Dynamic TB002 User Manual

GIRAFFE POWER PRO

PREVENTATIVE MAINTENANCE CHECK LIST

AFTER EVERY USE

1- Unplug and inspect power cord
2- Wash machine thoroughly and wipe down
3- Disassemble the cutter blade bell by using the
hook wrench (illustrated below -#9388) following
the arrow direction
4- Clean and wash all accessories and check that there is
no residue remaining
5 For the pump (#TB030), make sure to rinse hose(s)
thoroughly. Check the general condition
of the cutter blade bell before storing

# 9388

ANNUALLY

1- Check the condition of the following transmission parts:

• Motor drive belt (#0625) for deterioration, wear and tension

• Pulleys (#9362 and #9363)

• Bearing accessories and replace if necessary

2- Check the height adjustment and guidance system
3- Check safety switch (#9373)
4- Check all caster wheels and brakes
5- Check the operation of the control box

(on/off switch, emergency stop and variable speed control)

0625

9362

9363

9373

MONTHLY

1- Check the condition of the coupling accessory (#9357 and #9380)
2- Check the condition of joint, lip rings and

waterproof seal (#0639, #0662 and #0665)
3- Check the wear of the active parts of the accessories:

• Knife (#9356) of the mixer bell attachment (#TB012)

• Hammer blade (#08999920)

of the blender bell attachment (#TB004)

• Tines of the whip tool attachment (#TB003)
4- Sharpen knife (#9356) if necessary

5- Check tightness of screws

9357

0639
089912

9358
0618

089926

0662

9359

9356

9380

0639

079911

9381

08999912

9382

08999922

089958

9383

9384

0659
9359

0662
9386

9357

0639

08999921

079977

0665

08999920

# TB012 # TB003 # TB004