Dynabrade 51350, 51351 Important Operating, Maintenance And Safety Instructions
23 N•m
T
28 N•m
T
Oil: O1= Air Lube
Adhesive: A
2
= Loctite #271
A
6
= Loctite #380
A
8
= Loctite #567
A
10
= Loctite #243
A
14
= Loctite #518
Torque: N•m x 8.85 = In. - lbs.
Grease: G
1
= Lubriplate 630AA
Models:
51350 – 11" Long File
51351 – Versatility Kit
Two-Handed Air-Powered, 2,400 Strokes Per Minute.
Parts Page Reorder No. PD00•85
Effective December, 2000
Dynaline File Board Sander
Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools
(ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s
Warning/Safety Operating Instructions for more complete safety information.
1 01139 Bearing (3)
2 54467 Retaining Ring
3 95593 Set Screw
4 54468 Ring Gear
5 54465 Planetary Carrier
6 06213 Gear(2)
(incl. 01033 Bearing)
7 54475 Shaft (2)
8 07146 Packing
9 56046 Lock Ring
10 50659 Lock Ring Seal
11 57437 Front Bearing Plate
12 54470 Rotor Pinion
13 56047 Rotor Key
14 95988 Shim
15 95972 Shim (2)
16 54491 Rotor/Blade Set (5/pkg.)
17 51354 Cylinder
18 95971 Line-Up Pin
19 57056 Rear Bearing Plate
20 01206 Bearing
21 54183 Motor Housing
22 01020 O-Ring
23 56029 Valve Stem
24 54192 Valve Spring
25 95523 O-Ring (2)
26 56076 Valve Plug
27 01017 Pin
28 95020 Set Screw
29 54193 Gasket
30 54186 Adapter
31 01494 Inlet Bushing
32 95720 Screw (2)
33 01791
Lock Washer (2)
34 54689 Adapter
35 56091 Nozzle
36 54199 Muffler Seat
37 54195 Muffler (3)
38 54194 Muffler Cap
39 54187 Throttle Lever
40 51358 Housing Cover
41 54188 Rubber Grip
42 57438 Counter Weight
43 57439 Rail (2)
44 96027 Screw (4)
45 95642 Screw (2)
46 95641 Nut (2)
47 57424 Gear Box (2)
48 57429 Felt Seal (4)
49 57431 Transfer Pinion (2)
50 57430 Cam Assembly
51 57445 Needle Bearing
52 57433 Slide Board
53 01211 Lock Washer (2)
54 95885 Screw (2)
KEY
A
O
T
G
1
3
4
2
5
1
6
7
1
8
10
9
12
11
14
13
15
17
16
18
19
20
21
22
23
24
25
26
27
29
30
25
33
38
37
36
35
34
41
A
2
2.82 N•m
T
A
8
O
1
39
40
43
45
46
47
48
52
53
54
A
10
A
14
A
6
G
1
G
1
A
2
G
1
G
1
A
10
A
2
O
1
42
51
28
31
49
44
50
Index Key
No. Part # Description
32
Important Operating, Maintenance and Safety Instructions
Carefully read all instructions before operating or servicing any Dynabrade®Abrasive Power Tool.
Warning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration.
Important: All Dynabrade Rotary Vane air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties.
Operating Instructions:
Warning: Eye, face, respiratory, sound and body protection must be worn while operating power tools. Failure to do so may result in serious injury or death.
Follow safety procedures posted in workplace.
1. With power source disconnected from tool, securely fasten abrasive / accessory on tool.
2. Install air fitting into inlet bushing of tool. Important: Secure inlet bushing of tool with a wrench before attempting to install the air fitting to avoid damaging
valve body housing.
3. Connect power source to tool. Be careful not to depress throttle lever in the process.
4. Check tool speed with tachometer. If tool is operating above 8,250 RPM the tool should be serviced to correct the cause before use.
Maintenance Instructions:
1. Check tool speed regularly with a tachometer. If tool is operating at a higher speed than the RPM marked on the tool, the tool should be serviced to correct
the cause before use.
