Dynabook DCE37529A Users manual

Page 1
CDM-
9000
TRI-MODE, WEB BROWSING DIGITAL CDMA TELEPHONE
OWNER’S OPERATING MANUAL
555 Wireless Blvd., Hauppauge, NY 11788 • 631-233-3300 • http://www.audiovox.com
© 2000 Audiovox Communications Corporation • Printed in Japan • 03/00
Page 2
TABLE OF CONTENTSTABLE OF CONTENTS
SAFETY INFORMATION FOR WIRELESS
HANDHELD PHONES.......................................... 6
PRECAUTIONS......................................................... 9
SYSTEM CONFIGURATION................................... 10
WRIST STRAP ATTACHMENT............................... 11
BATTERY INSTALLATION AND
RECHARGING.................................................... 12
To Attach the Battery Pack..................................... 12
To Detach the Battery Pack ................................... 12
To Recharge Battery ...............................................12
FUNCTIONS ............................................................ 14
External View ......................................................... 14
Function of Keys .................................................... 15
LCD Display Indication........................................... 15
GETTING STARTED ............................................... 16
Turning the Phone On/Off ...................................... 16
Antenna Position.................................................... 16
Receiving Signal Strength Indicator (
Battery Level Indicator ........................................... 16
Power Management ............................................... 16
BASIC OPERATION................................................ 17
Placing Calls ............................................................ 17
To Place a Call ............................................................ 17
To Terminate a Call ...................................................... 17
Last Number Redial..................................................... 17
To Dial the Last Number Received .............................. 17
Phonebook Dialing ...................................................... 17
To Mute a Phone Conversation ................................... 17
Speed Dialing .............................................................. 18
Quick Dialing ............................................................... 18
Emergency Call ........................................................... 18
OneTouch Emergency Call.......................................... 19
Emergency Call Mode ................................................ 19
Receiving Calls ........................................................ 19
To Receive a Call......................................................... 19
Any Key Answering...................................................... 19
Caller ID with Name .................................................... 20
Automatic Calls-in-Absence Indicator.......................... 20
Ringing Tone with Melody............................................ 20
Distinctive Ringing (Audible Caller ID)......................... 20
During Calls ............................................................. 20
To Adjust the Earpiece Volume .................................... 20
Scratch Pad Dialing..................................................... 20
Automatic Talk Timer ................................................... 21
Call Waiting ................................................................. 21
Three-Way Calling....................................................... 21
Standby .....................................................................21
Clock Indicator............................................................. 21
Clock Alarm ................................................................. 21
Countdown Timer ........................................................ 21
End to End Signaling .............................................. 22
Touch Tone™ from Display.......................................... 22
Touch Tone™ from Memory ........................................ 22
PHONEBOOK OPERATION ................................... 23
Phonebook Entry..................................................... 23
To Store a Number without Name ............................... 23
Overwrite Warning....................................................... 24
Auto Hyphenation........................................................ 24
Manual Hyphenation ................................................... 25
Automatic Storing into Phonebook .............................. 25
To Store Dual Numbers in Phonebook ........................ 26
To Store a Name with the Phone Number ................... 27
Alpha Mode ................................................................. 27
To Store a Ring Type with the Phone Number............. 29
2
)............ 16
Page 3
Recall Menu.............................................................. 30
Recall Menu Tree......................................................... 30
Phonebook Recall ................................................... 31
Phonebook Address Mode .......................................... 31
Phonebook Sort Scroll Mode ...................................... 31
Phonebook Key Word Search Mode ........................... 32
To Dial Dual Numbers ................................................. 33
To Review Long Numbers ........................................... 33
To Review Long Names............................................... 33
Prepending Dialing ...................................................... 33
Phonebook Edit ........................................................34
To Modify Numbers and Names .................................. 34
To Move Numbers and Names .................................... 35
To Change Priority of Dual Numbers ........................... 36
To Erase Numbers and Names ................................... 36
Secret Memory......................................................... 37
To Store a Secret Number ........................................... 37
To Recall a Secret Number ......................................... 37
Link Dialing .............................................................. 38
To Store Linked Numbers in Phonebook ..................... 38
To Place Calls using Linked Numbers ......................... 39
Voice Activated Dialing (VAD) ................................ 40
Voice Registration........................................................ 40
Reviewing the Registered Name................................. 41
Voice Activated Dialing ................................................ 41
To Register a Name to a Number Stored in Memory .......
To Delete the Registered Name .................................. 42
Call History .............................................................. 42
To Review Outgoing Call History ................................. 43
To Review Incoming Call History ................................. 43
To Review Scratch P a d................................................ 44
To Save a Number to Phonebook................................ 44
41
WEB BROWSING ................................................... 45
Web Access................................................................. 45
Browser Menu ............................................................. 45
Alpha Entry in Browser Mode...................................... 46
MESSAGING FEATURES....................................... 47
Voice Mail ................................................................. 47
Voice Mail Notification ................................................. 47
To Display the Number of Voice Mail Messages.......... 48
Voice Mail Dialing ........................................................ 48
Text Messages (Short Message Service) .............. 49
To Review a Text Message .......................................... 50
FUNCTION MENU................................................... 51
To Access Function Menu ...................................... 51
Function Menu Tree..................................................... 52
Lock Features .......................................................... 53
Security Code and Unlock Code ................................. 53
Keypad Lock (F11) ...................................................... 53
Phone Lock (F12) ........................................................ 54
Automatic Phone Lock (F13)....................................... 54
To Unlock the Phone ................................................... 54
To Change the Unlock Code (F14) .............................. 54
Display Features...................................................... 55
Own Telephone Number Display (F21)........................ 55
Backlight Control (Standby) (F22-1) ............................ 55
Backlight Control (In-Use) (F22-2) .............................. 56
Auto Hyphenation (F23) .............................................. 56
SMS Text Lines Selection (F24) .................................. 56
