Dyna-Glo DGG424RNP-D User Manual

3 BURNER

PREMIER GAS GRILL

Model #DGG424CNP/DGG424CNP-D/

DGG424RNP/DGG424RNP-D

Français p. 30

Français p.

Español p. 59

Español p.

ATTACH YOUR RECEIPT HERE

Serial Number _____________________________ Purchase Date ______________________

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday or e-mail us at customerservice@ghpgroupinc.com.

Rev. 10/22/2019

TABLE OF CONTENTS

Safety Information ...................................................................................................................... 3

Package Contents ...................................................................................................................... 5

Hardware Contents .................................................................................................................... 6

Preparation ................................................................................................................................. 6

Assembly Instructions ................................................................................................................ 7

Operation Instructions ................................................................................................................. 17

Care and Maintenance ................................................................................................................. 22

Troubleshooting ........................................................................................................................... 25

Warranty ...................................................................................................................................... 27

Replacement Parts List .............................................................................................................. 28

Assembler/Installer: This manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Retain these instructions for future reference.

If you smell gas:

DANGER

1. Do not store or use gasoline or

WARNING

other ammable liquids or vapors

in the vicinity of this or any other

1. Shut off gas to the appliance.

2. Extinguish any open ame.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call your

local re department.

appliance.

2. An LP (liquid propane) cylinder not connected for use shall not be stored

in the vicinity of this or any other appliance.

3. This grill is for outdoor use only

and shall not be used in a building,

garage, under overhangs or any other enclosed area.

4. Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install

the product. If you have any questions regarding the product, please call customer service at:

1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday.

DANGER

• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible

materials, gasoline and other ammable vapors and liquids.

WARNING

This product and the fuels used to operate this product (liquid propane), and the products of

combustion of such fuels, can expose you to chemicals including benzene, which is known to the State of California to cause cancer and reproductive harm.

For more information go to www.p65Warnings.ca.gov

CAUTION

• Never use charcoal or lighter uid with the grill.

• Do not use gasoline, kerosene or alcohol for lighting.

• The LP gas cylinder used with this appliance must be:

(a) Constructed and marked in accordance with the Specications for LP-Gas Cylinders

of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commision, as applicable; and

(b) Provided with a listed overlling prevention device.

(c) Provided with a cylinder connection device compatible with the connector for outdoor cooking appliances. This grill is not intended to be used in or installed on recreational vehicles and/or boats.

• Never keep a lled container in a hot car or car trunk. Heat will cause the gas pressure to

increase, which may open the relief valve and allow gas to escape.

• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn you severely.

SAFETY INFORMATION

WARNING

• Do not place the grill under overhead combustible construction or awnings. Minimum clearance from sides and back of unit to combustible construction, 36 inches (914.4mm) from sides and back.

NOTE: The installation must conform with local codes or, in the absence of local

codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and

Handling Code, B149.2.

CAUTION

36in

914.4mm

36in

914.4mm

• Do not store or use gasoline or other ammable liquids or vapors in the vicinity of this or any

other appliance.

• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other

appliance.

• This grill is for use with propane gas only (propane cylinder not included).

• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer,

motor home or house.

• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked

when not moving the grill.

• Do not use the grill unless it is completely assembled and all parts are securely fastened and

tightened.

• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all

times.

• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid

burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).

• Do not alter this grill in any manner.

• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts,

or leaks, the hose must be replaced prior to operating the appliance. The replacement hose

assembly will be that which is specied by the manufacturer.

• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.

• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill

before each use. Do not obstruct the ow of gas or ventilation air.

• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to

properly assemble or safely operate the grill.

• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

• Do not place this grill on any type of tabletop surface. The grill should be placed on a at and

level surface.

• Do not use the grill in high winds.

PACKAGE CONTENTS

X Y

PART DESCRIPTION QUANTITY

A Lid Handle 1 B Firebox Assembly 1 C Warming Rack 1 D Cooking Grate 2 E Heat Tent 3

F Grease Cup 1 G Grease Pan 1 H Knob 3

I Left Side Shelf Assembly 1

J Left Side Shelf Front Assembly 1 K Right Side Shelf Assembly 1

L Right Side Shelf Front Assembly 1 M Cart Left Side Panel Assembly 1

PART DESCRIPTION QUANTITY

N Cart Right Side Panel Assembly 1 O Cart Rear Panel 1 P Cart Bottom Shelf Assembly 1 Q Caster 2 R Caster With Brake 2 S Cart Front Brace 1 T Left Door Assembly 1 U Door Handle 2 V Right Door Assembly 1

W Magnet 1

X Temp Gauge 1 Y Temp Gauge Bezel 1

HARDWARE CONTENTS (shown actual size)

M6x16

Bolt

Qty. 33

M4x12

Bolt

Qty. 16

Wrench

Qty. 1

CCAA BB DD

M6x25

Bolt

Qty. 2

Plain Washer

Qty. 2

Spring Washer

Qty. 2

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 50 minutes with 2 people.

Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle

CAUTION

THIS UNIT IS HEAVY. Two people required for safe assembly.

Two people required for safe assembly. Some parts may contain sharp edges. Wear protective

gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use.

ASSEMBLY INSTRUCTIONS

1. Attach the two casters (Q) and the two casters with brake (R) to the cart bottom shelf assembly (P) with the wrench (FF).

Hardware Used

Wrench

x 1

2. Attach the magnet (W) to the cart bottom shelf assembly (P) with two M4x12 bolts (BB).

Hardware Used

M4x12 Bolt x 2

ASSEMBLY INSTRUCTIONS

3. Pre-assemble four M6x16 bolts (AA) onto the cart bottom shelf assembly (P) and do not tighten them. Make sure to leave a 5mm gap between the bolt and the panel. Then hang the cart left side panel assembly (M) and the cart right side panel assembly (N) onto the bolts and tighten the four bolts.

Hardware Used

M6x16 Bolt

x 4

4. Attach the cart front brace (S) to the cart left side panel assembly (M) and the cart right side panel assembly (N) with four M6x16 bolts (AA).

Hardware Used

M6x16 Bolt

x 4

ASSEMBLY INSTRUCTIONS

5. Pre-assemble four M6x16 bolts (AA) onto the cart left side panel assembly (M) and the cart right side panel assembly (N) and do not tighten them. Make sure to leave a 5mm gap between the bolt and the panel. Then hang the cart rear panel (O) onto the bolts and tighten the four bolts. Attach the cart rear panel (O) to the cart bottom shelf assembly (P) with one M6x16 bolt (AA).

Hardware Used

M6x16 Bolt

x 5

6. Attach the door handle (U) to the left door assembly (T) and the right door assembly (V) with four M6x16 bolts (AA).

Hardware Used

M6x16 Bolt

x 4

ASSEMBLY INSTRUCTIONS

7. Attach the left door assembly (T) and the right door assembly (V) to the cart left side panel assembly (M) and the cart right side panel assembly (N) with eight M4x12 bolts (BB).

Hardware Used

M4x12 Bolt

x 8

8. Pre-assemble two M4x12 bolts (BB) onto the left side shelf front assembly (J) and do not tighten them. Make sure to leave a 5mm gap between the bolt and the panel. Then hang the left side shelf assembly (I) onto the bolts and tighten the two bolts. Attach the left side shelf assembly (I) to the left side shelf front assembly (J) with one M4x12 bolt (BB).

Hardware Used

M4x12 Bolt

x 3

ASSEMBLY INSTRUCTIONS

9. Pre-assemble two M4x12 bolts (BB) onto the right side shelf front assembly (L) and do not tighten them. Make sure to leave a 5mm gap between the bolts and the panel. Then hang the right side shelf assembly (K) onto the bolts and tighten the two bolts. Attach the right side shelf assembly (K) to the right side shelf front assembly (L) with one M4x12 bolt (BB).

Hardware Used

M4x12 Bolt x 3

10. Attach the lid handle (A) to the rebox assembly (B) with two M6 plain washers (DD), two M6 spring washers (EE) and two M6x25 bolts (CC).

Hardware Used

M6x25 Bolt

M6 Plain Washer

M6 Spring Washer x 2

x 2

ASSEMBLY INSTRUCTIONS

11. Remove pre-assembled wing nut and plain washer from the temp gauge (X), then attach the temp gauge (X) and the temp gauge bezel (Y) to the rebox assembly (B). Secure the temp gauge (X) with the wing nut and plain washer removed earlier in this step.

12. Attach the three knobs (H) to the valve stems.

ASSEMBLY INSTRUCTIONS

13. Carefully place the rebox assembly (B) onto the cart left side panel assembly (M) and the cart right side panel assembly (N). Adjust the

rebox assembly (B) so that the holes in the rebox assembly (B) are aligned with holes in

the tabs of the cart left side panel assembly (M) and the cart right side panel assembly (N). Note: Make sure the gas hose/regulator assembly is outside the cart. Secure the rebox assembly (B) with four M6x16 bolts (AA).

