B for Bluetooth™™™™ User's Manual 1.0 Draft (June 24, 2002)
B for BluetoothB for Bluetooth
1
Revision History
Revision Date Comments
1.0 Draft
(*) The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A
2002-06-24 Draft
Confidential
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
2
Confidential
Feature
Bluetooth™ SD card is an ultra small and thin card which has built-in antenna, Bluetooth™ function
and SD/IO interface compliant with SDIO Card Specification.
Bluetooth™ is a low-cost and low-power wireless communication standard for short range
communication which uses 2.4GHz ISM band and GFSK modulation method. Bluetooth™ specification
is standardized by Bluetooth SIG and it i s industry-widely supported.
SDIO Card Specification is a standard for small size IO devices. SDIO Card Specification is
standardized by SD Association and it is also i ndustry-widely supported.
Bluetooth™ SD card can be used with any kind of devices which have SDIO card slot and software for
Bluetooth SD card, i.e. PDAs, portable PCs and desktop PCs.
Appearance
Direction of insertion
Installation
When inserting this card into SD card slot, check the form of the connector and insert it surely.
• Connect the Bluetooth™ SD Card to a PDA.
This drawing is an example.
As for the position where the
Bluetooth™ SD card is
connected, refer to the User’s
Manual of P DA.
PDA supporting the SD/IO Card
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
3
What you can do with the Bluetooth™ SD Card
< Data communication between a PDA and a PC >
Confidential
PDA supporting the
SD/IO Card
PC with B luetooth
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
othoth
User's Manual
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
4
Specifications
Model name SDIO Card Type-B for BluetoothTM
Model No. SD-BT2
Bluetooth™ specification Bluetooth™ Ver.1.1 *1
Specification of electric Operating voltage : 3.1 to 3.6V
Power Consumption :
100mA(MAX.)
50mA(AVG. in transmitting/receiving)
RF specification In conformity with Bluetooth radio specification
Transmission electric power class : Power class 3
[ maximum output : 1mW (0dBm)]
Sensitivity of receiving : –70dBm
Host-Card Interface SDIO Card Specification V1.0
SDIO Card Type-B Specification for Bluetooth™
Dimension 40mm-long x 24mm-wide x 2.1mm-thick
A part of protrusion is 2.8mm-thick.
Bluetooth™
Protocols/Profiles
implemented in the Card
*1 : Bluetooth Special Interest Group, Document number 1.C.47/1.1, February 22nd, 2001
*2 : It is supported when the card is in “SDIO Card for Bluetooth Type-B” mode.
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
5
Confidential
Using this products
• Using this products
Using this products
Using this productsUsing this products
***WARNING
***WARNING
***WARNING***WARNING
Do not perform disassembly, modifications or repairs.
There is a danger of fires, electrical shock, damage to the unit, and injury.
Do no remove the label and do not paste the other labels.
Dismantling this product will invalidate the warranty and any othe r service plan.
Do not use this unit in an area where people wearing pacemakers may be nearby (such as in a
crowded train).
Electrical signal s ma y cause abnormalities in p acemaker operation.
Those with a pacemaker should operate this system from a minimum distance of 22cm or more.
Electrical signal s ma y cause abnormalities in p acemaker operation.
Do not use this unit near medical electronic equipment. Likewise, do not attach medical
electronic equipment to this system.
Electrical signals may cause abnormalities in the operation of medical electronic equipment.
Do not use this unit near automatic doors, fire detection devices, or other automatic control
devices.
Electrical signals may affect these dev ices, leading to accidents caused by malfunctions.
Do not use this unit in an aircraft or in a place where this unit may electromagnetically affect
other devices.
An electromagnetically wave may affect these devices and cause accidents by malfunctions.
If this unit give any electromagnetic interference to other device during use of this unit, turn off
the system that this unit is mounted. If the system is not turned off, eject this unit from the
system.
Electrical signals may affect these dev ices, leading to accidents caused by malfunctions.
Do not put this unit into your mouth to avoid swallowing it.
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
othoth
User's Manual
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
6
*** CAUTION
*** CAUTION
*** CAUTION*** CAUTION
Do not use unit in the bath, or any other area where there is a chance of
submersion or high humidity.
There is a risk of electrical shock.
Do not insert staples or paper clips into the unit.
There is a danger of an electrical short, smoke, or fire.
Do not use unit in a location exposed to rain or mist.
Rain or mist on the unit may cause fires or electrical shock.
If the unit is connected to a personal digital assistant, do not touch the SD card
during or immediately following operation.
Confidential
Do not use
in bath
Warning
Warning
Warning
There is a danger of burns resulting from high h eat leve ls. Tho se with deli c ate
skin should use caution.
Do not place cups, flower vases or other containers holding liquid near unit.
There is a danger of electrica l shock if liquids enter the unit.
If liquids should enter the unit, turn the power off immediately, remove the
plug from the electrical outlet, and bring the unit to the place of purchase or a
nearby service center for inspection.