Contrast Control (F25)................................................. 56
Software V ersion Review (F26) ................................... 57
Last Rescan SID Indicator (F27) ................................. 57
PRL ID Review (F28)................................................... 57
Volume and Tone Controls...................................... 57
Alert Tone Volume Control (F31) ................................. 57
Ring Type Selection (F32) ........................................... 58
Key Tone Volume Control (F33)................................... 58
To Mute a Phone Conversation (F34).......................... 58
Sending DTMF (F35)................................................... 58
Setting T ones (F36) ..................................................... 59
Key Tone Length (F36-1) ............................................. 59
Single Alert Beep Tone (F36-2) ................................... 59
3
Page 4
Voice Mail Alert (F36-3)............................................... 59
Text Message Alert (F36-4) ......................................... 60
Caller ID Alert (F36-5) ................................................. 60
Service Mode Alert (F36-6) ......................................... 60
Voice Privacy Alert (F36-7).......................................... 60
One Minute Beep Tone (F36-8) ................................... 61
Low Battery Alarm (F36-9) .......................................... 61
Call Timers ............................................................... 61
Last Call Timer (F41-1)................................................ 61
Outgoing Call Timer (F41-2)........................................ 61
All Calls Timer (F41-3)................................................. 62
Lifetime Timer (F41-4) ................................................. 62
Web Total Timer (F41-5) .............................................. 62
Clock Indicator (F42) ................................................... 62
Clock Adjustment (F43)............................................... 62
Clock Alarm (F44) ....................................................... 63
Countdown Timer (F45)............................................... 64
System Features...................................................... 65
A/B System Selection (F51) ........................................ 65
Enhanced Roaming..................................................... 65
NAM Selection (F52) ................................................... 66
Force Analog Call (F53) .............................................. 66
System Settings (F54)................................................. 67
NAM Name Display (F54-1) ........................................ 67
Automatic NAM (F54-2)............................................... 67
Automatic Retry (F54-3) .............................................. 67
Enhanced Voice Privacy Service (F54-4) .................... 68
Anti Fraud Security Features....................................... 68
To Place a Call with the Manual PIN Entry .................. 69
To Place a Call with the Automatic PIN Feature.......... 69
To Place a Call to Voice Mail
using the Automatic PIN Feature............................. 69
To Turn the Automatic PIN Feature On/Off (F54-5) ..... 69
To Program or Change your Automatic PIN (F54-6) ... 70
Security Features .................................................... 70
Call Restriction (F61)................................................... 70
To Change Emergency Numbers (F62)....................... 70
To Turn On/Off OneTouch Emergency
Call Feature (F63) ................................................... 71
To Change the Security Code (F64) ............................ 71
Reset Functions (F65)................................................. 71
Call Timer Reset (F65-1)............................................. 71
Phonebook All Clear (F65-2)....................................... 72
Call History All Clear (F65-3)....................................... 72
Text Message & Voice Mail All Clear (F65-4) .............. 72
Function Reset (F65-5) ............................................... 72
Data Communications............................................. 72
Data/Fax Mode (F71) .................................................. 72
Web Browser Setup (F72)........................................... 73
Web Lock (F72-1)........................................................ 73
Web Backlight (F72-2)................................................. 73
Web Idle Timer (F72-3)................................................ 74
Web Link IP Addresses (F72-4) (F72-5)...................... 74
Web User Name (F72-6) ............................................. 74
Web Password (F72-7) ................................................ 74
Web Link Change (F72-8) ........................................... 74
Web Browser (F73) ..................................................... 75
Vibrator Alert ............................................................75
Other Functions........................................................75
Quick Dialing (F01)...................................................... 75
Automatic Answering (F02) ......................................... 75
Function Reset Status ............................................ 76
INDEX ...................................................................... 79
WARNING................................................................ 80
12 MONTH LIMITED WARRANTY ......................... 81
Quick Reference .................................................... 8 3
ACCESSORIES....................................................... 85
Touch Tone™ is a registered trade mark of AT & T.
4
Page 5
AUDIOVOX
A UDIOVOX
CDM-9000
CDM-9000
Tri-Mode CDMA/AMPS
Handheld Portable Cellular T elephone
In today’s fast paced world, it has become a necessity to have access to real-time inf ormation. Your communi­cations tools must provide you with this access from anywhere and at anytime. With that in mind, Audiovox developed the CDM-9000, our first Tri-Mode W eb Brows­ing wireless telephone.
The CDM-9000 features 800 MHz Amps/CDMA and 1900 MHz CDMA Tri-Mode operation f or enhanced na­tionwide service coverage. The digital phone features two easy to use soft keys that make surfing the web a breeze. The CDM-9000 also boasts a vibrating alert, voice recognition, and data capabilities. In addition, the phone features an enhanced phone book with 99 Al­pha/198 Numeric memory locations, one touch emer­gency dialing, 15 distinctive ringer options, and menu driven operation. And with a Lithium Ion battery provid­ing you with over 3 hours of talk time and 7 days of standby time, you’ll ha ve plenty of opportunity to use all of these advanced features.
The CDM-9000 cellular telephone has several optional accessories available, including: leather carrying case, extended Lithium Ion battery, cigarette lighter plug-in charger, desktop holder, AC adapter, Handsfree car kit and an earphone microphone and data cable.
And, of course, your new CDM-9000 digital handset provides you with something only an Audiovox phone can: the proven reliability that has made us one of the leading wireless handset providers.
Please take a few moments to read the f ollo wing pages of the user’s operation man ual. It will help you make the most efficient use of this valuable communications tool.
5
Page 6
SAFETY INFORMATION FOR
SAFETY INFORMATION FOR
WIRELESS HANDHELD PHONES
WIRELESS HANDHELD PHONES
Read this information before using your handheld portable Cellular Telephone.
EXPOSURE TO RADIO FREQUENCY SIGNALS
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) sig­nals. In August, 1996, the Feder al Communications Commis­sion (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992)
NCRP Report 88 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of the rele vant scientific literature. For example, over 120 scientists, engineers, and phy­sicians from universities, government health agencies, and industry reviewed the av ailable body of research to develop the ANSI Standard (C95.1). The design of y our phone complies with the FCC guidelines (and those standards).
ANTENNA CARE
Use only the supplied or an approved replacement an­tenna. Unauthorized antennas , modifications, or attach­ments could damage the phone and may violate FCC regulations.
PHONE OPERATION
Normal Position: Hold the phone as you would any
other telephone with the antenna pointed up and over your shoulder.
The meanings of the acronyms are:
ANSI : American National Standards Institute NCRP : National Council on Radiation Protection
and Measurements
ICNIRP: International Commission on Nonionizing
Radiation Protection
6
Page 7
Tips on Efficient Operation:
For your phone to operate most efficiently:
• Extend your antenna fully.
• Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
DRIVING
Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:
• Give full attention to driving — driving safely is your first responsibility.
