NC1000TX-G
10/100/1000Mbps Gigabit Ethernet PCI Bus Adapter
INTRODUCTION
The new NC1000TX-G Adapter is an exciting new 10/100/1000Mbps high speed Gigabit
Ethernet Adapter. This model is equipped with an Auto-Negotiation function that
automatically supports data transmission bandwidths ranging from 10Mbps - 2000Mbps.
This function smoothly and automatically switches drivers between 1000Mbps, 100Mbps
and 10Mbps, Full or Half-Duplex, LAN connections. The Adapter runs in 32-bit bus
master mode. The NC1000TX-G comes with drivers for all major operating systems.
FEATURES
Support IEEE 802.3, 802.3u, and 802.3ab standards
IEEE 802.3x Full-Duplex Flow Control support.
IEEE 802.1p Layer 2 priority queuing support.
IEEE 802.1q Virtual LAN (VLAN) Tag and Jumbo Frame support.
PCI v2.2 32 bit, 33/66 MHz Bus compliant.
Auto-Negotiation support for Auto-Detect 10/100/1000Mbps data rate and Full/HalfDuplex operation mode.
Automatic crossover support for crossover or regular cable.
Wake-on-LAN and remote Wake-up support.
PRODUCT SPECIFICATION
Fiber Mode
Standards
Bus Type
Network Interface
Network Modes
Supported
LED indicators
Environment
Dimensions
Single-Mode
1000BASE-T: IEEE 802.3ab
100BASE-TX: IEEE 802.3u
10BASE-T: IEEE 802.3
PCI-Bus specification revision 2.2
One (1) shielded RJ-45 phone-type jack
1000BASE-T: 4 pair Category 5 TP cable required
100BASE-TX: 2 pair Category 5 TP cable required
10BASE-T: 2 pair Category 3, 4, and 5 TP supported
Full-Duplex available in three modes
Four green LEDs support for display 1000Link,
100Link, 10Link, Activity status
Operating Temperature: 0° ~ 55° C (32° ~ 131°F)
Storage Temperature: -20° ~ +70° C (-4° ~ 158°F)
Humidity: 10% ~ 90% Non -Condensing
119.9 x 51 mm (4.72 x 2 inches)
APPLICATIONS
Included drivers for:
Windows 98/98SE/ME/NT4.0/2000/XP
Linux kernel 2.2.x/2.4.x
Novell Server 4.x/5.x
MAC OSX (Version 10.1.x/10.2.x)
FreeBSD 4.x
Solaris 7/8
Novell Client for DOS
Dynamode
Loading...