Hardware Used

14. Insert two M6x16 bolts (AA) in right side of the rebox assembly (B) as shown, leaving 5mm of threads exposed. Align key hole in the right side shelf assembly (K) with the two bolts just inserted in the rebox assembly (B), and insert four M6x16 bolts (AA) in the remaining

holes in the rebox assembly (B). Adjust the rebox assembly (B) correctly, then tighten all

bolts.

M6x16 Bolt

x 4

Hardware Used

M6x16 Bolt

x 6

ASSEMBLY INSTRUCTIONS

15. Insert two M6x16 bolts (AA) in left side of the rebox assembly (B) as shown, leaving 5mm of threads exposed. Align key hole in the left side shelf assembly (I) with the two bolts just inserted in the rebox assembly (B), and insert four M6x16 bolts (AA) in the

remaining holes in the rebox assembly (B). Adjust the rebox assembly (B) correctly, then

tighten all bolts.

Hardware Used

M6x16 Bolt x 6

16. Place three heat tents (E) over each burner.

ASSEMBLY INSTRUCTIONS

17. Put two cooking grates (D) and one warming rack (C) in place.

18. Put the grease pan (G) and grease cup (F) into place.

ASSEMBLY INSTRUCTIONS

19. Open the left door assembly (T) and the right door assembly (V). Place LP gas cylinder (sold separately) into the nesting hole located on the cart bottom shelf assembly (P). Rotate the LP gas cylinder until the hose/regulator coupling aligns with the threaded valve of the cylinder. Hand tighten the hose/regulator coupling to the threaded valve of the LP gas cylinder. Tighten the tank screw clockwise

in the front of the cart until the LP gas cylinder is secured in place inside the nesting hole of the cart bottom shelf assembly (P)

Fully Assembled

Tank

Screw

LP Gas

Cylinder

OPERATION INSTRUCTIONS

CHECKING FOR LEAKS

After all connections are made, check all connections and ttings on the LP gas tank valve, gas hose

and regulator for leaks with a water and soap solution.

To prevent re or explosion while testing for a leak:

• Always perform leak test prior to lighting the grill.

• Do not smoke while testing for a leak.

• Always perform leak tests outdoors in a well-ventilated area.

• Do not use any source of ame while testing for leaks.

• Do not use the grill until any and all leaks are corrected.

• If you are unable to correct a leak, disconnect the propane supply and call a gas appliance service dealer.

PERFORM LEAK TEST

• Prepare leak test solution by 50/50 ratio of liquid dish soap and water. Total solution required is approximately 2 - 3 ounces (70 - 90 ml).

Put leak test solution in a spray bottle.

• Ensure all control knobs are in the

• Connect the gas hose to the gas supply.

• Open the LP gas tank valve.

• Spray leak test solution on all gas carrying connections and ttings. Presence of bubbles at areas

of applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off the gas supply valve immediately and repair or replace the defective part. Do not use the grill until all leaks are corrected.

O OFF position.

CAUTION

Only use the regulator and hose assembly provided! If a replacement is necessary, please call our customer service center. Do not use replacement parts that are not intended for this grill.

WARNING

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

OPERATION INSTRUCTIONS

CONNECTING GAS CYLINDER

The propane gas supply cylinder to be used must be constructed and marked in accordance with the

Specications for LP Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National

Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous

Goods; and Commission, as applicable; and provided with a listed overlling prevention device.

Use only 20-pound cylinders (height: 18.11 inches, tank diameter: 9.84 inches, foot diameter: 8.03 inches) equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances.

The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or handled roughly!

If the appliance is not in use, the gas cylinder must be disconnected. Storage of an appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area. Your cylinder must never be stored where temperatures can reach over 125°F.

Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

Before connection, be sure that there is no debris caught in the outlet of the gas cylinder, outlet of the regulator valve or in the outlet of the burner and burner ports. Connect regulator valve and

hand-tighten rmly. Keep the propane cylinder valve closed and disconnect the propane cylinder from

the regulator valve when the grill is not in use.

DO NOT obstruct the ow of combustion air and ventilation air to the grill. The propane cylinder must be arranged for vapor withdrawal and equipped with a listed overlling prevention device. Please use

the proper cylinder orientation to provide vapor withdrawal. NOTE: The cylinder must be fully upright for the cylinder to have vapor withdrawal only.

CAUTION

a. Do not store a spare LP-gas cylinder under or near this appliance.

b. Never ll the cylinder beyond 80 percent full. c. If the information in (a) and (b) is not followed exactly, a re causing death or serious

injury may occur.

OPERATION INSTRUCTIONS

NOTE: Other cylinders may be acceptable for use with this appliance provided they are compatible

with the appliance nesting hole and retention means. Refer to Step 19 of the Assembly Instructions for correct cylinder to cylinder holder connection.

