Dynacord TS200 User manual

Dynacord | TS 200 Series
TS 200 Series
www.dynacord.com
High power multi-functional 2-way cabinet
300 Watts / 8 Ω
Rotatable CAD optimized 90 x 40 CD horn
The TS 200 is an extremely compact, two-way high­performance loudspeaker, with a nominal power handling capacity of 300 W RMS, suitable for a multitude of highly demanding tasks. Its high SPL and precisely controlled coverage pattern make it a prime candidate for tasks far more challenging than any you would associate with a speaker of its size. Whether used as a full range fill or delay with larger systems or deployed in mobile applications as a medium-sized FOH system in combination with passive or active (e.g. PowerSub 312 or PSD 215) subwoofers, the TS 200 displays outstanding acoustic and mechanical performance. One of the physical benefits of the TS 200 is its weight. At less than 10 kg, it represents a dramatic advance in lightweight engineering in this class. Very high intelligibility even in acoustically problematic rooms, is another of the great strengths of this loudspeaker. With its elegant, slender profile, the TS 200 is especially suitable for situations in which tasteful and discrete styling is called for. All this without compromise in terms of sound quality or pressure level. As well as in a host of mobile applications, the TS 200 features really stand out in the fixed installation market. Ultra-compact cabinets capable of delivering very high sound pressure levels make the challenge for the acoustic & interior designers easier to overcome whenever the
2 x Neodymium DND 6130-16 woofer
appearance of the loudspeakers is of critical or decisive importance to the interior design. In such circumstances the closed cabinet base included in the delivery can be substituted for the one with the top­hat for a mounting pole intended for mobile applications. For the low and medium frequency ranges, two extremely low-distortion DND 6130-16 neodymium chassis in an array configuration are used. The high frequency range is transduced by an Electro­Voice DH-3 into an HPT94 constant directivity horn that can be rotated with ease through 90° for horizontal applications. The integrated crossover is phase-optimized and furthermore, it provides all loudspeakers with electronic protection against thermal overload. The TS 200 is available in either black or white (TS 200W). For fixed installation, the WMK-10 (WMK-10W) wall mounting kit is available. The optional FB-TS400 flying kit facilitates suspension of the device safely from a truss. Another highly practical accessory is the SH-TS200 carrying bag. Linear phase FIR (finite impulse response) factory presets are available as well as presets for conventional digital controllers.
Horn HPT 94
2,5A
1,25A
2µ2
10µ
0µ33
0µ33
0µ33
DND6130-16
DH3
DND 6130-16
B1B2RED
RED
RED
RED
BLACK
BLACK
BLACK
GREY
GREY
YELLOW
24V/70W
24V/70W
24V/70W
24V/70WH2H2H2H2
INPUT
ThruS1S2
L1
C2
C1
C5C4C3L2+IN_X2
-IN_X1
+IN_X1
-IN_X2
HI+.
HI-.
B/LO+.
A/LO+.
A/LO-.
B/LO-.V2V3V4V1
LA1
LA2
LA3
++--1
1
2
2++--
1
1
2
2
20 100 1k 10k 20k
60
65
70
75
80
85
90
95
100
105
110
f / Hz
SPL / dB
Frequency Response, 1/6 Oct.
20 100 1k 10k 20k
1
2
5
10
20
50
100
200
f / Hz
|Z| /
Impedance, 1/6 Oct.
20 100 1k 10k 20k
10
20
30
40
60
80
100
200
360
f / Hz
φ / deg
−6dB Beamwidth, 1/1 Oct.
horizontal vertical
| TS 200 Series
2
Technical specifications
Color
• TS 200 Black (RAL 9005, jet black)
• TS 200W White (RAL 9010, pure white)
Cabinet Full-range
Configuration Passive 2-Way
Nominal impedance 8 Ω
Power handling: Full-range
• Rated power RMS 300 W
• Program power 600 W
• Peak power 1200 W
SPL 1 W/1 m 97 dB
Max. SPL at 1 m (calculated with
128 dB
peak power)
Frequency range (-10 dB) 90–20000 Hz
Nominal coverage angle 90° x 40°
X-Over frequency 2200 Hz
Voice coil tracking protection Halogen
Component HIGH Electro-Voice DH-3
Component LOW 2 x DND 6130-16
Connector
• Model 2 x NEUTRIK speakON NL4
• Contacts full-range 1+, 1-
• Contacts wired through 1+, 1-
Product dimensions (Width x
199 x 513.5 x 239.5 mm
Height x Depth)
Net weight 10 kg
Enclosure material Aluminum
Grille Steel
Suspension 8 x M6
Circuit diagram
Frequency response
Impedance
NEUTRIK and speakON are registered trademarks of Neutrik AG.
Beamwidth
20 100 1k 10k 20k
0
5
10
15
20
25
DI / dB
Directivity Index DI, Directivity Factor Q, 1/1 Oct.
