
Bluetooth™ SD card
User's Manual
Rev. 1.2 (May 16, 2001)
Confidential
TOSHIBA CORPORATION
Digital Media Network Company
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 1

Revision History
Revision Date Comments
1.0 2001-04-25 Initial Revision
Confidential
1.1 2001-04-26
1.2 2001-05-16
Page5: Added Mode name (Palm™Bluetooth™Card) and Model
No.(SD-BT00P) for OEM
Page3: Added a sentence in “Feature” section.
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 2

Confidential
Feature
Bluetooth™ SD card is an ultra small and thin card with has built-in antenna and SD/IO interface
compliant with SDIO-spec issue by SD Association. Also, as data transmitter/receiver ,CSR’s
BlueCore01, which covers Baseband protocol and Link manager protocol, is incorporated into this card
to enable any kind of devices which incorporate SDIO-spec SD card slot and the driver software for
Bluetooth™ SD card to communicate with each other through this card.
Bluetooth™ SD card can be used with any kind of devices which have SDIO card slot and software for
Bluetooth SD card, i. e. PDAs, portable P Cs, desktop PCs, digital still cameras, cellular phones.
Appearance
Direction of inser tion
Ind icat ion la mp (green )
It ligh ts on dur in g communicat ion.
Installation
When inserting this card into SD card slot, check the form of the connector and insert it surely.
Connect the Bluetooth™ SD Card to a PDA.
•
This drawing is an example.
As for the position where the
Bluetooth™ SD card is
connected, refer to the User’s
Manual of P DA.
PDA supporting the SD/IO Card
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 3

What you can do with the Bluetooth™ SD Card
(1) Mobile communicat ion with cellular phones
PDA Cellular phone
(2) Data communication between digital still cameras and PCs
Confidential
Digital still camera
PC with Bluetooth
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 4

Specifications
Confidential
Model name BluetoothTM SD Card
Palm™ Bluetooth™ Card
Model No. SD-BT00A, SD-BT00U, SD-BT00P
Bluetooth™
Bluetooth™ Ver.1.0b*2 + critical errata
*1
*1
*1
specification
Specification of
electric
Operating voltage : 3.1 to 3.6V
At initializing the card, the voltage of 1.6V to 3.6V is
supplied and some parts of SD-IO controller operate.
RF specification In conformity with Bluetooth radio specification
Transmission electric power class : Power class 3
[ maximum output : 1mW (0dBm)]
Sensitivity of receiving : –70dBm
Power management: No
Dimension 49mm-high x 24mm-wide x 2.1mm-thick
A part of protrusion is 2.8mm-thick.
Indication
function
LED : green (It lights during communication.)
No light can be selected on by user.
*1 : SD-BT00A, SD-BT00U (for Toshiba product)
SD-BT00P ( for OEM product )
There is no difference among product with the number in hardware and firmware.
*2 : Bluetooth Special Interest Group, Document No. 1.C.47/1.0B, December 1, 1999
Ripple voltage :
50mVp-p or less
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 5

Confidential
Ohme, April 25 , 2001
Place, Date Sign Hiroshi Hamada
Bluetooth™ SD card User's Manual Rev. 1.1 (April 26, 2001) 6