WARNING

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

CONNECTING THE LP TANK

1. The knob on the LP tank must be closed. Make sure that the knob is turned clockwise to a full stop. The cylinder supply system must be arranged for vapor withdrawal.

2. Check that the control knob on the control unit is turned off.

3. Remove the protective cap from the LP tank valve and coupling nut.

4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple is centered in the valve outlet. The coupling nut connects to the large outside threads on the valve outlet. Use care – do not cross thread the connection.

5. Hand-tighten the coupling nut clockwise until it comes to a full stop. Firmly tighten by hand only. Do not use tools. To Disconnect: Fully close the tank valve by turning clockwise. Turn the coupling nut counterclockwise until the regulator assembly detaches.

WARNING

In the connection process, make sure:

• the regulator inlet connector mates with the cylinder valve outlet properly, safely and rmly, and;

• the LP gas hose does not come in contact or remain in contact with the rebox.

OPERATION INSTRUCTIONS

Lighting The Grill

Before rst use:

Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed and the control knob in the highest position. This will clean the internal parts by burning off any residue and odor from the manufacturing process.

CAUTION

If the ame extinguishes accidentally during ignition or operation, immediately TURN OFF the cylinder valve and then TURN OFF the control knob.

WARNING

Do not lean over grill when lighting. Read instructions before lighting. Do not put pots on the sear side burner. Using pots on the sear side burner will result in high carbon monoxide levels.

1. Check that the control knobs are in the

2. Open the tank valve fully by turning it counter-clockwise.

3. Open the lid during the lighting process.

4. Depress and turn the control knob counter-clockwise from the OFF position, past the ignite position, to the HIGH position. You may need to repeat this several times to ignite the burner.

If ignition does not occur in 5 seconds, turn the control knob(s) to the OFF position, wait 5 minutes, and repeat the lighting procedure.

If the burner still does not light, check that there is gas in the cylinder and follow the match lighting instructions. Check the Troubleshooting Guide on page 26 for more information.

OFF position.

OPERATION INSTRUCTIONS

LIGHTING THE GRILL WITH A MATCH

1. Open the lid.

2. Insert a match in the end of the match holder that is installed on the inside of the cabinet door.

3. Light the match.

4. Immediately place the lit match through the spaces in the grill gates near the ports of the burner between the heat tents as shown. Make sure the lit match is close to the burner ports.

5. Press in the control knob that operates the burner and rotate counter-clockwise to position and burner should light immediately.

6. Repeat 2~5 steps to lighting the remaining burners.

7. Adjust burners to desired cooking settings.

High

CAUTION

Make sure all burners controls are off except for the burner being lit and the burners that have been lit.

WARNING

If ignition does not occur in 5 seconds, turn the control knob(s) to “ ” OFF position, wait 5 minutes, and repeat the lighting procedure.

Main Burner Match Lighting

SHUTDOWN INSTRUCTIONS

1. Turn control knobs clockwise to the

2. Close valve at tank fully by turning clockwise.

3. Close lid.

Turn off LP supply at cylinder when appliance is not in use.

O OFF position.

CARE AND MAINTENANCE

Cooking Grates

The best time to ‘burn-off’ the cooking grates is after every use (approx. 15 minutes). The grill is

already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’.

To ‘burn off’ or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.

The porcelain grates have an enamel nish (similar to glass) and should be handled with care

not to chip.

CAUTION

Ensure the grill is cool before cleaning and conducting maintenance and with the gas supply

turned off at the LP-Gas Cylinder.

Recommended Cleaning Supplies

Mild liquid dish soap, warm water, nylon cleaning pad, wire brush

DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.

Outside Surfaces

It is recommended to use only mild dish soap and hot water to clean grill and grill parts. Rinse with warm water.

Inside Bottom Pan of Grill Body

To avoid are-ups, the bottom pan of the cooking box should be kept clean on a regular basis.

Remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and warm water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.

Heat Tents

Clean residue with wire brush and wash with mild dish soap and warm water. Rinse with warm water.

Grease Cup

Empty the grease cup and clean with mild dish soap and warm water on a regular basis.

Checking The Flame

For maximum fuel efciency and cooking performance, ame

should be a blue-yellow color and be between 1- 2 inches high.

To check the ame, view the ame through the holes in both sides of the rebox.

Hole for viewing the ame

CARE AND MAINTENANCE

Burner Assembly

Removing The Burner Assembly

1. Make sure all control knobs are in the OFF position, gas supply valve is closed, and the gas hose is disconnected from the gas supply.