• Use handsfree operation, if available.
• Pull off the road and park before making or answer­ing a call if driving conditions so require.
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF sig­nals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.
Pacemakers
The health Industry Manufacturers Association recom­mends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interf erence with the pace­maker. These recommendations are consistent with the independent research by and recommendations of Wire­less Technology Research.
Persons with pacemakers:
Should ALW AYS keep the phone more than six
(6”) inches from their pacemaker when the
phone is turned ON. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to
minimize the potential for interference. If you have an y reason to suspect that interfer-
ence is taking place, turn your phone OFF im-
mediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the e vent of such interf erence, y ou may want to consult your service provider [or call the cus­tomer service line to discuss alternatives.]
7
Page 8
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if they are ad­equately shielded from external RF energy. Your ph ysician may be able to assist you in obtaining this information.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manuf acturer of any equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted no­tices so require.
AIRCRAFT
FCC regulations prohibit using your phone while in the air. Switch OFF y our phone before boarding an aircr aft.
BLASTING AREAS
To avoid interfering with blasting operations, turn your phone OFF when in a “Blasting area” or in areas posted “T urn off two-wa y radio”. Obey all signs and instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a poten­tially explosive atmosphere and obey all signs and in­structions. Sparks in such areas could cause an e xplo­sion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are of­ten but not always clearly marked. They include fueling areas such as gasoline stations, below deck on boats, fuel or chemical transfer or storage vehicles using liq­uefied petroleum gas (such as propane or butane), ar­eas where the air contains chemicals or particles, such as: grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place ob­jects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-v ehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
8
Page 9
PRECAUTIONSPRECAUTIONS
Your Handheld Portable Telephone is a high quality piece of equipment. Before operating the equipment, read all instructions and cautionary markings on (1) AC Adapter, (2) Battery and (3) Product using Battery.
1. DO NOT use this equipment in an extreme environment where high temperature or high humidity exists.
2. DO NOT abuse the equipment. Avoid strik­ing, shaking or shocking. When not using the unit, lay down the unit to a void possib le damage due to instability.
3. DO NOT expose this equipment to rain or spilled beverages.
4. DO NOT use unauthorized accessories.
5. DO NOT disassemble the phone or its ac­cessories;If service or repair is required, return the unit to an authorized Audiovox cellular service center. If the unit is disas­sembled, the risk of electric shock or fire may result.
6. To prevent injury or burns, DO NOT allow metal objects to contact or short circuit the battery terminals.
7. DO NOT open the battery case. If the bat­tery is accidentally broken, a v oid skin con­tact with the internal chemical contents. If there is skin contact, wash the affected area immediately and seek medical advice.
8. DO NOT put the battery close to, nor dis­pose it into fire.
9. The product that you have purchased con­tains a rechargeable Battery. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this Battery into the municipal waste stream. Check with your local solid waste officials for proper disposal procedures in y our area.
9
Page 10
SYSTEM CONFIGURATIONSYSTEM CONFIGURATION
System configuration and the equipment list are as shown below.
Retractable Whip Antenna
5
Wrist Strap
1 Handheld Portable Telephone
2
Battery Pack
3
Desktop Holder
List of Equipment
No.
1
Handheld Portable Telephone
2
Slim Lithium Ion Battery Pack (BTR-4000)
3
Desktop Holder (DTH-4000)
4
AC Adapter (CNR-4000)
5
Wrist Strap
Name of the Equipment
10
4
AC Adapter
Page 11
WRIST STRAP ATTACHMENTWRIST STRAP ATTACHMENT
Attach the wrist strap to the phone through the strap
1
hole as shown below Then put the long loop through the smaller loop as shown below 2 .
1
.
11
2
Page 12
BATTERY INSTALLATION
BATTERY INSTALLATION
AND RECHARGING
AND RECHARGING
To Attach the Battery Pack
1
Insert the hook at the end of the Battery Pack into the slot at the end of the phone.
2
Press the Battery Pack down to lock the Battery P ack onto the phone.
2
1
To Detach the Battery Pack
1
Slide back the Release Latch as shown below.
2
Lift up to remove the Battery Pack from the phone gently.
1
2
Release Latch
To Recharge Battery
Your CDM-9000 has a built-in charger function. To re­charge the Battery Pack, alwa ys install the Battery Pack to the Phone.
1. Attach the Battery Pack to the Phone.
2. Insert the DC plug of the AC Adapter (CNR-4000) to the Desktop Holder (DTH-4000). Plug the AC Adapter to AC outlet.
3. Place the Phone with Battery Pack into the Desk­top Holder.
12
Page 13
4. Then the recharging starts. The display indicates now charging with animation. You can see a battery level indicator scroll­ing at the upper-right of the display.
5. For complete recharging, it is recommended that the phone is turned off dur­ing recharging.
6. When the recharging is completed, the display indicates fully char ged”.
7. It is normal that Battery Pack may become a little warmer during recharging.
The recharging time, from empty to full, depends on the environmental temperature, 0 to +35°C.
Battery Type
Slim Lithium Ion (BTR-4000) Extended Lithium Ion (BTE-4000)
Recharging Time
1.5 to 2 h
2.5 to 3.5 h
Desktop Holder
AC Adapter
Alternatively you can recharge the Phone using AC Adapter as illustrated below.
AC Adapter
Note: Do not f eed the power to the Phone without Bat-
tery Pack.
13
Page 14
FUNCTIONSFUNCTIONS
External View
Retractable Whip Antenna
Power Indicator
Receiving Signal Strength Indicator
Digital Mode Indicator
IN USE Indicator
Roaming Indicator
Message Indicator
Clock Alarm Indicator
Battery Level Indicator
Message Access Key (Soft Key 1)
Store Key
Send Key OneTouch
Emergency Key
Digit Keys
DC Power Jack
Voice Activated Dialing Key
Tri-Mode
Rm
S1 S2
STO
Rcl
F
ABC
1
2
GHI
JKL
4
5
PQRS
TUV
7
8
VAD
OPER
0
Incoming Call Indicator
Earpiece Earphone
Mic Jack Data
Connector Graphic
Display Voice Mail
Access Key
V
CLR
(Soft Key 2) Clear Key
End Key with Power On/Off
DEF
3
MNO
6
WXYZ
9
Web
Multi Function Key
Up-arrow Recall Function Down-arrow
Web Browsing Key
Microphone
14
Page 15
Function of Keys
Digit Keys
1
GHI
4
PQRS
7
VAD
Function Keys
Rcl
DEF
ABC
2
JKL
5
TUV
8
OPER
0
To enter Telephone Numbers,
3
Names or special characters
MNO
6
( or ).
