Dynabook UPABWC001BT User Manual
Toshiba BluetoothTM Wireless Communicator
PABWC001 Manual
CAUTION
CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE MANUFACTURER FOR
COMPLIANCE COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT
CAUTION
In order to comply with FCC radio-frequency radiation
exposure guidelines for an uncontrol led exposure,
this device and its antenna must not be co-located or
operating in conjunction with any other antenna or
transmitter.
CAUTION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
■ Main Features
Bluetooth
communicator using BluetoothTM technology (and is abbreviated
“BWC”). It can be used for the purposes described below through
communications with other devices using BluetoothTM technology.
Play, stop, fast-forward …
To listen to music, the audio/video playback application on the
computer, to which the BWC is connected, can be operated
remotely.
• Operation by voice command
TM
Wireless Communicator (PABWC001) is a wireless
1) Wireless listening to music on a computer (AUDIO mode)
Audio data
BWC
(wireless operation)
Computer
Audio data
Computer
BWC
Play, stop, fast-forward …
(voice operation)
The audio/video playback application on the computer can be
operated remotely by voice commands via the microphone.
2
2) Wireless use of electronic conference applications on a
computer (COM mode)
Computer
Electronic
conference
2
Audio
communications
Computer
BWC
1
The user can participate in electronic conferences on the computer
to which the BWC is connected.
1
3) Wireless telephone calls received on a mobile phone
BWC
Mobile
phone
2
Voice
Connection
Call
Mobile phone
1
Calls placed to mobile phone 1 can be answered with the BWC.
3
■ Names of Parts
BluetoothTM Wireless Communicator
[Left side]
Microphone socket
Status LED (Blue)
Mode selector switch
(Bottom view)
L
Left shuttle push switch
HSP button
4
[Right side]
Power connector 2
(Bottom view)
Charging LED (Blue/Amber)
Power connector 1
Right shuttle push switch
Push to Talk button
Other accessories
• AC adapter • Power cable 1
• Arm microphone • Power cable 2
• Application software (CD-ROM)
• Manual
5
R
■ Before Using
Charging
Be sure to charge the BWC before using it for the first time after
purchase.
The BWC can be charged either by connecting the AC adapter or by
using the included power cable 2 and connecting it to a computer, etc.
[1] Charging using the AC adapter
1) Insert the AC adapter’s plug into power connector 1 on the
right side of the BWC and connect the AC adapter into a
main’s socket.
2) Check that the amber charging LED is lit.
3)
Full charging requires approximately 3 hours.
When the BWC is fully charged, the amber charging LED
switches off and the blue charged LED lights. To prevent
overcharging, disconnect the AC adapter once charging is
completed.
6
Loading...