Dynabook UPA3374WL User Manual

TOSHIBA Wireless LAN Card
Installation

This sheet provides information on installing the Wireless LAN card in the PORTÉGÉ
M200.

CAUTION: This sheet is for information only. The Wireless LAN card must
be installed by dealers of TOSHIBA or TOSHIBA OEM products.

NOTE: The Wireless LAN card is a wireless network card that complies
with the IEEE 802.11 standard for Wireless LANs (Revision B.)

Installing the Wireless LAN card

1. Discharge static electricity from your body by touching a metal object, before
you handle the card.

2. Turn off the power and disconnect the AC adaptor.

3. Lay the computer upside down.

4. Remove the battery pack from the computer. For instructions on removing the
battery pack, refer to Chapter 6 in the online manual.

1

5. Remove twenty screws securing computer’s under cover. (One screw is situated
under the battery pack.)

NOTE: Use a point size 0 Phillips screwdriver.

Figure 1 Removing twenty screws

6. Loosen one screw securing the memory module cover and lift off the cover.
Remove the memory module. Refer to Chapter 8 in the online manual for details.

7. Loosen one screw securing the HDD cover and lift off the cover.

Figure 2 Removing the memory module cover and HDD cover

2

8. Slide the HDD and remove it.

Figure 3 Removing the HDD

9. Disconnect the VGA fan cable under the memory module.

Figure 4 Removing the VGA fan cable

3