Confidential
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual
Draft Rev. 1.0c
(February 27, 2003)
TOSHIBA CORPORATION
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c (February 27, 2003)
1
Confidential
Revision History
Revision Date Comments
Draft 1.0
Draft 1.0a
Draft 1.0c
2002-06-24 Draft
2002-07-02 Change notification statements.
2003-02-27 Change notification statements. Add some description statements.
(*) The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 2
Confidential
Feature
Bluetooth™ SD card is an ultra small and thin card which has built-in antenna, Bluetooth™ function
and SD/IO interface compliant with SDIO Card Specification.
Bluetooth™ is a low-cost and low-power wireless communication standard for short range
communication which uses 2.4GHz ISM band and GFSK modulation method. Bluetooth™ specification
is standardized by Bluetooth SIG and it is industry-widely supported.
SDIO Card Specification is a standard for small size IO devices. SDIO Card Specification is
standardized by SD As sociation and it is also industry-widely s upported.
Bluetooth™ SD card can be used with any kind of devices which have SDIO card slot and software for
Bluetooth SD card, e.g. PDAs, portable PCs and desktop PCs.
Appearance
Direction of insertion
Installation
When inserting this card into SD card slot, check the form of the connector and insert it s urely.
• Connect the Bluetooth™ SD Card to a PDA.
This drawing is an example.
As for the position where the
Bluetooth™ SD card is
connected, refer to the User’s
Manual of P DA.
PDA supporting the SD/IO Card
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 3
Confidential
What you can do with the Bluetooth™ SD Card
< Data communication between a PDA and a PC >
PDA supporting the
SD/IO Card
PC with Bluetooth
Please refer to the user’s manuals of PDA, PC and application software, with which Bluetooth™ SD
card is used, for the details of usage a nd operation.
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 4
Confidential
Specifications
Model name SDIO Card Type-B for Bluetoot hTM
Model No. SD-BT2
Bluetooth™ specification Bluetooth™ Ver.1.1 *1
Specification of electric Operating voltage : 3.1 to 3.6V
Power Consumption :
100mA(MAX.)
50mA(AVG. in transmitting/receiving)
RF specification In conformity with Bluetooth radio specification
Transmission electric power class : Power class 3
[ maximum output : 1mW (0dBm)]
Sensitivity of receiving : –70dBm
Host-Card Interface SDIO Card Specification V1.0
SDIO Card Type-B Specification for Bluetooth™
Dimension 40mm-long x 24mm-wide x 2.1mm-thick
A part of protrusion is 2.8mm-thick.
Bluetooth™
Protocols/Profiles
implemented in the Card
RF, Baseband, LMP, L2CAP*2, SDP*2, RFCOMM*2, GAP*2,
SPP(Serial Port Profile)
*2
, SDAP(Service Discovery Application Profile)
*2
*1 : Bluetooth Special Interest Group, Document number 1.C.47/1.1, February 22nd, 2001
*2 : It is supported when the card is in “
SDIO Card for Bluetooth Type-B” mode.
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 5
Confidential
Using this products
• Using this products
***WARNING
Do not perform disassembly, modifications or repairs.
There is a danger of fires, electrical shock, damage to the unit, and injury.
Do no remove the label and do not paste the other labels.
Dismantling this product will invalidate t he warranty and any other service plan.
Do not use this unit in an area where people wearing pacemakers may be nearby (such as in a
crowded train).
Electrical signal s ma y cause abnormalities i n p acemaker operation.
Those with a pacemaker should operate this system from a minimum distance of 22cm or more.
Electrical signal s ma y cause abnormalities i n p acemaker operation.
Do not use this unit near medical electronic equipment. Likewise, do not attach medical
electronic equipment to this system.
Electrical signals may cause abnormalities in the operation of me dical electronic equipment.
Do not use this unit near automatic doors, fire detection devices, or other automatic control
devices.
Electrical signals may affect these devices, leading to accidents caused by malfunctions.
Do not use this unit in an aircraft or in a place where this unit may electromagnetically affect
other devices.
An electromagnetically wave may affect these devices and cause accidents by malfunct ion s.
If this unit give any electromagnetic interference to other device during use of this unit, turn off
the system that this unit is mounted. If the system is not turned off, eject this unit from the
system.
Electrical signals may affect these devices, leading to accidents caused by malfunctions.
Do not put this unit into your mouth to avoid swallowing it.
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 6
Confidential
*** CAUTION
Do not use unit in the bath, or any other area where there is a chance of
submersion or high humidity.
There is a risk of electrical shock.
Do not insert staples or paper clips into the unit.
There is a danger of an electrical short, smoke, or fire.
Do not use unit in a location exposed to rain or mist.
Rain or mist on the unit may cause fires or electrical shock.
If the unit is connected to a personal digital assistant, do not touch the SD card
during or immediately following operation.
Do not use
in bath
Warning
Warning
Warning
There is a danger of burns resulting from hig h hea t lev els. Tho se w ith deli c ate
skin should use caution.
Do not place cups, flower vases or other containers holding liquid near unit.
There is a danger of electrica l shock if liquids enter the unit.
If liquids should enter the unit, turn the power off immediately, remove the
plug from the electrical outlet, and bring the unit to the place of purchase or a
nearby service center for inspection.
Warning
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 7
Confidential
Notes on Operation
Regarding the operating and storage environment for this unit
Do not place the unit in direct sunlight, a closed car, near a heating device, or
any other location where high temperature is a possibility.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not place the unit in a place susceptible to extremely low temperatures.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not subject unit to rapid temperature changes.
Dew formation may cause damage to the unit, malfunction, or interna l memory
loss.
Warning
Warning
Warning
Warning
Do not place unit in an extremely dusty location.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not use the unit in the following locations.
Near a microwave oven, or areas with a risk of electrical shock or static
electricity.
Depending on the environment, electricity may not reach unit.
Do not place the unit in a place with risk of strong vibration.
This may cause damage to the unit, malfunction, or internal memory loss.
When cleaning the unit, do not use benzene or paint thinner.
This may cause damage or discoloration to the case.
Warning
Warning
Warning
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 8
Confidential
Restrictions for Use
• Restrictions for Use
This product was not designed to be used with systems directly responsible for
sustaining human life (*1). Avoid using t his product with such systems.
*1: Systems directly responsible for sustaining human life include the following:
(Life support syste m s, systems for use in surgery, related medical equipment)
When this product is to be used in installations responsible for human safety or
the maintenance of public installations (*2), special transport, maintenance,
operation, and wiring (*3 ) become s nece ss ary. Please contact our se rvice c enter.
*2: Installations respons ible for human safety and public inst al lations include the following.
(Main control systems for nuclear power plants, safety installations in nuclear power plants,
other systems responsible for maintaining public safety)
(Mass transport systems, vehicle operation systems, or aerial control systems)
*3: Special wiring refers to safety systems (fool proofing, failsafe system installation, redundant installation)
installed in close consultation with a representative from our company.
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 9
Confidential
・FCC information
FCC notice
This device compli es with Part 15 of th e F CC Ru les. Operatio n i s subj ect t o th e fol lowing t wo co nd itio ns: (1)
This device may not cause harmful interference, (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution
CAUTION: End user can not modify this transmitter device. Any unauthorized modification made on the
device could avoid the user's authority to operate this device.
SDIO Card Type-B for Bluetooth™
SD-BT2
User's Manual Draft Rev. 1.0c
(February 27, 2003) 10
Loading...