Dynapar MC200S00, MC201S00, MC210S00, MC211S00 Data Sheet
DYNAPAR brand
VEEDER-ROOT brand
VEEDER-ROOT brand
Predetermining Counters
Electronic Predetermining Counters
Electronic Predetermining Counters
R
Count 2
Three Counters in one
. . . a powerful three
preset counter with
batch control and
production totalizer
2
P
T
R
E
O
E
L
T
D
E
E
A
C
T
T
L
E
R
I
R
O
M
Z
N
I
I
I
N
N
C
I
G
N
G
MAX Count 2 can handle your most demanding positioning, winding,
sequencing and other count/control tasks with its programmable 3-limit
predetermining counter. Preset batch counter and units totalizer features
allow it to automatically direct a batching operation and totalize
production quantity.
■ 6-decade display for all three counters
■ Calibration constant for display scaling
■ Bidirectional and unidirectional count modes
■ Three transistor outputs—optional relays
■ Flexible programming for custom application
■ RS-422/485 data port with selectable baud rate
■ Bright, 0.6" high LED display
■ Sealed NEMA 4 front panel
■ DIN-size panel mounting
■ Non-volatile memory during power loss
MAX Count 2 can accept bidirectional or unidirectional count input from
a variety of encoders, sensing devices, pulse, and contact closure
sources, at speeds to 40 kHz. An RS-422/485 communications port will
support your present needs or future plans for system use.
An easy-to-use display prompted setup mode enables MAX Count 2 to
be cusomized as required for a specific application. Programmable
features include: input correction constant, output hold times and logic,
and decimal point position. The program is retained in non-volatile
memory and can be secured from unauthorized change.
A full numeric keypad with display prompting allows equipment
operators to make quick and accurate changes to preset limit values.
Access to preset limits can be restricted if desired.
SPECIFICATIONS
Input Power: Selectable, 100 to 130 VAC or 200 to 260 VAC, 50/60 Hz, 20
VA (12 VDC @ 0.3 A optional).
Accessory Power: 12 VDC @ 175 mA, short circuit protected.
Main Counter and Totalizer: Programmable x1, x2, or x4 logic; Maximum
Input Frequency: 40 kHz x1, 20 kHz x2, 10 kHz x4.
Calibration Constant: 0.0001 to 9.9999 programmable range.
Program Security: System Lock and User Lock.
Signal Input: Contact closure or 3.5 to 15 VDC square wave @ 3.25 mA
source.
Outputs: 3 solid state, 100 mA sink, 28 VDC max.; 3 SPDT, 5 amp, relays
optional.
Serial Communications: RS-485/422 Differential, ASCII.
Operating Temperature: 32° to 122°F (0° to 50°C)
Model No. Description
MC200S00 MAX Count 2 w/Solid State Outputs, A-B, A+B
MC201S00 MAX Count 2 w/Solid State and Relay Outputs, A-B, A+B
MC210S00 MAX Count 2 w/Solid State Outputs, A-B, A+B, Quad
MC211S00 MAX Count 2 w/Solid State and Relay Outputs, A-B, A+B,
Quad
For 12 VDC operation, change the sixth digit in the model no. from S to D.
For more presets, see MAX Count 6
For position indication, see MAX Position 1
Typical Application:
Reflector
Packaging
Machinery
1
2
3
4
Batch Control
Row Control
Column Control
Add A Input
Automatic Packaging Machinery
Photocell
1
2
3
4
Row
Column
Batch
MAX
Count 2
Dimensions:
5.67"
144 mm
5.35"
136 mm
FRONT SIDE
Panel Dims: Cutout: 2.68" x 5.43". Thickness: 1/16" to 1/4". Depth: 5.68" min.
.39"
10 mm
74 mm
2.91"
5.20"
132 mm
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
.50"
13 mm
2.60"
66 mm
2.11
Loading...