Dyna-glo Dgb515sdp-1 Owner's Manual

5-BURNER

LP GAS GRILL

WITH SIDE BURNER

Model #DGB515SDP / DGB515SDP-D

Français p. 31

Français p.

Español p. 61

Español p.

ANS Z21.58-2015

CSA 1.6-2015

Outdoor Cooking

Gas Appliances

ATTACH YOUR RECEIPT HERE

Serial Number _____________________________ Purchase Date ______________________

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or e-mail us at customerservice@ghpgroupinc.com.

70-10-578 Rev. 7/20/16

TABLE OF CONTENTS

Safety Information ...................................................................................................................... 3

Package Contents ...................................................................................................................... 5

Hardware Contents .................................................................................................................... 6

Preparation ................................................................................................................................. 6

Assembly Instructions ................................................................................................................ 7

Operation Instructions ................................................................................................................. 17

Care and Maintenance ................................................................................................................. 22

Troubleshooting ........................................................................................................................... 25

Warranty ...................................................................................................................................... 27

Replacement Parts List .............................................................................................................. 28

Assembler/Installer: This manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Retain these instructions for future reference.

DANGER

If you smell gas:

1. Do not store or use gasoline

WARNING

or other ammable liquids or

1. Shut off gas to the appliance.

2. Extinguish any open ame.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call your local re department.

vapors in the vicinity of this or any other appliance.

2. An LP (liquid propane) cylinder not connected for use shall

not be stored in the vicinity of

this or any other appliance.

3. This grill is for outdoor use

only and shall not be used in a building, garage, under over-

hangs or any other enclosed area.

4. Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at: 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

DANGER

• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible

materials, gasoline and other ammable vapors and liquids.

CALIFORNIA PROPOSITION 65

Fuels used in gas or oil red appliances and the products of combustion of such fuels contain

chemicals, including Benzene, known to the State of California to cause cancer, birth defects or other reproductive harm. This product contains chemicals, including lead and lead compounds, known to the State of California to cause cancer, birth defects or other reproductive harm. Wash

hands after handling.

CAUTION

• Never use charcoal or lighter uid with the grill.

• Do not use gasoline, kerosene or alcohol for lighting.

• The LP gas cylinder used with this appliance must be:

(a) Constructed and marked in accordance with the Specications for LP-Gas Cylinders

of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commision, as applicable; and

(b) Provided with a listed overlling prevention device.

(c) Provided with a cylinder connection device compatible with the connector for outdoor cooking appliances. This grill is not intended to be used in or installed on recreational vehicles and/or boats.

• Never keep a lled container in a hot car or car trunk. Heat will cause the gas pressure to

increase, which may open the relief valve and allow gas to escape.

• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn you severely.

SAFETY INFORMATION

WARNING

• Do not place the grill under overhead combustible construction or awnings. Minimum clearance from sides and back of unit to combustible construction, 36 inches (914.4mm) from sides and back.

NOTE: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

CAUTION

914.4mm

36in

914.4mm

• Do not store or use gasoline or other ammable liquids or vapors in the vicinity of this or any

other appliance.

• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

• This grill is for use with propane gas only (propane cylinder not included).

• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer, motor home or house.

• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked when not moving the grill.

• Do not use the grill unless it is completely assembled and all parts are securely fastened and tightened.

• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all times.

• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).

• Do not alter this grill in any manner.

• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced prior to operating the appliance. The replacement hose

assembly will be that which is specied by the manufacturer.

• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.

• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the

grill before each use. Do not obstruct the ow of gas or ventilation air.

• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to properly assemble or safely operate the grill.

• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

• Do not place this grill on any type of tabletop surface. The grill should be placed on a at and

level surface.

• Do not use the grill in high winds.

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Hood Handle 1 B Temp Gauge 1 C Grill Body Assembly 1 D Control Knob 6 E Grease Pan 1 F Grease Cup 1 G Warming Rack 1 H Cooking Grate 3 I Heat Tent 5 J Left Side Table Assembly 1 K Side Burner Rack 1 L Side Burner 1 M Right Side Burner Body 1 N Control Knob Bezel 1

PART DESCRIPTION QUANTITY

O Left Leg Assembly 1 P Leg End Cap 2 Q Cylinder Block Bar 1 R Cart Rear Support 1 S Bottom Shelf’s Rear Bracket Assembly 1 T Cart Front Panel - Upper 1 U Cart Front Panel - Lower 1 V

Right Leg Assembly

1 W Bottom Shelf 1 X Axle 1 Y Wheel 2 Z Bottom Shelf’s Front Bracket Assembly 1

HARDWARE CONTENTS

ST4.8x10

Screw

Qty. 2

Spring

Washer

Qty. 2

M10

Nut

Qty. 2

Washer

Qty. 2

M4x10

Bolt

Qty. 2

M10-M6

Wrench

Qty. 2

M6x16

Bolt

Qty. 34

M5x12

Bolt

Qty. 2

Wingnut

Qty. 2

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 50 minutes with 2 people.

Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle,

Plier, Adjustable Wrench

CAUTION

THIS UNIT IS HEAVY. Two people required for safe assembly.

Two people required for safe assembly. Some parts may contain sharp edges. Wear protective gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use.

ASSEMBLY INSTRUCTIONS

1. Put two leg end caps (P) under left leg assembly (O), and fasten them with two ST4.8X10 screws (AA).

Hardware Used

ST4.8x10 Screw

x 2

2. Slide the axle (X) through the right leg assembly (V) and then put the wheels (Y) on both sides, and tighten the wheels with M10 nuts (BB) with wrenches (CC). Please note, this step requires two people to complete, and if necessary any other plier or adjustable wrench can be used for assembly.

Hardware Used

M10 Nut

M10-M6

Wrench

x 2

ASSEMBLY INSTRUCTIONS

3. Use eight M6x16 bolts (DD) to assemble cart front panel - upper (T) and cart front panel lower (U) between left leg assembly (O) and right leg assembly (V). Please note the front panel - lower’s (U) direction, the side with rivet nut in the middle should be downward.

Hardware Used

M6x16 Bolt

x 8

4. Use four M6X16 bolts (DD) to fasten the bottom shelf’s front bracket assembly (Z), bottom shelf’s rear bracket assembly (S) and bottom shelf (W).

Hardware Used

M6x16 Bolt

x 4

ASSEMBLY INSTRUCTIONS

5. Assemble bottom shelf assembly to the left leg assembly (O) and right leg assembly (V) with four M6X16 bolts (DD).

Hardware Used

M6x16 Bolt

x 4

6. Use four M6x16 bolts (DD) to fasten the cart rear support (R) to the left and right leg assembly. Please note the cart rear support’s (R) direction, the side with the rivet nut in the middle should be upward. Then use two M5x12 bolts (EE) to fasten the cylinder block bar (Q) between the cart front panel - lower (U) and the cart rear support (R).

Bottom Shelf

Assembly

Hardware Used

M6x16 Bolt

M5x12 Bolt

x 4

x 2

ASSEMBLY INSTRUCTIONS

7. Assemble the hood handle (A) to the hood with two wingnuts (FF) and two spring washers (GG) and two M6 washers (HH).

Hardware Used

M6 Wingnut

M6 Spring Washer

M6 Washer

x 2

8. Assemble the temp gauge (B) onto the hood. Please use the washer and wing nut pre-assembled with temp gauge to install the temp gauge (B) onto the hood.

ASSEMBLY INSTRUCTIONS

9. Assemble the grill body assembly (C) onto the cart assembly with four M6x16 bolts (DD).

Hardware Used

M6x16 Bolt

x 4

10. Pre-assemble two M6x16 bolts (DD) onto the grill body assembly (C) and do not tighten them and make sure to leave a 5mm gap between the bolt and grill body’s end cap. Then hang the left side table assembly (J) on the bolts and fasten the left side table assembly (J) with three M6x16 bolts (DD) and tighten all bolts.

Hardware Used

M6x16 Bolt

5mm

x 5

ASSEMBLY INSTRUCTIONS

11. Pre-assemble two M6x16 bolts (DD) onto the grill body assembly (C) and do not tighten them and make sure to leave a 5mm gap between the bolt and grill body’s end cap. Then hang the right side burner body (M) on the bolts and fasten the right side burner body (M) with three M6x16 bolts (DD) and tighten all bolts.

Hardware Used

M6x16 Bolt

x 5

5mm

12. Use two M4x10 bolts (II) to assemble the side burner valve assembly and control knob bezel (N) to the right side burner body (M).

Hardware Used

M4x10 Bolt

x 2

ASSEMBLY INSTRUCTIONS

13. Disassemble two M4x10 bolts that are pre assembled on the side burner (L) and use them to assemble the side burner (L) on the right side burner body (M).

Please ensure the gas valve orice is correctly

positioned inside side burner inlet (venturi).