2. Open lid and remove warming rack, cooking grates, and heat tents.

3. Remove hinge pin as illustrated in Figure 1.

4. Slide main burners out of rebox.

5. Detach ignition wire from electrode in Figure 2.

Warming Rack

Cooking Grates

Heat Tents

Figure 1

Figure 2

CARE AND MAINTENANCE

Cleaning the Burner Assembly

– Make sure the grill is cool

1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.

2. Ensure burner is free of any damage. If damage is found, replace with new burner.

3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.

Re-installing the Burner

Ensure that gas valve orices are correctly positioned inside burner inlet (venturi). The use of a ashlight may be necessary to ensure the correct position. It is recommended to view the correct position through the rebox vent holes as illustrated below.

Reattach each burner with the hinge pin and reattach the ignition wire to electrode.

Incorrect Incorrect Correct

Bottom View

View the correct position

from the bottom of the rebox

WARNING

If the instructions above are not followed, a re or explosion may result, possibly causing serious bodily injury or death.

Other Care and Maintenance

It is recommended that inspection and service on this appliance be conducted annually by a qualied

service person.

It is recommended that you always check that the outdoor cooking appliance area is clear and free

from combustible material, gasoline and other ammable vapors and liquids before lighting.

It is recommended that you regularly check that the ow of combustion and ventilation air is not

obstructed.

It is recommended that you regularly check that the ventilation openings of the grill cabinet are free and clear from debris.

It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect

nests. A clogged tube can lead to a re beneath the grill.

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light using the ignitor procedure (weak or no spark being generated).

Low Heat.

Excessive Flare Ups.

1. The igniter electrode may be covered with grease or residue.

2. The igniter electrode may have a loose or disconnected wire.

3. Cracked or broken ignition electrode.

1. Insufcient gas pressure to

the unit.

1. Grease and/or residue build-up on heat tents or in

rebox.

2. Excessive dripping of fat or marinade from food.

3. Cooking temperature too high.

1. Clean the ignitor electrode.

2. Check the connection and reconnect any loose or disconnected wires.

3. Replace ignition electrode (see Replacement Parts List).

1. Call a qualied service agency to check

the gas supply pressure and correct the pressure.

1. Clean the grill components.

2. Trim the fat from meat and use non-oil based marinades.

3. Lower temperature accordingly.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light with a match.

1. Match not reaching burners (when holding match with

hand).

2. Empty tank.

3. Poor connection between valve regulator and LP cylinder coupling.

4. Burner inlet blocked.

1. Tank valve not on or fully opened.

2. Empty tank.

3. Poor connection between valve regulator and LP

cylinder coupling.

4. Burner inlet blocked.

1. Use match holder found in cabinet door.

2. Check fuel level and rell tank if necessary.

3. Turn off grill knobs, close the LP

cylinder valve at top of cylinder and check the connection between the regulator valve and cylinder coupling. Disconnect and reconnect, if necessary.

4. Clean the burner inlet (venturi)

and burner as described by the Care and Maintenance section in the manual.

1. Fully open tank valve by turning

counterclockwise.

2. Check fuel level and replace

fuel if necessary.

3. Turn off grill knobs, close the LP

cylinder valve at top of cylinder and check the connection between the regulator valve and cylinder coupling. Disconnect and reconnect, if necessary.

4. Clean the burner inlet (venturi)

and burner as described by the Care and Maintenance section in the manual.

LIMITED WARRANTY

1-Year Limited Warranty

This LP gas grill is warranted for 1 year (5 years on the Stainless Steel burners) against broken or damaged parts at the time of purchase. It is warranted to be free of defects. Paint is warranted to be free of defects except for rust, which may appear after repeated use.

This warranty does not cover damage or issues related to neglect, abuse, or modications to the

appliance. Repair labor is not covered.

All parts that meet the warranty requirements will be shipped at no charge via the discretion of the

manufacturer (ground shipments, US Mail, or Parcel Post ONLY). Any special handling charges (i.e. Second Day, overnight, etc.) will be the responsibility of the consumer.

All warranty claims apply only to the original purchaser and require a proof of purchase verifying purchase date. Do not return parts without rst obtaining a return authorization number from our

customer service. This service is available by calling toll free 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday.

NOTICE: Some states do not allow the exclusion or limitation of incidental or consequential damages

or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not

apply to you. This warranty gives you specic legal rights and you may also have other legal rights

which may vary from state to state.

GHP Group Inc. 6440 W. Howard Street Niles, IL, USA 60714-3302

Item Name: 3 Burner Premier Gas Grill Model #: DGG424CNP/DGG424CNP-D/DGG424RNP/DGG424RNP-D Main burner total rated BTU: 36,000 BTU/Hr

+ 60 hidden pages