WXYZ
9
Web
Emergency feature.
SEND key. To originate or receive a Call. END key. To terminate a Call and to tur n
the phone ON/OFF. To recall phone numbers from memory.
Also used as Left-arrow key. To be used with other keys to activate
F
various special features. Also used as Right-arrow key.
1
is also used for OneTouch
S1 S2
STO
V
CLR
Rcl
F
Key- Board Arrangement
To control Earpiece audio level, Alert Tone and Key Tone. Also used as Up/Down-arrow keys.
STO
To store phone numbers in memory. To clear digits from the display or from a
CLR
memory location. To review Text Messages or to learn how
many Voice Messages are in your Voice Mailbox. Also used as Soft key 1.
To access your Voice Mail with only one
V
key. Also used as Soft key 2.
LCD Display Indication
Items Descriptions
Receiving Signal Strength Indicator. The number of lines indicates the received Signal Strength, and is also used as a POWER ON Indicator.
Digital Mode Indicator. To indicate the phone is operating in digital mode.
A Call is in progress. The phone is out of Service Area.
Rm
The phone is out of the Home-Area. Message Indicator. To indicate that Text
Messages are stored in memory or Voice Messages are in your Voice Mailbox.
Shows that Clock alarm or count down timer is set up.
Battery Level Indicator. Monitors the battery charge condition.
Graphic full-dot matrix display with flexible font size in 2 to 4 lines.
15
Page 16
GETTING STARTEDGETTING STARTED
Turning the Phone On/Off
Press and hold . All the indicators and the digit dis­play will light momentarily, and a tone will be heard. The indicator will stay while the phone is turned on. To turn the phone off, press and hold .
Antenna Position
The antenna can be used in its fully extended or fully re­tracted position only. It is recommended that the antenna should be fully extended for optimum performance and signal strength or while operating in poor signal areas.
Receiving Signal Strength Indicator ( )
The number of lines indicates the Signal Strength in your area. Four lines sho w the maximum le v el. The dis­play will vary as you move with the phone. If the signal is not strong enough to place a call, “ on the LCD display.
” will appear
Battery Level Indicator
You can always monitor the battery charge condition with the constant battery level indicator . The number of blocks indicates the battery conditions as follows:
Full charge Low charge Flashing indicates discharged.
Power Management
Battery
Slim Battery (BTR-4000) Extended (BTE-4000)
The operating times are approximate values and may vary depending on network configuration and handset usage.
Mode
Digital Analog Digital Analog
Talk Time
up to
Standby Time
up to
16
Page 17
BASIC OPERATIONBASIC OPERATION
Placing Calls
To Place a Call
1. Enter the phone number. (A maximum of 32 digits will be displayed.)
2. Press
.
The indicator will light.
To Correct a Number
CLR
Press Press and hold
If the Call Fails to Go Through
to clear the last digit.
CLR
to erase all the digits entered.
Press , and to redial the number.
To Terminate a Call
Press . The indicator will go out.
Last Number Redial
Rcl
Press
VAD
to recall the last number you dialed, then press . See Call History on page 42 for details.
To Dial the Last Number Received
Web
Rcl
Press you received, then press See Call History on page 42 for details.
to dial the last number with Caller ID
.
Phonebook Dialing
Rcl
Press
and enter an address (01 to 99) to recall a number from your phonebook, then press . See Phonebook Recall on page 31 for details.
To Mute a Phone Conversation
F
Press during a call. “Mute” will be displayed. To return to normal conversation, press again.
F
to mute your conv ersation at any time
F
17
F
Page 18
Speed Dialing
If you know the phonebook address of the telephone number that you want to call, you ma y place a call with-
Rcl
out using
.
1. Enter the one or two digits of your Phonebook ad­dress (1 ~ 9 or 10 ~ 99).
2. Press
. The phone number will be displa yed. The indicator will light, and the call will be placed.
Note: If two telephone numbers are stored in the ad-
dress, the Primary Number will be dialed.
Quick Dialing
When this feature is on, the Primary number in your Phonebook address 02 to 09 can be dialed with just one push of the key. See Quick Dialing (F01) on page 75 to turn this feature on/off.
ABC
1. Press a digit key (
2
second.
2. The number in your phonebook is automatically dialed. The phone number will be displayed. The
indicator will light.
Note: The key 1 is not for Quick Dialing, b ut for One
Touch Emergency Call, page 19.
WXYZ
9
to
) for more than one
Emergency Call
This feature permits you to place an emergency call ev en if your telephone is in “Phone Lock”, “Keypad Lock” orRestrict” mode. Up to 3 numbers can be prog rammed as Emergency numbers. The emergency numbers “911” and
911” are already preprogrammed. See To Change
Emergency Numbers (F62) on page 70.
Example: To Call 911 in “Phone Lock” or “Key-
pad Lock” mode.
WXYZ
9
1. Enter played, but “Phone Lock” or “Keypad Lock” will be displayed.
2. Press The “911” will be displayed. The indicator will light, and the call will be placed.
1 1 . The “911” will not be dis-
.
18
Page 19
OneTouch Emergency Call
This feature permits you to dial an emergency number by a single key stroke, even in the “Phone Lock” o rRestrict” mode. This feature can be turned off to pre- vent unintentional calls to the emergency number. See To Turn On/Off OneTouch Emergency Call Fea- ture (F63) on page 71.
1. Press and hold number in emergency memory location “1” will be dialed.
2. Then the be placed. (The factory preset number is “911”.)
Note: This feature cannot be used if the Keypad Lock
is on. You need to dial all the digits and .
for more than 2 seconds. The
1
indicator will light, and the call will
Emergency Call Mode
When you dial one of the 3 pre-programmed emergency numbers, your phone will enter the Emergency Call Mode. In this mode , the phone will attempt to complete the emergency call using any availab le cellular system from which it can obtain service. After it places an emergency call, the phone will stay in the Emergency Call Mode, and will display “Emer-
gency Call Mode, END to exit”. In the Emergency Call Mode, the phone will attempt to continue to receive
service from the Cellular system that it used to com­plete the call. The phone will automatically exit the Emergency Call Mode after 5 minutes or after you press END.