Correct

Incorrect

14. Connect the side burner sparker wire to the side burner sparker.

WARNING: IT IS VERY IMPORTANT TO CHECK AND ENSURE THAT EACH AND EVERY BURNER IS FULLY ENGAGED WITH THE ADJACENT VALVE ORIFICE BEFORE COMPLETING STEP 15. FAILURE TO DO SO MAY RESULT IN FIRE OR EXPLOSION, POSSIBLY CAUSING SERIOUS INJURY OR DEATH. REFER TO MAINTENANCE SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.

2 Bolts previously disassembled

Wrong

Correct

ASSEMBLY INSTRUCTIONS

15. Put the side burner rack (K) in place.

16. Assemble the six control knobs (D).

ASSEMBLY INSTRUCTIONS

17. Put the ve heat tents (I) into place over

each burner.

18. Put three cooking grates (H) and one warming rack (G) in place.

ASSEMBLY INSTRUCTIONS

19. Place grease pan (E) and grease cup (F) in place.

20. Place gas cylinder (sold separately) into the nesting hole located in the Bottom shelf (W). Rotate the gas cylinder until the hose/regulator coupling aligns with the threaded valve of the cylinder. Hand-tighten the hose/regulator coupling to the threaded valve of the LP gas cylinder.

Tighten the tank screw clockwise in the bottom shelf (W) until the cylinder is secured in place inside the nesting hole of the Bottom shelf (W).

Front View

Rear View

Gas

Cylinder

Tank

Screw

OPERATION INSTRUCTIONS

CHECKING FOR LEAKS

After all connections are made, check all connections and ttings on the LP gas tank valve, gas hose

and regulator for leaks with a water and soap solution.

To prevent re or explosion while testing for a leak:

• Always perform leak test prior to lighting the grill.

• Do not smoke while testing for a leak.

• Always perform leak tests outdoors in a well-ventilated area.

• Do not use any source of ame while testing for leaks.

• Do not use the grill until any and all leaks are corrected.

• If you are unable to correct a leak, disconnect the propane supply and call a gas appliance service dealer.

PERFORM LEAK TEST

• Prepare leak test solution by 50/50 ratio of liquid dish soap and water. Total solution required is approximately 2 - 3 ounces (70 - 90 ml). Put leak test solution in a spray bottle.

• Ensure all control knobs are in the O OFF position.

• Connect the gas hose to the gas supply.

• Open the LP gas tank valve.

• Spray leak test solution on all gas carrying connections and ttings. Presence of bubbles at areas

of applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off the gas supply valve immediately and repair or replace the defective part. Do not use the grill until all leaks are corrected.

CAUTION

Only use the regulator and hose assembly provided! If a replacement is necessary, please call our customer service center. Do not use replacement parts that are not intended for this grill.

WARNING

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

OPERATION INSTRUCTIONS

CONNECTING GAS CYLINDER

The propane gas supply cylinder to be used must be constructed and marked in accordance with the

Specications for LP Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National

Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous

Goods; and Commission, as applicable; and provided with a listed overlling prevention device.

Use only 20-pound cylinders (height: 18.11 inches, tank diameter: 9.84 inches, foot diameter: 8.03 inches) equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances.

The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or handled roughly!

If the appliance is not in use, the gas cylinder must be disconnected. Storage of an appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area. Your cylinder must never be stored where temperatures can reach over 125°F.

Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

Before connection, be sure that there is no debris caught in the outlet of the gas cylinder, outlet of the regulator valve or in the outlet of the burner and burner ports. Connect regulator valve and

hand-tighten rmly. Keep the propane cylinder valve closed and disconnect the propane cylinder from

the regulator valve when the grill is not in use.

DO NOT obstruct the ow of combustion air and ventilation air to the grill. The propane cylinder must be arranged for vapor withdrawal and equipped with a listed overlling prevention device. Please use

the proper cylinder orientation to provide vapor withdrawal. NOTE: The cylinder must be fully upright for the cylinder to have vapor withdrawal only.

CAUTION

a. Do not store a spare LP-gas cylinder under or near this appliance.

b. Never ll the cylinder beyond 80 percent full. c. If the information in (a) and (b) is not followed exactly, a re causing death or serious

injury may occur.

OPERATION INSTRUCTIONS

NOTE: Other cylinders may be acceptable for use with this appliance provided they are compatible

with the appliance nesting hole and retention means. Refer to Step 20 of the Assembly Instructions for correct cylinder to cylinder holder connection.

WARNING

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

CONNECTING THE LP TANK

1. The knob on the LP tank must be closed. Make sure that the knob is turned clockwise to a full stop. The cylinder supply system must be arranged for vapor withdrawal.

