Dynabook UPA3538WL User Manual



Information sheet

Wireless Interoperability

The Intel(R) Wireless WiFi Link 4965AGN products are designed to be interoperable with any wireless LAN
product that is based on Direct Sequence Spread Spectrum (DSSS)/Orthogonal Frequency Division
Multiplexing(OFDM) radio technology, and is compliant to:

■ The IEEE 802.11 Standard on Wireless LANs(Revision A/B/G and N Draft Ver.1.0), as defined and
approved by the Institute of Electrical and Electronics Engineers.

■ The Wireless Fidelity(Wi-Fi) certification as defined by the Wi-Fi Alliance.

a certification mark of the Wi-Fi Alliance.



CAUTION

Bluetooth
one another. If you use Bluetooth and WirelessLAN devices simultaneously, you may occasionally experience
a less than optimal network performance or even lose your network connection.
If you should experience any such problem, immediately turn off either one of your Bluetooth or
WirelessLAN.
Please contact Toshiba PC product support on web site
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
http://www.pc.support.global.toshiba.com in the United States for more information.
This device is restricted to indoor use due to its operation in the 5.15 to 5.85 GHz frequency range.



(R)

and WirelessLAN devices operate within the same radio frequency range and may interfere with

The “Wi-Fi CERTIFIED” logo is

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of
energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by

wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and
recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and result from deliberations of panels and
committees of scientists who continually review and interpret the extensive research literature.
In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building
or responsible representatives of the organization. These situations may for example include:

■ Using the Wireless LAN equipment on board of airplanes, or

■ In any other environm ent where the risk of interference to other devices or services is perceived or

identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or
environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to
turning on the equipment.

Regulatory Information

The Intel(R) Wireless WiFi Link 4965AGN must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that comes with the product. This device
complies with the following radio frequency and safety standards.


Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of this device.”

GM9024136120

*GM9024136120*

1

L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si
ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
The term "IC" before the equipment certification number only signifies that the Industry Canada technical
specifications were met.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a
l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel
(ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.
The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit
for the 5.25- to 5.35 and 5.725 to 5.85GHz frequency range in point-to point operation.
This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210, No 4 (Dec 2000) and
No 5 (Nov 2001).
Cet appariel numerique de la classe B est conforme a la norme NMB-003, No. 4, et CNR- 210, No 4 (Dec 2000)
et No 5 (Nov 2001)..

Caution:When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its

operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors
for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel
mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to

5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.

USA-Federal Communications Commission (FCC)

This device complies with Part 15 of the FCC Rules. Operation of the device is subject to the following two
conditions:(1)This device may not cause harmful interference. (2)This device must accept any interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the
devices included with this Intel(R) Wireless WiFi Link 4965AGN, or the substitution or attachment of
connecting cables and equipment other than specified by TOSHIBA.
The correction of interference caused by such unauthorized modification, substitution or attachment will be the
responsibility of the user.



Caution: Exposure to Radio Frequency Radiation.

The radiated output power of the Intel(R) Wireless WiFi Link 4965AGN is far below the FCC radio frequency
exposure limits. Nevertheless, the Intel(R) Wireless WiFi Link 4965AGN shall be used in such a manner that
the potential for human contact during normal operation is minimized. In normal operating configuration, the
LCD in the upright position, the distance between the antenna and the user should not be less than
20cm.(regular type)The antenna(s) used in this device are located at the upper edge of the LCD screen, and this
device has been tested as portable device as defined in Section 2.1093 of FCC rules when the LCD screen is
rotated 180 degree and covered the keyboard area.(tablet type) In addition, Wireless LAN has been tested

2