Receiving Calls
To Receive a Call
When the telephone rings, press to answer the call. The indicator will light.
Any Key Answering
This feature permits you to answer an incoming call by pressing any key on the k ey pad except and
19
Rcl F
.
Page 20
Caller ID with Name
This feature allows you to preview in your display the number and name of the party calling you before you answer the call. The name is as you programmed it in your phonebook.
1. When the phone rings, the Calling Number ap­pears in the display.
2. The last 10 Caller IDs are stored in the memory for your review and redial. See Call History on page 42 for details.
Note: Number Restricted” or “Number Unavailable
is displayed when the Caller ID is restricted or not available.
Automatic Calls-in-Absence Indicator
This feature indicates the number of unanswered in­coming calls. If incoming calls are not answered, the LCD display will indicate “Called XX”. “XX” is the num­ber of calls (01 to 99) missed. Depressing any key will clear the display.
Ringing Tone with Melody
The CDM-9000 offers you 15 styles of ringer tones and melodies for alerting incoming calls. Ringer volume can also be adjusted. See Ring T ype Selection (F32) on page 58 and Alert Tone Volume Control (F31) on page 57 for setting. See also Vibrator Alert (F8) on page 75.
Distinctive Ringing (Audible Caller ID)
You may program different ringer styles for different phonebook addresses. See T o Store a Ring Type with
the Phone Number on page 29 for setting.
During Calls
To Adjust the Earpiece Volume
Simply press or to ad­just Earpiece V olume during a call.
Scratch Pad Dialing
If you enter a telephone number during a call, the num­ber will be stored in the Scratch Pad memory.
20
Page 21
After terminating the call, the number you entered can be dialed by .
Note: You can deactivate “Sending DTMF” so that k ey-
pad tones will not be transmitted to the calling party. See Sending DTMF (F35)
on page 58.
Automatic T alk Timer
The talk time of the current call will be automatically displayed. For example, “1h23m45s”.
Call Waiting
Your service provider may provide Call W aiting service. When you are on a call, you may hear beep tone alert­ing you of another incoming call. Your phone displays “New Caller” and the new caller’s ID with the name. The name is as you programmed it in your phonebook.
1. Press
2. Press
to answer the new call.
again to switch between the two calls.
Three-Way Calling
Your ser vice provider may provide Three-Way Calling service. When a call is already in progress, you may call the third party.
1. Enter a number and press party.
2. Press
Ask your service provider for the detailed infor mation.
again to connect all three parties.
to call the third
Standby
Clock Indicator
Date and Time are automatically displayed, if this fea­ture is enabled. See Clock Indicator (F42) on page 62 to turn this feature on/off.
Clock Alarm
This feature alert you repeatedly at the alarm time that you programmed. See Clock Alarm (F44) on page 63 for setting.
Countdown Timer
This feature alerts you when the countdown timer ex­pires. The timer can be set to 1 through 99 minutes. See Countdown Timer (F45) on page 64 for setting.
21
Page 22
End to End Signaling
T o utiliz e certain phone services, such as accessing an alternate long distance network, signaling a pager or banking by phone etc., Touch Tone™ signaling is re­quired. The following features will make it easy to send frequently used Touch Tone™ signals. See Link Dial-
ing on page 38 for more information.
T ouch T one from Display
When Sending DTMF (page 58) mode is on, the num- bers will be sent in Touch Tone™ signals dur ing a call as you press digit keys . When Sending DTMF mode is off, you can send T ouch Tone™ signals in the f ollo wing manner.
1. Enter the number.
F
2. Press “TONE”.
and scroll to
F
3. Press
. The number in the display will be
sent in Touch Tone™ signals.
T ouch T one™ from Memory
Touch Tone™ signals can be sent from memory during a call.
Rcl
1. Press number you want to send in T ouch Tone™ signals.
2. Press “TONE”.
3. Press sent in Touch Tone™ signals.
, and recall the
F
and scroll to
F
. The number in the display will be
22
Page 23
PHONEBOOK OPERATIONPHONEBOOK OPERATION
Your phone has an Enhanced Phonebook with 99 dual­number memory addresses. At each address, you can store up to two telephone numbers under one name. This feature allows you to store , under one name, a person’s home and office number, office and mobile number, etc. Stored numbers can be easily recalled and dialed by pressing added privacy .
Number of Digits per Phonebook Address
Address
01 to 90 91 to 99
Note
To program your phonebook, enter the infor mation in the following order . You may skip “Name”, “Option” and/ or “V oice”.
CLR STO STO
Number Name Option VoiceAddress
. Numbers can also be mark ed Secret for
Single Number or
Dual Numbers
Up to 32 digits Up to 32 digits Includes Dual Mark
and Manual Hyphens
Linked Numbers
Up to 40 digits Up to 80 digits Includes Link Marks
and Manual Hyphens
Phonebook Entry
To Store a Number without Name
1. Press
2. Press
Example: To store the phone number 1 2 3 4 5 6 7
1. Press
2. Enter
3. Press
4. Enter
CLR
, then enter the phone number.
STO STO
, then enter the desired memory
address (01 through 99).
8 9 0 in address 07.
CLR
.
ABC
DEF
1 2
JKL
MNO
6
STO STO
OPER
0
F
PQRS
7
PQRS
7
.
5
OPER
0
.
3
4
TUV
8
9
.
and press
23
GHI
WXYZ
Page 24
Overwrite Warning
When you attempt to store a number in an address where another number has been already stored, you will have OVERWRITE” warning.
Example: To store the number 9 8 7 6 5 4 3 2 1 0
in the address 07, where another num­ber 1 2 3 4 5 6 7 8 9 0 is already stored.
CLR
WXYZ
9
GHI
4
.
STO STO
OPER
0
.
TUV
PQRS
8
DEF
3
MNO
7
6
ABC
2
1
.
PQRS
.
7
1. Press
2. Enter
JKL
5
OPER
0
3. Press
4. Enter The already stored number is displayed momentarily.
5. Two seconds later.
6. If you accept to overwrite, scroll to YES” and press
F
F
.
7. If you do not want to overwrite, scroll to NO
F
and press
. The screen returns to the step
3 again.
Auto Hyphenation
With this feature on, hyphens are automatically inserted when you enter telephone numbers and when you re­call the numbers from the Phonebook. See Auto Hy- phenation (F23) on page 56 to activate or deactivate this feature.