Warning
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
7
Notes on Operation
Regarding the operating and storage environment for this unit
Regarding the operating and storage environment for this unit
Regarding the operating and storage environment for this unitRegarding the operating and storage environment for this unit
Do not place the unit in direct sunlight, a closed car, near a heating device, or
any other location where high temperature is a possibility.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not place the unit in a place susceptible to extremely low temperatures.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not subject unit to rapid temperature changes.
Dew formation may cause damage to the unit, malfunction, or internal memory
loss.
Confidential
Warning
Warning
Warning
Warning
Do not place unit in an extremely dusty location.
This may cause damage to the unit, malfunction, or internal memory loss.
Do not use the unit in the following locations.
Near a microwave oven, or areas with a risk of electrical shock or static
electricity.
Depending on the environment, electricity may not reach unit.
Do not place the unit in a place with risk of strong vibration.
This may cause damage to the unit, malfunction, or internal memory loss.
When cleaning the unit, do not use benzene or paint thinner.
This may cause damage or discoloration to the case.
Warning
Warning
Warning
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
8
Confidential
Restrictions for Use
• Restrictions for Use
Restrictions for Use
Restrictions for UseRestrictions for Use
This product was not designed to be used with systems directly responsible for
sustaining human life (*1). Avoid using this product with such syst ems.
*1: Systems directly responsible for sustaining human life include the following:
(Life support syste m s, systems for use in surgery, related medical equipment)
When this product is to be used in installations responsible for human safety or
the maintenance of public installations (*2), special transport, maintenance,
operation, and wiring (*3 ) become s necess ary. Please contact our service c e nter.
*2: Installations respons ible for human safety and public instal lations include the following.
(Main control systems for nuclear power plants, safety installations in nuclear power plants,
other systems responsible for maintaining public safety)
(Mass transport systems, vehicle operation systems, or aerial control systems)
*3: Special wiring refers to safety systems (fool proofing, failsafe system installation, redundant installation)
installed in close consultation with a representative from our company.
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
9
y
f
Confidential
・・・・FCC information
FCC notice
This device compli es with Part 15 of th e F CC Ru les. Operatio n i s subj ect t o th e fol lowing t wo co nd itio ns: (1)
This device may not cause harmful interference, (2) this device must accept any interference received,
including interference that may cause undesired op erat ion.
FCC Caution
CAUTION:Change or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate th is equipment.
MPE(Maximum Permissible Exposure)
“RF Exposure Compliance------In order for this device to comply with F CC rules, un der the prov ision of Pa rt 15.247(b)(c),
it must operate in a manner that ensures that the public is not exposed to radio frequenc
energy levels in excess of the Maximum Perm issible Limits (MPE).
It is recommended that the antenna of this device be placed at 20 cm or more from its user
and any nearby persons, during continuous and extend data transmission. The users o
this device should ensure that the operation of this device is in compliance with these
provisions.”
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
10
Confidential
・・・・IC (Industry Canada)
To prevent radio interference to the licensed servic e, this devi ce is intended to b e operated indo ors and away
from windows to provide ma xi mum shielding. Equipme nt t hat is installed outdoors is subject t o licensing.
The term “IC:” before the radio certification number only signifies that Industry Canada technical
specifications we re met.
“Operation of this device is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operatio n of t he device.”
"The installer of this ra dio equ ip ment must e nsur e th at t he ante nna is lo cated or point ed such t hat
it does not emit RF field in excess of Health Canada limits for the ge neral population; consult
Safety Code 6, obtain able from Health Canada’s website www.hc-sc.gc.ca/rpb"
< Notice >
This device and its antenn a(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
End user can not modify this trans mit t er device.
Any unauthorized modific ation made on the device could avoid t he user's authority to operate this device.
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
11
Confidential
・・・・Taiwan
Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any
Article 17 Any use of low power radio frequency electric mac hinery shall not affect the av iation safety and
company, trader or user shall not change the frequency, increase the power or change the
features and functions of t he original design.
interfere with legal communications. In event that any interference is found, the use of such
electric machinery sha ll be stoppe d immediately, and reusing of such products can b e resumed
until no interference occurs after im provement.
The legal communicatio ns mentioned in the above item re fer to radio communications operate d
in accordance with telecommunication laws and regulations.
Low power radio frequency electric machinery shall resist against interference from legal
communications or from i ndust r i a l, scientific and medical radi o emission electric machinery.
・・・・EU R&&&&TTE
European Union (EU) and EFTA
This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark
accordingly.
Note that the radio frequency band used this equipment has not been harmonized in all the EU.
< Support Regions/Countries >
Austria, Belgium, De nmark, Finland, France, Germa ny, Greece, Iceland, Ireland, I t aly,
Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, The Netherlands, United Kingdom
directive
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
12
Confidential
Ohme, June 18 , 2002
Place, Date Sign
SDIO Card Type
SDIO Card Type----B for Blueto
SDIO Card TypeSDIO Card Type
B for Bluetooth
B for BluetoB for Blueto
oth™™™™
User's Manual
othoth
1.0
1.0 Draft
Draft
1.01.0
Draft Draft
(June 24, 2002)
13
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.