Dyna-glo Dga480ssn-1 Owner's Manual

4-BURNER NATURAL GAS

GRILL WITH SIDE BURNER

MODEL #DGA480SSN/DGA480SSN-D

Français p. XX

Français p. 25

Español p. XX

Español p. 49

ANS Z21.58b-2012

CSA 1.6b-2012

Outdoor Cooking

Gas Appliance

ATTACH YOUR RECEIPT HERE

Serial Number

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or e-mail us at customerservice@ghpgroupinc.com.

Purchase Date

70-10-058

Rev. 02/19/14

TABLE OF CONTENTS

Safety Information ......................................................................................................................... 3

Package Contents ......................................................................................................................... 5

Hardware Contents ....................................................................................................................... 6

Preparation ................................................................................................................................... 6

Assembly Instructions ................................................................................................................... 7

Operating Instructions ................................................................................................................... 15

Care and Maintenance .................................................................................................................. 16

Troubleshooting ............................................................................................................................ 19

Warranty ....................................................................................................................................... 21

Replacement Parts List ................................................................................................................ 22

Assembler/Installer: This manual contains important information necessary for the proper

assembly and safe use of this appliance. Read and follow all warnings and instructions before

assembling and using this appliance. Leave these instructions with the consumer.

Consumer/User: Follow all warnings and instructions when using this appliance.

Retain these instructions for future reference.

DANGER:

If you smell gas:

1. Shut off gas to the appliance.

3. Open lid.

4. If odor continues, keep away from the appliance and immediately call your

1. Do not store or use gasoline or other of this or any other appliance.

2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

3. This grill is for outdoor use only and shall not be used in a building, garage, under overhangs or any other enclosed area.

4. Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

WARNING:

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at:

1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

DANGER

• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible

materials, gasoline and other flammable vapors and liquids.

CALIFORNIA PROPOSITION 65

Fuels used in gas or oil fired appliances and the products of combustion of such fuels contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. This product contains chemicals, including lead and lead compounds, known to the State of California to cause cancer, birth defects or other reproductive harm. W ash hands after handling.

CAUTION

• Never use charcoal or lighter fluid with the grill.

• Do not use gasoline, kerosene or alcohol for lighting.

• This grill is not intended to be used in or installed on recreational vehicles and/or boats.

• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn

you severely.

• Never attempt to operate this grill using propane.

• Always employ a qualified service agency to install all necessary natural gas supply

plumbing, manual shutoff valve, and quick-connect fittings.

SAFETY INFORMATION

WARNING

• Do not place the grill under overhead combustible construction or awnings. Minimum clearance from sides and back of unit to combustible construction: 36 inches (914.4 mm).

NOTE: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

CAUTION

• Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. Do not store flammables inside the cart of the grill.

• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

• This grill is for use with natural gas only.

• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer, motor home or house.

• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked when not moving the grill.

•

Do not use the grill unless it is completely assembled and all parts are securely fastened and

tightened.

• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all times.

• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).

• Do not alter this grill in any manner.

• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced prior to operating the appliance. The replacement hose assembly will be that which is specified by the manufacturer, listed in the repair parts list in this manual.

• Move gas hoses as far away as possible from hot surfaces and dripping hot grease. Never allow the gas hose to touch heated surfaces.

• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill before each use. Do not obstruct the flow of gas or ventilation air.

• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to properly assemble or safely operate the grill.

• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

• Do not place this grill on any type of tabletop surface. The grill should be placed on a flat and level surface.

• Do not use the grill in high winds. 4

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Bottom Shelf 1 B Locking Caster 2 C Caster 2 D Cart Left Side Panel 1 E Cart Right Side Panel 1 F Cart Rear Panel 1 G Upper Door Brace 1 H Left Door Assembly 1 I Right Door Assembly 1 J Door Handle 2 K Door Handle Sleeve 4 L AA Battery 1 M Main Burner Control Knob (Lg) 4 N

Side Burner Control Knob (Sm)

PART DESCRIPTION QUANTITY

O Grill Body 1 P Left Side Burner Assembly 1 Q Side Burner Cooking Grate 1 R Right Shelf Assembly 1 S Grease Pan 1 T Grease Cup 1 U Lid Handle 1 V Lid Handle Bezel 2 W Warming Rack 1 X Heat Tent 4 Y Cooking Grate 2 Z Natural Gas Hose Holder 2 A1 Quick Disconnect Coupling 1

HARDWARE CONTENTS (shown actual size)

Plain

M6 x 12

Washer

Screw

Qty. 16

Qty. 29

PREPARATION

Spring

Washer

Qty. 16

DD EE

M4 x 10

Screw

Qty. 14

NOTE:

Four screws

preassembled

with bottom shelf

M6 x 20

Screw

Qty. 4

M6 x 16

Screw

Qty. 10

M4 x 10

Screw Qty. 4

NOTE:

GG preassembled

in door handles

M6x25

Screw

Qty. 2

NOTE:

Preassembled

in lid handle

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 50 minutes with 2 people.

Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, spray bottle

CAUTION

THIS UNIT IS HEAVY. TWO PEOPLE REQUIRED FOR SAFE ASSEMBLY.

Two people required for safe assembly. Some parts may contain sharp edges. Wear protective gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use.

ASSEMBLY INSTRUCTIONS

1. Locate the two locking casters (B) and the two standard casters (C). Secure the two locking casters (B) to the rear of the bottom shelf (A) (the area with the bevel) using four screws (AA) inserted through four spring washers (CC), then through four plain washers (BB) and into the threaded holes on the bottom shelf (A). Secure the two standard casters (C) to the front of the bottom shelf (A) using four screws (AA) inserted through four spring washers (CC), then through four plain washers (BB) and into the threaded holes on the bottom shelf (A). Tighten all screws.

Hardware Used

M6 x 12 Screw

x 16

Washer

x 16

Plain

Spring

Washer

x 16

2. Insert 4 screws (AA) halfway into threaded holes in bottom shelf (A). Attach the cart left side panel (D) by placing the panel keyholes over the screw heads (AA) on left side of bottom shelf (A). Slide the cart left side panel (D) so that the screw head is over the smaller part of the keyhole. Thread the screw (AA) down snug but do not tighten as some slack will be necessary in following assembly steps. Repeat with cart right side panel (E).

Hardware Used

M6 x 12 Screw

x 4

ASSEMBLY INSTRUCTIONS

3. Insert one screw (AA) halfway into the middle rear threaded hole on both the cart left side panel (D) and cart right side panel (E). Attach the cart rear panel (F) by sliding the keyholes in the cart rear panel (F) over the inserted screws. Slide the cart rear panel (F) down to meet bottom shelf (A). Secure the cart rear panel (F) to the bottom shelf (A) with 3 screws (AA). Tighten all screws, including the 2 screws in cart side panels (D and E).

Hardware Used

M6 x 12 Screw

x 5

4. Insert 2 screws (AA) halfway into the top front threaded holes of both the cart left side panel (D) and the cart right side panel (E). Attach the upper door brace (G) by sliding the cut-outs in the upper door brace (G) over the 4 screws (AA) and tightening all 4 screws (AA).

Hardware Used

M6 x 12 Screw

x 4

ASSEMBLY INSTRUCTIONS

5. Remove preassembled screws (GG) from the door handles (J). Insert 2 door handle sleeves (K) into the holes located on the back of the left door assembly (H). Insert 2 screws (GG) into the door handle sleeves (K) and into the threaded holes in the door handle (J). Tighten the screws. Repeat with right door assembly (I).

Hardware Used

M4 x 10 Screw (preassembled)

x 4

6. Attach the left door assembly (H) to the cart body by aligning the holes in the hinge of the left door assembly (H) with the holes in the cart left side panel (D), inserting 4 screws (DD) and tightening. Repeat with right door assembly (I).

Hardware Used

M4 x 10 Screw

x 8

ASSEMBLY INSTRUCTIONS

7. Slip main burner control knobs (M) and side burner control knob (N) onto the valve stems located on the front control panel of the grill body (O). Remove preassembled screws (HH) from the lid handle (U). Attach the lid handle (U) by inserting two screws (HH) from inside the lid of the grill body (O), through the lid handle bezels (V), into the handle (U) and tightening securely.

Hardware Used

M6 x 25 Screw

x 2

8. Lock the back two casters to ensure the cart doesn’t move. Carefully place the grill body (O) over the mounting tabs on the cart side panels (D and E) and onto the cart. Adjust the grill body (O) so that the holes in the grill body (O) are aligned with the holes in the tabs of the cart side panels (D and E). NOTE: Make sure the natural gas hose drops inside the cart and exits through the opening in the cart rear panel (F). Secure the grill body (O) using 2 screws (EE) on each side. Install the natural gas hose holders (Z) by removing the screws (DD) from the predrilled holes in the the bottom shelf (A), aligning the natural gas hose holders (Z) with the predrilled holes and over the natural gas hose, then securing with the screws (DD).

Hardware Used

M6 x 20 Screw

x 4

Natural gas

tube opening

M4 x 10 Screw (preassembled)

x 4

ASSEMBLY INSTRUCTIONS

9. Attach two screws (FF) to the grill body (O) as illustrated. Do not fully tighten screws (leave approximately 5 mm). Align the key holes in the left side burner assembly (P) with the two screws (FF) just installed in the grill body (O) and tighten screws. Insert three screws (FF) in the remaining holes in the supports and tighten. Align the side burner tubing with the side burner orifice and insert into the side burner orifice. Use 2 screws (DD) to secure the side burner orifice and side burner orifice support to the side burner support. Attach the ignition wiring to the electrode. Align the key holes on the burner tray with the side burner cooking grate (Q) and set in place.

Hardware Used

M4 x 10 Screw

M6 x 16 Screw

x 2

x 5

10. Install two screws (FF) on the grill body (O). Do

not fully tighten. (Leave approximately 5 mm). Align the key holes in the right shelf assembly (R)

with the two screws (FF) just installed in the grill body (O) and tighten screws. Insert three screws (FF) in the remaining holes in the supports and tighten.

Electrode

Ignition wiring

Hardware Used

M6 x 16 Screw

x 5

ASSEMBLY INSTRUCTIONS

WARNING: IT IS VER Y IMPORTANT TO CHECK

AND ENSURE THAT EACH AND EVERY BURNER IS FULL Y ENGAGED WITH THE ADJACENT VALVE ORIFICE BEFORE COMPLETING STEP 11. FAILURE TO DO SO MAY RESULT IN FIRE OR EXPLOSION, POSSIBLY CAUSING SERIOUS

VALVE ORIFICE

INJURY OR DEATH. REFER TO MAINTENANCE SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.

11. Open the lid and place the four heat tents (X) on the brackets directly above the burners.

12. Place cooking grates (Y) on the grill body braces and grill rear panel, then insert the warming rack (W) into the 2 holes located on the back edge of the grill body (O).

13.

Insert the grease pan (S) into position by

sliding it in the grill body (O) from the rear

along the rails located just below the underside of the grill body (O). Insert the grease cup (T) into position by sliding it onto the rails located on the bottom side of the grease pan (S).

ASSEMBLY INSTRUCTIONS

14.

Remove the igniter cap by turning it counter clockwise. Insert the AA battery (L) into the igniter body with Positive (+) end facing out. Replace the igniter cap.

CONNECTING THE GRILL TO THE NATURAL GAS SUPPLY

• The quick disconnect socket (A1) and supply gas line must be installed by a qualified service agency. The supply connection must be made in accordance with local codes or , in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, in the USA, or the Natural Gas and Propane Installation Code, CSA B149.1, in Canada.

• A properly sized manual shutoff valve must be installed between the grill and the gas supply piping.

• The grill and its individual shutoff valve must be disconnected from the gas supply piping system

during any pressure testing of that system at test pressures in excess of 0.5 PSI (3.5 kPa).

• The grill must be isolated from the gas supply piping system by closing its individual manual shutoff

valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 0.5 PSI (3.5 kPa).

• Always connect the flexible gas supply hose to the gas supply before opening the manual shutoff valve.

TO CONNECT:

1. Ensure that the manual gas shutoff valve is closed.

2. Remove the protective rubber caps from the plug and sleeve ends of the quick disconnect fittings. Check that the fittings are clean.

3. Retract the sleeve on the coupling as illustrated.

4. Insert the plug and release the sleeve as illustrated.

5. Push the plug into the sleeve until the sleeve snaps forward to lock the plug in the coupling.

6. Open the manual gas shutoff valve.

TO DISCONNECT

1. Close the manual shutoff valve.

2. Push the sleeve back and gently pull out the plug.

3. Replace the protective rubber caps on the plug and sleeve ends of the quick disconnect couplings.

ASSEMBLY INSTRUCTIONS

WARNING

In the connection process, make sure:

• The gas supply hose does not come in contact or remain in contact with the firebox.

CHECKING FOR LEAKS

After all connections are made, check all connections and fittings on the natural gas quick connector, gas hose and manifold for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak:

• Always perform leak test prior to lighting the grill.

• Do not smoke while testing for a leak.

• Always perform leak tests outdoors in a well-ventilated area.

• Do not use any source of flame while testing for leaks.

• Do not use the grill until any and all leaks are corrected.

• If you are unable to correct a leak, close the manual gas shutoff valve and call a gas appliance

service agency.

PERFORM LEAK TEST

• Prepare leak test solution by combining 1 part liquid dish soap with 3 parts water.

Total solution required is approximately 2 - 3 ounces (70 - 90 ml). Put leak test solution in a spray bottle.

