DYNAMIX HP-20C
HomePNA 2.0 Ethernet Bridge
User Manual
I
I
NNTTRROODDUUCCTTIIOON
N
The HomePNA2.0 Switch HP-20C enables you to set up your
private network at home with your existing telephone lines.
No additional network wiring is necessary. You may just
find a RJ-11 phone jack in the wall, put the phone line plug
into the jack, and you can then be ready to access the
broadband Internet.
No extra driver is necessary. No driver, no setting, just link.
Simply plug and play.
Via the RJ-45 Ethernet ports, you can connect HP-20C with
Ethernet-interface devices such as Set-Top-Box, Camera Server,
Switch/Hub, and so on. The high-speed of 10Mbps will bring you to
enjoy the Video-On-Demand (VOD) services or the Media-OnDemand (MOD) services.
With HP-20C, SOHO can even quickly extent or flexibly change
the existing LAN environment. No re-wiring more and no more
trouble.
F
F
EEAATTUURREES
S
10Mbps HomePNA Port as Home Network Backbone by
Using Existing Phone Lines.
Two 10/100M Fast Ethernet Ports for ADSL Modem, Cable
Modem, and Ethernet Terminals such as PC, Set-Top-Box,
Switch/Hub, and so on.
Maximal Distance up to 1000 Feet on HomePNA Port.
Plug & Play.
Compact Size Design.
S
S
PPEECCIIFFIICCAATTIIOONNS
S
Network Standards
z HomePNA V2.0
z IEEE802.3
z IEEE802.3u
z IEEE802.3x
Operating System
z Without Limitation
Connectors
z Ethernet : Two RJ-45 Ports
z HomePNA : Two RJ-11 Ports, One for HomePNA, the
Other One for Phone-Line Bypass
DIP Switch
z Two DIP Switches, “1” for Transmission Priority Setting,
and “2” for Transmission Speed Setting
Transmission Speed
z Up to 10Mbps
Transmission Distance
z Up to 1000 Feet
Interface Speed
z 10/100Mbps Fast Ethernet
Indicators
z
“Power”, the LED will Light up When the Power Is On
z
“HomePNA Link/Activity”, the LED will Illuminate When
the Connection Is Successfully Running, and It will Flash
When the Data Is Transmitting
z
“Ethernet Link/Activity”, the LED will Illuminate When
the Connection Is Successfully Running, and It will Flash
When the Data Is Transmitting
Power Requirement
z External Power Supply : Input 100 ~ 240 VAC, 50/60HZ ;
Output 5 VDC
z Consumption : < 6 Watts
EMI/EMC
z Comply with FCC Part 15
z Comply with CE CISPR
z Comply VCCI
PTT Approval
z Comply with FCC Part 68
z Comply with JATE
Environmental Conditions
z Operating Temperature : 0℃ ~ 40℃ (32℉ ~ 104℉)
z Storage Temperature : –10℃ ~ 65℃ (14℉ ~ 149℉)
z Operating Humidity : 10% ~ 95%, Non-condensing
Physical Dimension
z 114mm (W) x 67mm (D) x 25mm (H)
Unit Weight
z
105g
P
P
AACCKKAAGGEE CCOONNTTEENNTTS
S
1. One HomePNA2.0 Switch HP-20C
2. One RJ-11/RJ-11 Connecting Line
3. One RJ-45/RJ-45 Connecting Line
4. One 110~240VAC 2A AC Adapter
5. User’s Guide in Electronic PDF File
I
I
NNSSTTAALLLLAATTIIOON
N
1. Open the carton and make sure yourself the stuffs inside
are as same as the PACKAGE CONTENTS listed above.
Please contact your dealer for replacing in case any item is
missing or damaged.
2. Take out the HP-20C and power it on with the AC Adapter.
3. Take out the RJ-45/RJ-45 connecting line. Plug one end into
the “LAN1” port on the rear panel of the HP-20C and
connect the other end with your ISP access node, such as
the ADSL modem or the Cable modem.
4. Connect the other end of the RJ-11/RJ-11 line from the inline telephone splitter or the splitter port of the ADSL
modem with the “PHONE” port on the rear panel of the
HP-20C. (In Cable modem’s cases, you may leave the
“PHONE” port free from any other connection or just
connect it with a telephone extension. For those cases
without splitter, the connection will be as same as Cable
modem’s.)
5. Take out the last RJ-11/RJ-11 line and simply plug one end
into the RJ-11 phone jack in the wall at your home and
connect the other end with the “HPNA” port on the rear
panel of the HP-20C. The high-speed broadband home
network is then successfully established.
6. For the “LAN2” port on the rear panel of the HP-20C, you
may connect it with the Ethernet port of your PC, Set-TopBox, or Switch/Hub.
7. To connect with your home network in the other rooms, just
simply plug one end of the RJ-11/RJ-11 line into the phone
jack in that room and link the other end with your PC
through another HP-20C.
You may then share the broadband Internet at any place in
your house.
8. To connect with the Set-Top-Box or Camera Server in any
room, procedures are similar to previous step. You may
simply plug one end of the RJ-11/RJ-11 line into the phone
jack in that room and link the other end with the Ethernet
port of your Set-Top-Box or Camera Server through a HP-20C
9. For SOHO, using HP-20C and RJ-11/RJ-11 lines, you can
quickly extent or flexibly change the existing LAN
environment in your office by simply plugging the RJ-11/RJ11 line into any phone jack.
C
C
AAUUTTIIOONNS
S
The default setting of the DIP switch is “Lo” for “1” and also
“Lo” for “2”. It is not necessary to make any adjustment in
the beginning.
You may change the position of DIP switch “2” from “Lo” to
“Hi” to improve the transmission speed in case the phone
line condition is good.
For the cases of installation more than two HP-20C, you
may remain the DIP switch “1” of the HP-20C which linked
directly with the ADSL modem or the Cable modem
unchanged at position “Lo” and then change the position of
this switch of the other HP-20C from “Lo” to “Hi”. The
transmission performance will therefore be enhanced.
Loading...