Dynalite SLRA-3020, SLRB-3020 User manual

1
USER GUIDE
SOFTBOX
Please read this manual before assembling SOFT BOX, and keep it for future reference.
Referez-vous au mode demploi avant dutilizer la softbox.
2
Index
Introduction Intellectual Property Safety Introduction Unpacking Assembling Rime Lite Softbox Accessories Warranty
P03 P03 P04 P05 P06 P07 P10
3
INTRODUCTION
Thank you for your choice for Rime Lite Softbox.
Rime Lite Softbox is designed for professional photographers. It gives quicker and easier operation and great satisfaction for professional photographers.
Rime Lite telecommunications
Web: www.rimelite.com
Facebook: rimelites
Twitter: @rimelites
Mail : info@rimelite.com
Headquarters: Hyundae Photonics B/D, 118-16, Chimsan-Dong, Buk-Gu, Daegu, South Korea.
Tel: 82–53–359–1445 / Fax: 82–53–359-0333
INTELLECTUAL PROPERTY
All intellectual property, owned by or which is otherwise the property of Rime Lite or its respective suppliers relating to Rime Lite Softbox, including but
not limited to, accessories, parts, or software, is proprietary to Rime Lite. No title to or ownership in the intellectual property is transferred to you. All
applicable rights of the intellectual Property shall remain with Rime Lite and its suppliers.
4
Safety Instructions
Please read and understand all the instructions to avoid injury to yourself and/or damage to
- Do not expose to extream temperatuers ( above 140 or below -4, or above 60 or below -20).
- Do not expose to moisture. Do not use Rime Lite Softbox near water.
- Do not let any foreign matter spill into Rime Lite Softbox
- Do not expose to chemicals such as benzene and thinners. Do not use liquid or aerosol cleaners. Clean with a soft damp cloth only.
- Do not expose to direct sunlight or heat sources for a prolonged period.
- Do not try to disassemble and/or repair Rime Lite Softbox yourself.
- Do not subject Rime Lite Softbox to severe impact,
- Do not place heavy objects on Rime Lite Softbox.
- Do not jubject XB PRIME to excessive pressure.
- Do not touch XB PRIME with wet hands
- Do not store in dusty areas.
Rime Lite Softbox
Please be aware that Rime Lite claims no responsibility for damage from data loss due to breakdwon, repair, or other causes.
5
Unpacking
Your package contains the following items.
Softbox Dome Rods Inner Diffuser Front Diffuser
You can obtain the following accessories for Rime Lite Softbox from your local dealer:
Speedring Adapter
6
Assembling Rime Lite softbox
1. Check each hole number on Speedring.
2. Insert Rods into speedring according to Diagonal direction.
- Square & Rectangular box = G1 – G3 – G2 – G4
- Strip box = S1 – S3 – S2 – S4
- Octagon box = G1 – G3 – G2 – G4 – B1 –B3 – B2 – B4 Exception -Grand softbox = 1 – 2 3 4 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 15 16
3. After completing inserting the rods, check out each rod is inserted correctly.
4. Tuck up the release corner of the softbox like below images.
Installing Inner diffuser: Connect each hook to the strap of inside of the softbox.
Attaching Front Diffuser: Attach front diffuser on the Velcro of softbox.
Refer to a video entitled How to set up Rime Lite softbox on Youtube
Grandsoftbox
7
Accessories
8
9
Fabric
10
Rime Lite is free of defects in material and workmanship for a period of twenty four (24) months from the original
date of purchase by the consumer.
If during the period of warranty this product proves defective under normal use and service, you should return the
product to the retailer from whom it was originally purchased, or to any Rime Lite authorized dealer or authorized
service center, if outside the time limit for returns imposed by the retailer.
- Warranty Conditions
1. The warranty is only valid presentation of the proof purchase consisting of original invoice or sales slip
confirmation, indicating the date of purchase, retailers name, model and serial number. Rime Lite reserve
the right to refuse warranty service if this information has been removed or changed after the original
purchased of the product from the retailer.
2. Rime Lite’s sole obligations are to the repair of the defective part, or at its discretion, replacement of the
product (service exchange unit)
3. Warranty repair must be carried out by an authorized Rime Lite dealer/ service center. No reimbursement
will be made for repairs carried out by non-Rime Lite, and warranty coverage will not be valid for any
repairs or damage caused by such repairs.
4. Repair or replacement under the term of this warranty does not give right to extension to or a new
starting of the period of warranty. Repair or direct replacement under the terms of this warranty may be
fulfilled with functionally equivalent service exchange units.
5. The warranty is not applicable in cases other than defects in material and workmanship. The warranty does
not cover the following:
A. Periodic checks, maintenance, repair, and replacement of parts due to normal wear and tear. B. Abuse or misuse, including but not solely limited to the failure to use this product for its normal
purpose in accordance with Rime Lite’s instructions for usage and maintenance.
C. Failure of or damage to the product arising from incorrect installation or use inconsistent with technical
or safety standards, or failure to comply with product manual instructions.
Loading...