Quick Guide for
DP-200M/Education (USB)
Congratulations, and thank you for choosing the USB-Version PC
based DynaPulse 200M/Education non-invasive blood pressure
1
monitoring and recording system.
Note: This USB Version DynaPulse (DP-200M/Education/USB) blood pressure monitor applies
standard PC-USB connection to provide Serial DATA communication and DC power to DynaPulse
monitor. USB drivers and DynaPulse software must be installed to your PC for proper operation of
DynaPulse monitor.
I. Install software and getting ready:
Before you start installing DP-200M/Education/USB hardware and software, please check and make
sure you have following items ready:
DP-200M/Education/USB monitor
USB communication cable
Blood Pressure cuff assembly (Use appropriate size cuff)
DP-200M/Education/USB software for Windows CD (Include USB drivers)
A PC with Windows operation system (Windows 2000, XP, Vista or Win-7), and an available
USB communication port.
Getting ready with DP-200M/Education/USB monitor and connect it to a PC:
Install USB drivers: Following instructions on provided Software CD to install correct USB
drivers to your PC.
Connect USB cable, one end to DP-200M and the other end to PC’s USB- port.
Connect Cuff assembly to DP-200M (Use appropriate size cuff for each patient.)
www.DynaPulse.com
USB
2
Equipment Layout – Shown a DP-200M monitor connected with a cuff assembly and to a PC’s USB communication port
Install DP-200M/Education software (a CD or DVD/CD drive is required):
Insert DP-200M/Clinical software CD to CD/DVD drive and closed
Following the on-screen instruction, select correct Window version to install DP-
200M/Education software for blood pressure measurement.
Note: First-time installation of DP-200M software, an automatic COM check window will
appear, click “Continue” to find and select an available COM port.
Read included hardcopy Manual/User’s Guide of DP-200M/Education system for detail
instructions of using/operating and the features of DP-200M/Education software. USB users
may ignore the parts on battery and RS232 sections.
II. Blood Pressure Measurement:
Ready and getting start with a blood pressure measurement:
Go to “Patient” in Main Menu, select “Add” (for first time or a new user), and input
User’s/Patient’s Name and ID. See DP-200M/Education software manual (User’s Guide) for
details.
www.DynaPulse.com
Go to “Measure” in Main Menu, select “Start” and following the on-screen instructions to put
on the cuff and pump up pressure and perform a blood pressure measurement.
3
A successful measurement will display the measured Systolic, Diastolic, Heart Rate and Pulse
waveform, etc.. To keep this measurement, go to “File” and select “Save”. You may enter
comments for this measurement.
www.DynaPulse.com
Blood Pressures:
Arterial pulse display Systolic Diastolic Mean Heart Rate
4
Systolic Cursor position Mean Diastolic Cuff pressure
icon icon icon at cursor position
Note1: If an ERROR window appears, following the instruction, go to Measure” and adjusting the High or Low Range
settings accordingly. Click “Start” to start another measurement.
Other features for reviewing the recorded data:
The Trend Display and Analysis – Go to “Options” and select “Show Trend Window”, a
histogram display of previously recorded blood pressure data will be shown. Select “Analysis”
to perform a statistic analysis.
Go to “Record” in Main Menu and select “Personal Info”, would allow you to input and record,
or edit general personal (patient or it’s owner’s) information.
Go to “Record” in Main Menu and select “Record Table”, a tabulated display of previously
recorded blood pressure measurement data will be displayed.
For other advanced features, please read DP-200M/Clinical manual (User’s guide) page 51-69.
www.DynaPulse.com
Note for DP-200M/Education users:
When you open the DP-200M software, a “User/Patient List” window will display with default
“Activated User/Patient” as “Guest”. Blood pressure measurement CANNOT be saved in the
“Guest” mode!
Find a user/patient from User/Patient List and double click to select it.
Perform blood pressure measurement as described above.
About DynaPulse non-invasive blood pressure and hemodynamic monitoring: DynaPulse DP200M/Education blood pressure monitor applies patented and proprietary Pulse Dynamics
oscillometric methods to derive systolic, diastolic and mean arterial pressure (MAP). It records and
displays arterial pulse waveform for visual identification of irregular heartbeats and/or measuring
artifacts. Via optional DynaPulse Analysis Center (DAC) online analysis service, it can also provide
cardiovascular hemodynamic profiles for advanced managements of Hypertension, CVD and CHF.
For more information, please visit www.dynapulse.com
5
www.DynaPulse.com
Loading...