Length of Number
10 digits or less 11 to 21 digits 22 digits or more
Note: When you manually insert hyphens, the “Auto
Hyphenation” f eature will not work for that par-
ticular number.
Display Example
123-456-7890 1-234-567-89012 No hyphens
24
Page 25
Manual Hyphenation
You can manually inser t a hyphen at any place when you enter a telephone number. The maximum number is 32 digits long including hyphens.
Example: To insert a hyphen in the number 1 2 3
4 5 6 7 to display it as 123-4567.
CLR
1. Press
2. Enter 1
3. Press HYPHEN.
4. Press
Enter
5.
.
ABC
2
3
F
and scroll to
F
.
GHI5JKL6MNO7PQRS
4
DEF
.
.
Automatic Storing into Phonebook
This feature allows conv enient automatic storing into a vacant phonebook address. The number will be stored in the first availab le memory address which will be indicated in the display. This f ea­ture can prevent the possib le overwriting of a previously stored number.
1. Enter the phone number.
2. Press
Example:
STO STO STO
To store the phone number 1 2 3 4 5 6 7 8 9 0 into a vacant memory address 04.
1. Press
CLR
2. Enter 1
JKL
MNO
5
6
OPER
.
0
3. Press
STO STO
.
2
PQRS
7
.
ABC
DEF
GHI
3
4
TUV
WXYZ
8
9
.
25
Page 26
4. Press
STO
F
.
To Store Dual Numbers in Phonebook
You can store Dual Numbers with Dual Mark \ up to 32 digits for all the address 01 to 99 in the phonebook.
Up to 32 digits
Primary Number \ Secondary Number
To store two telephone numbers in one phonebook ad­dress, enter the first number, select the Dual Mark \ by using Menu, then enter the second number.
Example: To store the primary number 1 2 3 4 5 6
7 8 9 0 and the secondary number 9 8 7 6 5 4 3 2 1 0 in address 08.
CLR
MNO
6
.
.
ABC
DEF
2
3
PQRS
TUV
7
8
F
and scroll to
GHI
4
WXYZ
9
1. Press
2. Enter 1
JKL
5
OPER
0
3. Press
DUAL MARK.
F
4. Press
. The Dual Mark \ is in­serted.
WXYZ
TUV
PQRS
5. Enter
JKL
5
OPER
0
6. Press
7. Enter
9
GHI
4
.
STO STO
OPER
0
F
8
DEF
3
TUV
8
.
.
and press
MNO
7
6
ABC
2
1
Note: You can add a second number after storing a
first number. See To Enter a Second Number on page 34.
26
Page 27
To Store a Name with the Phone Number
To use this procedure, you will need to refer to “Alpha Mode below.
1. Enter the phone number.
STO
2. Press
3. Enter the name.
4. Press through 99) to store the number with the name into memory.
Example: To store the phone number 1 2 3 4 5 6 7
Enter the phone number;
1.
1 2
MNO
6
2. Set Alpha Mode;
3. Enter the Name;
MNO
6
V
VAD
A,
PQRS
7
for O, and
4. Press
to select the Alpha Mode.
STO
, then enter the memory address (01
8 9 0 with the name Mr. JACKSON into memory address 11.
ABC
DEF
GHI
4
WXYZ
STO
JKL
5
OPER
.
0
3
PQRS
TUV
7
8
9
for “M,
PQRS
PQRS
7
MNO
6
ABC
2
PQRS
7
STO
PQRS
7
7
for “., V
ABC
ABC
2
2
PQRS
PQRS
7
7
MNO
6
6
.
for r”,
JKL
5
for C”,
for S”,
MNO
for N”.
for J”,
JKL
5
MNO
6
ABC
2
JKL
5
MNO
6
for “K,
MNO
6
F
for
F
5. Enter
1 1
F
and press
.
Alpha Mode
You can add an identifying name (Alpha Tag” up to 2 lines or 20 to 24 characters) to the phone numbers at each phonebook address.
To Enter Names using Alpha (Letters)
1. Press
2. Press
CLR
, then enter the
phone number.
STO
.
27
Page 28
3. Press digit key repeatedly to display the letter that you want. The following table shows which char­acter is assigned with each digit key. For example ,
DEF
to enter the letter “D”, press letter “F”, press
DEF
3
3 times.
once. For the
3
Assigned Alpha Characters
Key
1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 OPER
1 press
Blank
M / m
W / w
A / a D / d
G / g
J / j
P / p
T / t
0
2 press
1 B / b E / e H / h K / k N / n Q / q U / u X / x
3 press
C / c
F / f
I / i
L / l
O / o
R / r V / v Y / y
4 press
2 3 4 5 6
S / s
8
Z / z
5 press
7
9
4. To change from upper to lower case characters or vice versa, press V during entry of Alpha.
5. To enter special characters, press
VAD
or
Web
and a digit key to select characters from the tab le below.
Assigned Special Characters
VAD
1
!+2 4 7
?
3
5
-
6
8
/
9
6. If you make a mistake, press last character. Press and hold the characters on the display.
F
7. Press
to move the cursor, which inserts a
blank space after the last character.
Rcl
8. Press
to move the cursor back to insert new
characters.
9. To exit the Alpha Mode, press .
Note: Y ou must enter the phone number first, then add
the name. Entering a number after the name will erase the name.
Web
_
1
(
2
)
3
:
.
4
<
5
>
6
&
=
7
8
9
#
CLR
to erase the
CLR
to erase all
28
Page 29
To Store a Ring Type with the Phone Number (Distinctive Ringing)
Y ou can choose one of 15 ring types f or each phonebook address. With this feature, you will be able to distin­guish who is calling by hearing the ringing tone. The ring type is selected while storing the number when the word OPTION appears.
Example: To store a number with Ring Type #02
in the address 12.
1. Enter the phone number, and press
2. Press
STO STO
F
and scroll to
RING TYPE.
F
3. Press
and scroll to one of the numbers, which you want to set.
F
4. Press
and scroll to sample the different ring types.
F
5. Press
to set the new
ring type.
.
6. Enter
1 2
F
and press
.
ABC
Notes: 1. If you have one number only, the step 3 is
skipped.
2. The COMMON shown in the step 4 is the ring type you selected with the Function Menu. See Ring Type Selection (F32) on page 58.
29
Page 30
Recall Menu
Rcl
Press prompt you to recall the number from the memory.