2. Check that the control knob on the control unit is turned off.

3. Remove the protective cap from the LP tank valve and coupling nut.

4. Hold the regulator in one hand and insert the nipple into the valve outlet. Be sure the nipple is centered in the valve outlet. The coupling nut connects to the large outside threads on the valve outlet. Use care – do not cross thread the connection.

5. Hand-tighten the coupling nut clockwise until it comes to a full stop. Firmly tighten by hand only. Do not use tools. To Disconnect: Fully close the tank valve by turning clockwise. Turn the coupling nut counterclockwise until the regulator assembly detaches.

WARNING

In the connection process, make sure:

• the regulator inlet connector mates with the cylinder valve outlet properly, safely and rmly, and;

• the LP gas hose does not come in contact or remain in contact with the rebox.

OPERATION INSTRUCTIONS

Lighting The Grill

Before rst use:

Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed and the control knob in the highest position. This will clean the internal parts by burning off any residue and odor from the manufacturing process.

CAUTION

If the ame extinguishes accidentally during ignition or operation, immediately TURN OFF the cylinder valve and then TURN OFF the control knob.

WARNING

Do not lean over grill when lighting. Read instructions before lighting.

1. Check that the control knobs are in the O OFF position.

2. Open valve at tank fully by turning counterclockwise.

3. Open lid during lighting.

4. Depress and turn control knob counterclockwise from off position, past the ignite position, to the high position. You may need to repeat several times to ignite the burner.

If ignition does not occur in 5 seconds, turn the control(s) off, O wait 5 minutes, and repeat the lighting procedure.

If the burner still does not light, check that there is gas in the cylinder and follow the match lighting instructions. Check the Troubleshooting Guide on page 25 for more information.

OPERATION INSTRUCTIONS

LIGHTING THE GRILL WITH A MATCH

1. Open the lid.

2. Insert a match in the end of the match holder that is installed on the right leg assembly.

3. Light the match.

4. Immediately place the lit match through the spaces in the grill gates near the ports of the burner between the heat tents as shown. Make sure the lit match is close to the burner ports.

5. Press in the control knob that operates the burner and rotate counter-clockwise to High position and burner should light immediately.

6. Repeat 2~5 steps to lighting the remaining burners.

7. Adjust burners to desired cooking settings.

CAUTION

Make sure all burners controls are off except for the burner being lit and the burners that have been lit.

Main Burner Match Lighting

SHUTDOWN INSTRUCTIONS

Side Burner Match Lighting

1. Turn control knobs clockwise to the O OFF position.

2. Close valve at tank fully by turning clockwise.

3. Close lid.

Turn off LP supply at cylinder when appliance is not in use.

CARE AND MAINTENANCE

Cooking Grates

The best time to ‘burn-off’ the cooking grates is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for ‘burn-off’.

To ‘burn off’ or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.

The porcelain grates have an enamel nish (similar to glass) and should be handled with care

not to chip.

CAUTION

Ensure the grill is cool before cleaning and conducting maintenance and with the gas supply

turned off at the LP-Gas Cylinder.

Recommended Cleaning Supplies

Mild liquid dish soap, warm water, nylon cleaning pad, wire brush DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.

Outside Surfaces

It is recommended to use only mild dish soap and hot water to clean grill and grill parts. Rinse with warm water.

Inside Bottom Pan of Grill Body

To avoid are-ups, the bottom pan of the cooking box should be kept clean on a regular basis.

Remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and warm water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.

Heat Tents

Clean residue with wire brush and wash with mild dish soap and warm water. Rinse with warm water.

Grease Cup

Empty the grease cup and clean with mild dish soap and warm water on a regular basis.

Checking The Flame

For maximum fuel efciency and cooking performance, ame

should be a blue-yellow color and be between 1- 2 inches high.

To check the ame, view the ame through the holes in both sides of the rebox.

Hole for viewing the ame

CARE AND MAINTENANCE

Burner Assembly

Removing The Burner Assembly

1. Make sure all control knobs are in the OFF position, gas supply valve is closed, and the gas hose is disconnected from the gas supply.

2. Open lid and remove warming rack, cooking grates, heat tents, clip for burner, ignition chain and main burner.

3. Remove hinge pin as illustrated in Figure 1.

4. Slide main burmers out of rebox.

5. Detach ignition wire from electrode in Figure 2.

Warming Rack

Cooking Grates

Heat Tents

Figure 1

Figure 2

CARE AND MAINTENANCE

Cleaning the Burner Assembly

– Make sure the grill is cool

1.Turn gas off at the control knobs and LP gas cylinder.

2.Disconnect LP gas cylinder from regulator and hose.

3.Remove warming rack, cooking grates and heat tents.

