Dynamic Cooking Systems CPU-48 User Manual
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.dcsappliances.com
www.dcsappliances.com p. 888-936-7872
PRODUCT DIMENSIONS (INCHES)
CPU-48
Models
CPU-36
Models
A
Overall depth of product 28” 28”
B
Distance between countertop level and top surface of product
(excluding grates)
5
/
16
”
5
/
16
”
C
Height of product 8 –
5
/
16
” 8 –
5
/
16
”
D
Depth of product (control panel projecting from cabinet face) 24” 24”
E
Depth of control panel 2 –
1
/
2
” 2 –
1
/
2
”
F
Overall width of product 47 –
7
/
8
” 35 –
7
/
8
”
PROFESSIONAL COOKTOP PRODUCT DIMENSIONS
CPU-48 Models & CPU-36 Models
A
B
C
D
E
F
Left Side View
Front View
Countertop level
Cabinet face for installation
with projecting control panel
Cabinet face for installation
with flush control panel
1 –
19
/
32
“ To center line
of gas inlet
Product dimensions and specifications are listed as a guide only. For complete installation instructions and specifications, refer to the product Use & Care Guide/Installation Instructions available at www.dcsappliances.com
www.dcsappliances.com p. 888-936-7872
CABINETRY DIMENSIONS (INCHES)
CPU-48
Models
CPU-36
Models
A
Min. Width of cabinetry opening 48” 36”
B
Maximum depth from wall to cabinet face 24 ” or 26 –
1
/
2
”* 24 ” or 26 –
1
/
2
”*
C
Height from bottom of cabinet cutout to counter surface 8” 8”
D
Width of electrical and gas supply area 17” 7”
* 24” for installation with projecting control panel, 26 –
1
/
2
” for installation with flush
control panel.
PROFESSIONAL COOKTOP CABINETRY DIMENSIONS
CPU-48 Models & CPU-36 Models
!
A
B
C
D
Min. 48” wide hood for 48” models
Min. 36” wide hood for 36” models
30” Min.
36” Min.
for best smoke
elimination
18” Min.
2”
16”
Cooking Surface
Electrical and
Gas Supply
12” Min. to
combustible
material
,
each side
13”
Max.
CAUTION
36” Min. to
combustible
material
,
from cooking
surface
As defined in the “National Fuel Gas Code”
(ANSI Z223.1, latest edition).The horizontal
surfaces of the cooktop trim must not be below
countertop level.
30"
12" Min. to Combustibles
without Backguard
15/16"
12"
Wall Mount
Low Backguard
Base Cabinet
Wall Mount
Full Backguard
36” Min. to
Combustibles
36” Min. to
Combustibles
Base Cabinet
A B
26 – 1/2
As defined in the “National Fuel Gas Code” (ANSI Z223.1, latest edition).
Loading...