Recall Menu Tree
Main Menu Sub-menu
key. The following “RECALL” menu will
•“ADDRESS” : Phonebook Address Mode
•“SEARCH” : Phonebook Sort Scroll Mode or Phonebook Key Word Search Mode
•“HISTORY” : Call History Mode
ADDRESS
SEARCH
HISTORY
(Sort Scroll)
(Key W ord)
OUTGOING
INCOMING
SCRATCHPAD
Phone-
book
Outgoing
History
Incoming
History
Scratch
Pad
VIEW TEL# VIEW NAME REPLAY MODIFY MOVE PRI. CHANGE ERASE
VIEW TEL# VIEW NAME SAVE ERASE
VIEW TEL# VIEW NAME SAVE ERASE
VIEW TEL# SAVE ERASE
Notes: 1. The submenu “PRI.CHANGE” will be avail-
able only when two telephone numbers are stored in that address.
2. The submenu “REPLAY” will be available only when your voice is stored in that ad­dress.
30
Page 31
Phonebook Recall
To recall the numbers stored in your phonebook, you have three methods: Address Mode, Sort Scroll Mode and Key Word Search Mode.
Phonebook Address Mode
This mode is useful in finding a phone number by re­calling a specific address or by scrolling the Phonebook.
Rcl
1. Press
2. Enter the two-digit Memory Address.
3. Press
Note: The scroll feature will skip any vacant memory
address(es).
Phonebook Sort Scroll Mode
This mode sorts and displays, in alphabetical order, tele­phone numbers stored with Alpha T ags (Names). Blank digits on top will be disregarded for scroll.
.
or to scroll.
Example: To display the numbers stored in the
memory alphabetically from J”.
Rcl
JKL
5
.
for J”.
F
.
.
.
1. Press
2. Press
3. Press
4. Press
5. Press
Note: When the Alpha Tag is 2 lines long, only the Al-
pha Tag is displayed without the telephone num­ber. However, a call can still be made by simply pressing
.
31
Page 32
Phonebook Key Word Search Mode
This mode searches and displays the character string of Alpha Tags stored in the Phonebook. Any part of the Alpha Tag can be used for the search.
Example: To search the char acter string AN stored
in the Phonebook.
Rcl
ABC
2
MNO
6
.
for A”.
MNO
6
F
.
for N”.
1. Press
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press
8. Press
.
.
.
.
Notes: 1. The key word can be searched regardless
of upper or lower case letters.
2. When the Alpha T ag is 2 lines long, only the Alpha Tag is displayed without the telephone number. However, a call can be made by simply pressing
.
32
Page 33
To Dial Dual Numbers
After the number is recalled in the display, it can be easily called by pressing .
To dial the primary number, just press
.
• To dial the secondary number, press .
Primary Number
Secondary Number
To Review Long Numbers
This feature allows you to review all the digits of very long numbers or numbers stored with Alpha Tags.
1. Use any of the previously described Phonebook search modes to recall a number.
F
2. Press
and scroll to VIEW TEL#, and the
entire digits of the number will be displayed.
To Review Long Names
This feature allows you to review whole Alpha Name Tag stored with dual numbers.
1. Use any of the previously described Phonebook search modes to recall a number.
F
2. Press
F
will be displayed.
and scroll to VIEW NAME. Press
again, and all the characters of the Name
Prepending Dialing
This feature will be convenient when you need to add an area code to the number in the phonebook.
Example: To add 1 2 3 to a n umber 4 5 6 7 8 9 0.
1. Recall the number.
ABC
DEF
2. Enter
3. Press
1 2
. Then the call is placed to 123-
4567890.
Note: The added digits will not be stored in the phone-
book memory.
.
3
33
Page 34
Phonebook Edit
This section guides you how to modify, move, change priority and erase the phonebook contents.
To Modify Numbers and Names
Y ou can modify an y of the phonebook contents you hav e stored, including Phone Numbers, Names, Ring Type, Secret and Address.
To Modify Phone Numbers
Recall the number from the phonebook. Press and press old digit(s) by pressing
To Modify Alpha Name Tag
Recall the number and proceed to “MODIFY” as above. Press
CLR
To Modify Address
After you modified number/name, just press out entering new address, and the current phonebook address will be overwritten. If y ou enter a new address , and press ied to the new address, while the original address will remain unchanged.
To Enter a Second Number
F
to select “MENU”, then scroll to “MODIFY
F
. Enter the new digit(s) and delete the
CLR
. To move the cursor, press
to left, to right.
STO
, and the Name Tag will appear by itself. Press
to clear the letter(s), and enter the new Name.
STO
STO
, the modified number/name will be cop-
with-
Example: To add the secondary number 9 8 7 6 5
4 3 2 1 0 in the address 07.
1. Recall the number stored in the memory address 07.
F
2. Press
and scroll to
MODIFY”.
F
3. Press
4. Press
.
F
and scroll to
DUAL MARK”.
34
Page 35
5. Press
F
. The Dual Mark “ \ ” is in­serted.
WXYZ
TUV
PQRS
6. Enter
JKL
5
OPER
0
.
7. Press
8. Press
9
GHI
4
STO STO
STO
.
8
DEF
3
.
MNO
7
6
ABC
2
1
The original number is dis­played momentarily.
9. Two seconds later.
10.
Press
F
F
to store in the original ad­dress.
To Move Numbers and Names
You can move the phonebook contents to a new ad­dress. The original address will then be erased.
Example: To move the number 1 2 3 4 5 6 7 8 9 0
from the address 20 to 15.
1. Recall the number stored in the address 20.
F
2. Press
and scroll to
MOVE”.
F
1 5
.
JKL
as a new
3. Press
4. Enter address.
35
Page 36
To Change Priority of Dual Numbers
You can interchange the primar y and the secondary numbers in a phonebook address. The submenu “PRI.CHANGE” will only be available when two tele- phone numbers are stored in that address.
Example:
1. Recall the number.
Primary Number
Secondary Number
F
2. Press “PRI.CHANGE”.
3. Press The display shows the sta­tus after change.
4. Press
Note: The primary number will be dialed when you use
Speed Dialing and Quick Dialing features.
and scroll to
F
.
F
to decide it.
To Erase Numbers and Names
This feature erases the number already stored in the Phonebook.
Example: To erase the number 9 8 7 6 5 4 3 2 1 0
1 2 3 stored in the memory address 16.