4.Detach burner by removing the cotter pins at the back of the burners to detach them from the brackets.

5.Detach ignition wire from electrode by hand only. DO NOT use pliers or any other tool as it may damage the electrode or wire.

6.Lift burner slowly.

7.Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.

8.Ensure burner is free of any damage. If damage is found, replace with new burner.

9.Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.

Re-installing the Burner

Ensure that gas valve orices are correctly positioned inside burner inlet (venturi). The use of a ashlight may be necessary to ensure the correct position. It is recommended to view the correct position through the rebox vent holes as illustrated below.

Reattach each burner with the hinge pin and reattach the ignition wire to electrode.

View the correct position

from the bottom of the rebox

Bottom View

Wrong

Correct

WARNING

If the instructions above are not followed, a re or explosion may result, possibly causing serious bodily injury or death.

Other Care and Maintenance

It is recommended that inspection and service on this appliance be conducted annually by a qualied

service person.

It is recommended that you always check that the outdoor cooking appliance area is clear and free

from combustible material, gasoline and other ammable vapors and liquids before lighting.

It is recommended that you regularly check that the ow of combustion and ventilation air is not

obstructed.

It is recommended that you regularly check that the ventilation openings of the grill cabinet are free and clear from debris.

It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect

nests. A clogged tube can lead to a re beneath the grill.

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light using the ignitor procedure (weak or no spark being generated).

Low Heat.

Excessive Flare Ups.

1. The igniter electrode may be covered with grease or residue.

2. The igniter electrode may have a loose or disconnected wire.

3. Cracked or broken ignition

electrode.

1. Insucient gas pressure to the unit.

1. Grease and/or residue

build-up on heat tents or in

rebox.

2. Excessive dripping of fat or

marinade from food.

3. Cooking temperature too high.

1. Clean the ignitor electrode.

2. Check the connection and reconnect any loose or disconnected wires.

3. Replace ignition electrode (see Replacement Parts List).

1. Call a qualied service agency to check the gas supply pressure and correct the

pressure.

1. Clean the grill components.

2. Trim the fat from meat and use non-oil based marinades.

3. Lower temperature accordingly.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light with a match.

No gas ow or an obstructed gas ow.

1. Match not reaching burners (when holding match with

hand).

2. Empty tank.

3. Poor connection between valve regulator and LP

cylinder coupling.

4. Burner inlet blocked.

1. Tank valve not on or fully opened.

2. Empty tank.

3. Poor connection between valve regulator and LP

cylinder coupling.

4. Burner inlet blocked.

1. Use match holder found in cabinet door.

2. Check fuel level and rell tank if necessary.

3. Turn o grill knobs, close the LP cylinder valve at top of cylinder and check the connection between the regulator valve and cylinder coupling. Disconnect and reconnect, if necessary.

4. Clean the burner inlet (venturi) and burner as described by the Care and Maintenance section in the manual.

1. Fully open tank valve by turning counterclockwise.

2. Check fuel level and replace fuel if necessary.

3. Turn o grill knobs, close the LP cylinder valve at top of cylinder and check the connection between the regulator valve and cylinder coupling. Disconnect and reconnect, if necessary.

4. Clean the burner inlet (venturi) and burner as described by the Care and Maintenance section in the manual.

LIMITED WARRANTY

1-Year Limited Warranty

This LP gas grill is warranted for 1 year (5 years on the Stainless Steel burners) against broken or damaged parts at the time of purchase. It is warranted to be free of defects. Paint is warranted to be free of defects except for rust, which may appear after repeated use.

This warranty does not cover damage or issues related to neglect, abuse, or modications to the

appliance. Repair labor is not covered.

All parts that meet the warranty requirements will be shipped at no charge via the discretion of the manufacturer (ground shipments, US Mail, or Parcel Post ONLY). Any special handling charges (i.e. Second Day, overnight, etc.) will be the responsibility of the consumer.

All warranty claims apply only to the original purchaser and require a proof of purchase verifying

purchase date. Do not return parts without rst obtaining a return authorization number from our

customer service. This service is available by calling toll free 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

NOTICE: Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not

apply to you. This warranty gives you specic legal rights and you may also have other legal rights

which may vary from state to state.

GHP Group Inc. 6440 W. Howard Street Niles, IL, USA 60714-3302

Item Name: 5-Burner LP Gas Grill With Side Burner Model #: DGB515SDP / DGB515SDP-D Main Burner Total rated BTU: 60,000 BTU/Hr Side Burner rated BTU: 12,000 BTU/Hr

+ 63 hidden pages

Dyna-glo Dgb515sdp-1 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual