 27
2
Safety Precaution
Caution
The display system is not meant for outdoor use.
After shutting down the power to the display, do not touch the printed circuit boards (PCB) and
their components to avoid electric shock.
Checking any electrical wire or any components on the PCBs, turn off the power to the display
and unplug the power cord from the power outlet.
Do not arbitrarily disassemble and change the electric connecting dispositions, cords or
components inside the display system.
Check that the operating voltage of the display system is identical with the voltage of your local
power supply.
Ensure that the display system is grounded correctly.
After the power is shut OFF, do not move the display until the rotating screen reaches a complete
stop.
Do not allow anything to fall into the display chamber or the base.
Do not tilt the display system.
Ensure the location of where the unit is the ambient temperature is less than 30 °C or over 0 °C
Ensure all the cable connectors and the power plugs are connected securely in place before
turning on the display system
Do not move the display system while operating.
Do not unplug the display system while in use.
3
Cover Pieces (Qty 8)
Power Cords (Qty 2)
Box of Filters (Qty 1)
Caster Decorations (Qty 2)
Caster Decoration Brackets (Qty 2)
Power Cable
(Qty 1)
Screws (5mm)
(Qty 12)
Washers (5mm)
(Qty 12)
Parts Included
Accessories
DynaScan Quick Start Guide
Installation Guide and CD’s
DynaScan Quick Start Guide
Installation Guide and CD’s
4
The light box
The upper light
box
Screw layout on the light box
Handling
Unpacking the Unit
The DS0816 is packed in two separate crates, one for the display, and another for the light box.
Step 1: Remove the top cover and the side panels of the crate containing the light box.
Step 2: Lift up the light box and secure it to the installation site.
As shown, you can secure (x2) M10 eye bolts and lift with a fork lift.
5
M12 eye bolts x 3
(included in package)
M10 eye bolt x 2
Step 4: Remove the top cover and the side panels of the crate containing the display.
Step 5: The display comes with (x3) M12 eye bolts.
6
The display
Screw layout on the bottom of the display
Φ16 Guide Pin
Φ16 Guide Pin
Step 6: Lift the display and remove from the crate and place on top of the light box.
7
Wire opening
Transceiver
Fiber connection
(the fiber cable in
left picture
Optical fiber
Alignment studs
Pass-through
for fiber cable
Temperature sensors
(Cable #1069)
Power cable connection
for control box.
Wiring openings
Pass-through hole
for upper light box
power cable
Step 7: a) As shown in the diagram, do not completely set display on the light box.
b) Make sure the fiber cable are routed through the correct openings.
c) Connect the fiber cable.
d) Install the two alignment studs.
8
Temperature sensor
cable #1069
Control Box Cable
No.2
Step 8: Connect the temperature sensor to the control box located inside the light box, shown below.
Step 9: Remove the three M12 eye bolts from the top of the display.
9
Loading...