• Ensure all control knobs are in the ‘OFF’ position.

• Connect the gas hose to the gas supply.

• Open the gas shutoff valve.

• Spray leak test solution on all gas carrying connections and fittings. Presence of bubbles at areas

of applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off the gas supply valve immediately and repair or replace the defective part. Do not use the grill until all leaks are corrected.

CAUTION

Only use the hose assembly provided! If a replacement is necessary, please call our customer service center. Do not use replacement parts that are not intended for this grill.

WARNING

ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

OPERATING INSTRUCTIONS

LIGHTING THE GRILL Before first use:

Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed and the control knob in the highest position. This will clean the internal parts by burning off any residue and odor from the manufacturing process.

CAUTION

If the flame extinguishes accidentally during ignition or operation, immediately TURN OFF

the manual gas shutoff valve and then TURN OFF the control knob.

WARNING

Do not lean over grill when lighting. Read instructions before lighting.

1. Check that the control knobs are in the OFF position.

2. Open natural gas shutoff valve.

3. Open lid during lighting.

4. Push igniter down 3 to 4 seconds while turning right side control knob to the HIGH position. The burner should ignite. If ignition does not take place within 5 seconds, immediately turn the control knob to the OFF position. Wait 5 minutes and repeat Step 4 above or refer to match lighting instructions below.

5. Repeat Step 4 above to ignite left side burner. If the burner still does not light, check that the manual gas shutoff valve is open and follow the match

lighting instructions.

LIGHTING THE GRILL WITH A MATCH

1. Insert a match in the end of the match holder that is installed on the inside of the cabinet door.

2. Light the match.

3. Immediately place the lit match through the 0.75 inches (20 mm) hole on the side of the grill body, nearest the left burner. Make sure the lit match is close to the burner ports.

4. Press in the control knob that operates the left burner and rotate counter-clockwise to High position and burner should light immediately.

5. The other main control can now be turned on the High position and will light via crossover port.

6. Adjust burners to desired cooking settings.

SHUTDOWN INSTRUCTIONS

1. Turn control knobs clockwise to the OFF position.

2. Close manual gas shutoff valve.

3. Close lid. Turn off manual gas shutoff valve when appliance is not in use.

CARE AND MAINTENANCE

COOKING GRATES

The best time to burn-off the cooking grates is after every use (approx. 15 minutes). The grill is already hot from cooking thus requiring less fuel to obtain necessary temperature for burn-off.

To burn-off or heat clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.

The porcelain grates have an enamel finish (similar to glass) and should be handled with care not to chip.

CAUTION

Ensure the grill is cool before cleaning and conducting maintenance and with the gas

supply turned off at the manual gas shutoff valve.

RECOMMENDED CLEANING SUPPLIES

Mild liquid dish soap, warm water, nylon cleaning pad, wire brush DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.

OUTSIDE SURFACES

It is recommended to use only mild dish soap and hot water to clean grill and grill parts. Rinse with warm water.

INSIDE BOTTOM PAN OF GRILL BODY

To avoid flare-ups, the bottom pan of the cooking box should be kept clean on a regular basis.

Remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and warm

water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.

HEAT TENTS

Clean residue with wire brush and wash with mild dish soap and warm water. Rinse with warm water.

GREASE CUP

Empty the grease cup and clean with mild dish soap and warm water on a regular basis.

CHECKING THE FLAME

For maximum fuel efficiency and cooking performance, flame should be mostly or all blue in color and be between 1 - 2 inches high. To check the flame, view the flame through the match lighting hole in the side of the firebox.

CARE AND MAINTENANCE

BURNER ASSEMBLY REMOVING THE BURNER ASSEMBLY

1. Make sure all control knobs are in the OFF position, gas supply valve is closed, and the gas hose is disconnected from the gas supply.

2. Open lid and remove warming rack, cooking grates, and heat tents.

3. Remove cotter pins at back of burners to detach burners from brackets.

Warming Rack

Cooking Grates

Heat Tents

Cotter Pin

Burner

4. Slide burners out of firebox as shown.

Burner Bracket

5. Detach ignition wire from ignitor as shown.

CARE AND MAINTENANCE

CLEANING THE BURNER ASSEMBLY

– Make sure the grill is cool

1. Turn gas off at the manual gas supply valve.

2. Disconnect gas supply hose.

3. Remove warming rack, cooking grates and heat tents.

4. Detach burner by removing the cotter pins at the back of the burners to detach them from the brackets.

5. Detach ignition wire from electrode by hand only. DO NOT use pliers or any other tool as it may damage the electrode or wire.