2. Some silencers on air tools may clog with use. Clean and replace as required.
3. All Dynabrade Rotary Vane air motors should be lubricated. Dynabrade recommends one drop of air lube per minute for each 20 SCFM (example: if the
tool specifications state 40 SCFM, set the drip rate of your lubricator at 2 drops per minute). Dynabrade Air Lube (P/N 95842: 1pt. 473ml.)
is recommended.
4. An Air Line Filter-Regulator-Lubricator must be used with this air tool to maintain all warranties. Dynabrade recommends the following: 10681 Air Line
Filter-Regulator-Lubricator — Provides accurate air pressure regulation, two-stage filtration of water contaminants and micro-mist lubrication of pneumatic
components. Operates 55 SCFM @ 100 PSIG has 1/2" NPT female ports. If Dynabrade air lube is not compatible with paint system it may be substituted
with a compatible air tool lubricant with water absorbing properties to prevent internal components from rusting.
5. Use only genuine Dynabrade replacement parts. To reorder replacement parts,please specify the Model #, Serial # and RPM of your machine.
6. A Motor Tune-Up Kit (P/N 96531) is available which includes assorted parts to help maintain motor in peek operating condition. Please refer to
Dynabrade's Preventative Maintenance Schedule for a guide to expectant life of component parts.
7. Mineral spirits are recommended when cleaning the tool and parts. Do not clean tool or parts with any solvents or oils containing acids, esters, keytones,
chlorinated hydrocarbons or nitro carbons.
(PD00•85)
2
51350 11" (279) 3-3/4" (95) 3.1 lbs. (1.4) 18 (510) 85 dBA .25 (186) 90 (6.2) 3/8" (10) 2,400
Model Length Height Weight Air Flow Rate Sound Motor Air Pressure Stroke Strokes
Number Inch (mm) Inch (mm) Pound (kg) SCFM (LPM) Level HP (W) PSIG (Bars) Inch (mm) Per Minute
Additional Specifications: Air Inlet Thread 1/4" NPT •Hose I.D. Size 1/4" (8 mm).
•
Important: User of tool is responsible for following accepted safety codes such as those published by the American National Standards Institute (ANSI).
•
Operate machine for one minute before application to workpiece to determine if machine is working properly and safely before work begins.
•
Always disconnect power supply before changing abrasive/accessory or making machine adjustments.
•
Inspect abrasives/accessories for damage or defects prior to installation on tools.
•
Please refer to Dynabrade’s Warning/Safety Operating Instructions Tag (Reorder No. 95903) for more complete safety information.
•
Warning: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.
Notice
All Dynabrade motors use the highest quality parts and metals available and are machined to exacting tolerances. The failure of quality pneumatic motors can
most often be traced to an unclean air supply or the lack of lubrication. Air pressure easily forces dirt or water contained in the air supply into motor bearings
causing early failure. It often scores the cylinder walls and the rotor blades resulting in limited efficiency and power. Our warranty obligation is contingent upon
proper use of our tools and cannot apply to equipment which has been subjected to misuse such as unclean air, wet air or a lack of lubrication during the use
of this tool.
Safety Instructions:
Products offered by Dynabrade should not be converted or otherwise altered
from original design without expressed written consent from Dynabrade, Inc.
Lifetime Warranty
All Dynabrade portable pneumatic power tools are rigorously inspected and performance tested in our factory before shipping to our customers. If a Dynabrade tool develops
a performance problem and an inherent defect is found during normal use and service, Dynabrade will warrant this tool against defects in workmanship and materials for the
lifetime of the tool. Upon examination and review at our factory, Dynabrade shall confirm that the tool qualifies for warranty status, and will repair or replace the tool at no
charge to the customer. Normally wearable parts and products are NOT covered under this warranty. Uncovered items include bearings, contact wheels, rotor blades,
regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade’s warranty policy is contingent upon proper use of our tools
in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or
tampering in any way so as to affect its normal performance. To activate lifetime warranty, customer must register each tool at www.dynabrade.com. Dynabrade will not honor
lifetime warranty on unregistered tools. A one-year warranty will be honored on all unregistered portable pneumatic power tools. Lifetime warranty applies only to portable
pneumatic tools manufactured by Dynabrade, Inc. in the USA. Lifetime warranty applies only to the original tool owner; warranty is non-transferable.
Loading...