1
2
5
10
20
50
100
200
Q
f / Hz
Horizontal Directivity, 5dB/Div, 50dB Radius, 1/1 Oct.
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
63 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
125 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
250 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
500 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
1 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
2 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
4 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
8 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
16 kHz
Vertical Directivity, 5dB/Div, 50dB Radius, 1/1 Oct.
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
63 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
125 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
250 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
500 Hz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
1 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
2 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
4 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
8 kHz
0°
30°
60°
90°
120°
150°
±180°
−150°
−120°
−90°
−60°
−30°
16 kHz
| TS 200 Series
3
Directivity
Horizontal directivity
Vertical directivity
| TS 200 Series
4
Dimensions
!
!
| TS 200 Series
5
Installation/configuration notes
Warning!
We expressly point out that the relevant safe-
ty regulations must be observed for “flying”
loudspeaker systems. It is imperative that
qualified expert advice is sought.
Warning!
Use of speaker stands
Be sure to observe speaker stands’ maximum
load-bearing capacity. Note that for reasons of
design and construction, most speaker stands
are approved to bear centric loads only; that
is, the speakers’ mass has to be precisely cen-
tered and balanced. Ensure speaker stands
are set up stably and securely. Take appropri-
ate added measures to secure speaker stands,
for example when the floor or ground surface
does not provide a stable, secure base or they
are extended to heights that impede stability
or high wind pressure may be expected or
there is the risk that they may be knocked
over by people or vehicles. Special measures
may become necessary as precautions against
unsafe audience behavior. Do not set up
speaker stands in evacuation routes and
emergency exits. Ensure corridors are wide
enough and put proper barriers and markings
in place when setting speaker stands up in
passageways. Mounting and dismounting are
especially hazardous tasks. Use aids suitable
for this purpose. Always observe the given na-
tional or local regulations when doing so.
Notice!
This loudspeaker system can permanently
damage hearing! Use extreme care when set-
ting sound pressure levels!
Optional accessories
Tilt adaptor (TA-TS400)
Wall mount kit (WMK-10, black version shown)
Notice!
Consult a certified structural engineer before
any attempt to suspend this loudspeaker!
Loudspeaker can fall from improper suspen-
sion, resulting in severe injury and damage of
property. Do not suspend or mount any other
product or device from this loudspeaker en-
closure! Use grade 5 hardware or better only!
6 | TS 200 Series
Flying kit (FB-TS400)
Carrying bag (SH-TS200)
TV spigot (FB-TV)
Truss clamp (TC-02)
Truss clamp to TV spigot adaptor (TC-TV)
| TS 200 Series
7
System example
VA 215-200 system (2 x TS 200, 2 x PSD 215)
8 | TS 200 Series
Bosch Sicherheitssysteme GmbH Robert-Bosch-Ring 5 85630 Grasbrunn Germany
www.dynacord.com
© Bosch Sicherheitssysteme GmbH, 2013 | Data subject to change without notice Document Number F01U284603 | Vs1 | 05. Sep 2013
Ordering information
TS 200
2 x 6" / 1" full-range cabinet; aluminum housing; 1,200W/300W (peak/RMS); 8 Ω; black
Order number F.01U.283.237
Accessories
WMK-10
Rotatable Wall-Mount-Kit, black; max.10 kg
Order number F.01U.119.022
TA-TS400
Tilt adaptor for TS-Series Speakers
Order number F.01U.267.861
FB-TS400
Flying Kit for TS-Series Speakers
Order number F.01U.267.862
SH-TS200
Dust cover/bag for TS 200
Order number F.01U.283.243
TC-TV
Truss Clamp > TV Spigot 2" Truss Adapter
Order number F.01U.100.727
TC-02
Truss clamp 43-50 mm
Order number F.01U.100.657
SH-TS200
Dust cover/bag for TS 200
Order number F.01U.283.243
TC-TV
Truss Clamp > TV Spigot 2" Truss Adapter
Order number F.01U.100.727
TC-02
Truss clamp 43-50 mm
Order number F.01U.100.657
FB-TV
TV Spigot for Flying-Brackets for: PM-TV or TC-TV
Order number F.01U.100.845
FB-TV
TV Spigot for Flying-Brackets for: PM-TV or TC-TV
Order number F.01U.100.845
TS 200W
2 x 6" / 1" full-range cabinet; aluminum housing; 1,200W/300W (peak/RMS); 8 Ω; white
Order number F.01U.283.238
Accessories
WMK-10W
Rotatable Wall-Mount-Kit, white, max. 10 kg
Order number F.01U.119.032
TA-TS400
Tilt adaptor for TS-Series Speakers
Order number F.01U.267.861
FB-TS400
Flying Kit for TS-Series Speakers
Order number F.01U.267.862
Loading...