Dynacord SUB 1.15 DATASHEET
Features:
• Power Handling Rated 500 W / 8 Ohms
Peak 2000 W
• 15‘‘ EVS-15S LF Transducer
• Integrated Low Pass Filter
• 93 dB Sensitivity, 125 dB Maximum SPL
• Pole Mount to elevate a Loudspeaker
Wir weisen ausdrücklich darauf hin, dass bei
gehängten Lautsprecherboxen die einschlägigen
Sicherheitsbestimmungen zu beachten sind. Es
muss unbedingt qualifizierte Fachberatung in
Anspruch genommen werden!
Technische Informationen
Engineering Data Sheet
Sub 1.15
1 x 15“
Subwoofer
Sub 1.15
Order No. F01U165094
Cabinet Subwoofer
Configuration Vented-Direct Radiator
Nominal impedance 8 Ohms
Minimum Impedance 7.1 Ohms
Rated Power RMS 500 W
Peak Power 2000 W
Sound pressure level
SPL 1 W / 1 m 93 dB
Max. SPL 1 m (calculated
with peak power)
Frequency Range (-10 dB) 40 Hz to 260 Hz
Nominal Coverage Angle
(Horizontal x Vertical)
LF Transducer EVS-15S, 15‘‘ (381 mm) driver
Connectors 2x Neutrik Speakon NL4
Dimensions (W x H x D) 445 mm x 605 mm x 550 mm
Net Weight 28.5 kg (62.8 lbs)
Shipping Weight 31.4 kg (69.2 lbs)
Enclosure material MDF with D-PUR PLUS
Grille Steel, Black Finish with Acoustic Gauze
Warranty 5 years
Spare Parts
LF Transducer F01U106974
125 dB
Omnidirectional
Sub 1+ / 1-
Wired through 2+ / 2-
(17.5“ x 23.8“ x 21.7“)
We expressly point out that the relevant safety
regulations must be observed for “flying”
loudspeaker systems. It is imperative that qualified expert advice is sought.
Beschreibung Description
Der Subwoofer Sub 1.15 (1 x 15" EVS-15S woofer) ist die ideale kompakte Bass-Erweiterung für die Corus C 12.2 Fullrange-Box. Aufgrund des eingebauten Tiefpass-Filters
kann sie bei Bedarf einfach im Single-Amp-Betrieb parallel betrieben werden.
Empfehlenswert ist darüber hinaus natürlich die Kombination mit den Controllern DSP
260 oder DSP 600 und Endstufen der SL-Serie oder LX-Serie zum Aufbau aktiver Zweiweg-Systeme.
Illustration 1: Dimensions
The subwoofer Sub 1.15 (1 x 15" EVS-15S woofer) is the ideal compact bass extension
for the Corus C 12.2 full-range cabinet. Thanks to the integrated low-pass filter, it can, if
desired, be operated simply in parallel in Single Amp mode. Also recommended, naturally, is the combination with the controllers DSP 260 or DSP 600 and power amplifiers
from the SL or LX series for the creation of active two-way systems.
Loading...