Dynabrade 50347, 50345, 50349, 50360 Operating, Maintenance And Safety Instructions

Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1 and B7.1) and any other applicable
safety codes and regulations. Please refer to Dynabrade's Warning/Safety Operating Instructions for more complete safety information.

Models:

50347 — 6,000 RPM

2.0 HP 7" Right Angle Disc Sander

Parts Page Reorder No. PD96•21

Effective April, 1996

Supersedes PD 93•22

Air Motor and Machine Parts; with 5/8" male spindle

*

52184

Bevel Gear/
Pinion Set

52131 Spindle

50505

Bearing

52147

Spacer

50412

Felt Ring

52089

Washer

52118

Spindle Nut

01697 Inlet Bushing

01017 Pin

01089 Lever

07142

Bushing

07141 Valve Body
(Incl. 07142 Bushing)

07168

Valve Stem Assy.

07145 Spring

07146 Packing

07147 Plug

01746 “O” Ring

02626 Adj. Bushing

50541 Governor Valve

96059 Governor Pin (2)

50468 Pin

50530 Governor Weight (2)

52171 Governor Cage

01266 Bearing
52140 Bearing Plate

50509 Key

52136 Bearing Plate

52141 Shim (3/pkg.) (as req.)

52130 Bearing

*52184 Bevel Gear/Pinion Set

95998 Ring

WARNING

!

02658 Packing

07136 Grip

52123 Adapter

50548 Spring Holder

52139 Cylinder

07109 Vane (5) (5/pkg.)

07108 Rotor

01673 Pin (2)

02631 Nut

52148 Shim Pack

(3) (as req.)

See inside for Important

Operating, Maintenance and

Safety Instructions.

52135 Housing (Incl. 01041 Fitting)

52165 Gasket

52166 Seal

52164 Exhaust Cover

52168 Silencer

52167

Felt Silencer

52169 Handle Assembly

52180 Clamp

01791 Washer (2)

50511 Screw (2)

01041 Grease Fitting

52091

Retainer

52172 Governor Spring

52173 Shim (as req.)

*Sold as a set only

02649 Bearing

50497

Bearing Washer

95897 Screw (5)

2

50277 – 7" Back-up Pad Assembly

• 7,000 RPM max.

• Hard density.

• Includes 50273 Flange Nut.

50283 – 7" Spiralcool® Disc Pad Assembly, 8,500 RPM max.
50284 – 9" Spiralcool® Disc Pad Assembly, 6,500 RPM max.

• Spiral ribs provide contact points and form channels extending disc life.

• Slotted hub draws cool air between the disc.

• Medium density.

• Includes 50286 Flange Nut.

• Optional 96038 Spanner Wrench available.

95049 – 3/16" Hex Key

95304 – 24mm Open-End

Dynaswivel®

Swivels 360° at two locations which allows
an air hose to drop straight to the floor, no
matter how the tool is held.

• 95462 1/2" NPT

*Spacers

*Sanding Pad

*Sanding Disc

*Flange Nut
*Spanner Wrench

*Not included

Sand with this surface.

Mounting Arrangement

Optional Disc Pad Assemblies

Optional Accessories

Standard Wrenches

96043 Motor Tune-Up Kit:

Includes assorted parts to help
maintain motor peek operating
condition.