6. Lift burner slowly.

7. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.

8. Ensure burner is free of any damage. If damage is found, replace with new burner.

9. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.

RE-INSTALLING THE BURNER

Ensure that gas valve orifices are correctly positioned inside burner inlet (venturi). The use of a flashlight may be necessary to ensure the correct position. It is recommended to view the correct position through the firebox vent holes as illustrated below.

WARNING

If the instructions above are not followed, a fire or explosion may result, possibly causing serious bodily injury or death.

OTHER CARE AND MAINTENANCE

• It is recommended that inspection and service on this appliance be conducted annually by a qualified service person.

• It is recommended that you regularly check that the outdoor cooking appliance area is clear and free from combustible material, gasoline and other flammable vapors and liquids.

• It is recommended that you regularly check that the flow of combustion and ventilation air is not obstructed.

• It is recommended that you regularly check that the ventilation openings of the grill cabinet are free and clear from debris.

• It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire beneath the grill.

CARE AND MAINTENANCE The electronic ignition requires 1 “AA” alkaline battery, which is included.

WARNING

DO NOT mix old and new batteries. DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel-Cadmium) batteries. DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.

TROUBLESHOOTING

If you have any questions regarding the product, please call customer service at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light using the ignitor procedure (weak or no spark being generated).

Excessive flare-ups.

1. The igniter electrode may be covered with grease or residue.

2. The igniter electrode may have a loose or disconnected wire.

3. Cracked or broken ignition electrode.

4. Dead battery or faulty battery connection.

1. Grease and/or residue build-up

on heat tents or in firebox.

1. Clean the ignitor electrode.

2. Check the connection and reconnect any loose or disconnected wires.

3. Replace ignition electrode (see Replacement Parts List).

4. Perform any of the following: a. Replace battery. b. Check to see if battery is

inserted correctly.

c. Check for any corrosion

around battery terminals.

d. Check wire connections as

stated above.

1. Clean the grill components.

2. Excessive dripping of fat or marinade from food.

3. Cooking temperature too high.

2. Trim the fat from meat and use non-oil based marinades.

3. Lower temperature accordingly.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION

The burner will not light with a match.

No gas flow or an obstructed gas flow.

1. Match not reaching burners (when holding match with hand).

2. Gas supply shut off.

3. Poor connection between gas hose plug fitting and sleeve coupling.

4. Burner inlet blocked.

1. Gas supply shut off.

2. Poor connection between gas hose plug fitting and sleeve coupling.

3. Burner inlet blocked.

1. Use match holder found in

cabinet door.

2. Check that the manual gas

supply shutoff valve is open.

3. Turn of f the grill knobs, close the

gas supply shutoff valve and check the connection between the plug and sleeve coupling. Disconnect and reconnect, if necessary.

4. Clean the burner inlet (venturi)

and burner as described by the Care and Maintenance section in the manual.

1. Check that the manual gas supply shutoff valve is open.

2. Turn of f the grill knobs, close the gas supply shutoff valve and check the connection between the plug and sleeve coupling. Disconnect and reconnect, if necessary.

3. Clean the burner inlet (venturi) and burner as described by the Care and Maintenance section in the manual.

Low heat.

1. Insufficient gas pressure to the unit.

1. Call a qualified service agency to check the gas supply pressure and correct the pressure.

LIMITED WARRANTY

1-Year Limited Warranty

This natural gas grill is warranted for 1 year (5 years on the Stainless Steel burners) against broken or damaged parts at the time of purchase. It is warranted to be free of defects. Paint is warranted to be free of defects except for rust, which may appear after repeated use.

This warranty does not cover damage or issues related to neglect, abuse, or modifications to the appliance. Repair labor is not covered.

All parts that meet the warranty requirements will be shipped at no charge via the discretion of the manufacturer (ground shipments, US Mail, or Parcel Post ONLY). Any special handling charges (i.e. Second Day, overnight, etc.) will be the responsibility of the consumer.

All warranty claims apply only to the original purchaser and require a proof of purchase verifying purchase date. Do not return parts without first obtaining a return authorization number from our customer service. This service is available by calling toll free at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST,

Monday – Friday.

NOTICE: Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which may vary from state to state.

GHP Group, Inc. 6440 W. Howard St. Niles, IL, USA 60714-3302

Item Name: 4-Burner Natural Gas Grill with Side Burner Model #: DGA480SSN/DGA480SSN-D Rated BTU: 60,000 BTU/Hr

REPLACEMENT PARTS LIST

36 Complete Sub-assembly

+ 50 hidden pages