1. Recall the number stored in the memory address 16.
F
2. Press “ERASE”.
3. Press The number is shown again.
4. Two seconds later the screen is changed.
5. To erase the number scroll to “YES”, otherwiseNO”, and press
and scroll to
F
F
.
F
.
36
Page 37
Secret Memory
To Store a Secret Number
This feature permits you to store a phone number that you want to keep secret in y our phonebook. The secret number can be accessed only by entering the security
code (see page 53).
Example: To store the phone n umber 1 2 3 4 5 6 7
8 9 0 in address 30 as a secret number.
CLR
MNO
6
.
STO
.
ABC
DEF
2
3
PQRS
F
F
TUV
7
8
STO
.
and scroll to
.
GHI
4
WXYZ
9
1. Press
2. Enter 1
JKL
5
OPER
0
3. Press
4. Press “SECRET”.
5. Press
F
6. Press
” on the number to be
to put a mark
secret.
7. Press
8. Enter
STO
DEF
3
.
OPER
0
F
to store it.
and press
To Recall a Secret Number
Example: To recall the number 1 2 3 4 5 6 7 8 9 0
stored in the address 30.
1. Use Phonebook Search Mode to recall a secret number.
37
Page 38
2. Press
F
.
3. Enter the four-digit secu-
F
rity code and press
.
Link Dialing
This feature permits you to link groups of numbers to be sent in sequence. The link ed numbers can be stored in memory. When dialed, the first group of numbers will be sent in digital signaling, and the rest of the numbers will be sent in Touch Tone group by group each time you press
To Store Linked Numbers in Phonebook
Linked Numbers can be stored using any of the proce­dures described under memory operations (at a spe­cific address, with a Name Tag, at the next vacant memory location or as secret). The only difference is, that a Link Mark = must be entered between the linked numbers. The link mark is entered using the key sequence You can store Linked Numbers with Link Marks = up to 40 digits for the address 01 to 90, and up to 80 digits for the address 91 to 99 in the phonebook.
31 digits or less 31 digits or less 31 digits or less
.
F
F
.
Up to 40 or 80 digits
L01 = =L02 L03
The example on the next page shows how to store a Linked number at a specific memory address.
1. Enter the first number.
F
F
2. Press
. A link mark “ = ” will be added
at the end of the number.
3. Enter the second number. If you wish to link addi­tional number(s), return to 2.
4. Press
STO STO
, then enter the memory address
(01 ~ 99).
38
Page 39
Example:
1. Enter
GHI
4
2. Press
3. Press
4. Enter
5. Press
6. Press
7. Enter
JKL
5
OPER
.
0
8.
Press
To link 3 numbers and store in Address 35.
PQRS
GHI
MNO
7
PQRS
7
9
F
.
F
.
1 2
F
.
F
.
1 2
MNO
6
7
STO STO
F
.
4
WXYZ
PQRS
.
ABC
ABC
DEF
6
3
DEF
.
3
DEF
GHI
3
4
TUV
WXYZ
8
9
DEF
JKL
3
5
Note: While entering a linked number, you ma y re view
all the parts of that number, even those already entered.
F
Press
F
, scroll to “VIEW TEL#” and press
. The link ed numbers you hav e just entered
will be displayed one by one each time y ou press
F
.
To Place Calls using Linked Numbers
Rcl
1. Press to call. (See Phonebook Recall on page 31.)
2. Press first number is dialed.
3. Press sent in Touch Tone signals. Succeeding num­bers can be sent sequentially by pressing
again.
, and select the linked number you w ant
. Then the indicator will light as the
. The second linked number will be
39
Page 40
Voice Activated Dialing (VAD)
With this feature, you can make a call from your phonebook by just saying the name. You can register, in your own voice, names for up to 20 numbers in your phonebook.
Voice Registration
Example: Store the telephone number 1 2 3 4 5 6
7 8 9 0, and register the name “Katie”.
1. Enter the telephone number (1 2 3 4 5 6 7 8 9 0).
2. Press
3. Press
4. After you hear the voice
5. After you hear the voice prompt, “Again”, repeat
6. If the registration is successful, you will hear the
7. Y our voice registr ation sta-
STO STO STO
F
.
prompt, “Name, please”, speak “Katie” into the microphone of the hand­set. Y ou will hear bac k “Katie” repeated from the handset.
the name “Katie”. You will hear “Katie” repeated from the handset again.
prompt “Entry Completed”.
tus is displayed.
.
8. And your phonebook sta­tus is displayed.
Notes: 1. Please register names with your normal tone
of voice, and in a quiet environment.
2. For better recognition, it is recommended that very similar sounding names should not be registered.
3. The maximum length of names that the phone will accept is 2 seconds.
4. The same person’s voice that was used to record the names must be used for dialing, otherwise the VAD feature may not work properly.
40
Page 41
Reviewing the Registered Name
Rcl
1. Press
to recall the number from the phonebook.
F
2. Press
3. Place the phone near your ear, and press
and scroll to “REPLAY”.
F
4. You will hear the registered name.
Note: Addresses with voice are marked with “V”.
Voice Activated Dialing
Example: Dial the number by speaking “Katie”.
VAD
1. Press and hold
2. Listen to the phone say “Name, please”, then speak into the microphone “Katie”.
3. You will hear from the phone, “Calling Katie”.
4. Katie’s number in the phonebook will be auto­matically dialed.
Notes: 1. If you hear “Did you say ‘Katie’ ?”, please
answer to it “Yes” or “No”.
2. When you use this feature through car kit option, it is recommended that you speak slightly louder for better recognition.
.
.
To Register a Name to a Number Stored in Memor y
Rcl
1. Press phonebook.
2. Press again.
3. Press
4. After the screen displays “PHONEBOOK OVER- WRITE”, press
5. You will have on the screen “VOICE DATA ENTRY”.
6. Press
tration on page 40.
Note: In case dual numbers or linked numbers are
stored in the phonebook, the primary number or the first number can be dialed using VAD.
to recall the number from the
F
, scroll to “MODIFY” and press
STO STO STO
F
and go to the step 4 of Voice Regis-
.
F
.
41
F
Page 42
To Delete the Registered Name
Rcl
1. Press
to recall the number from the
phonebook.
2. Press
F
, scroll to “ERASE” and press
again.
3. Scroll to “VOICE DATA” and press
F
.
4. You will have on the screen “VOICE DATA
F
ERASE”. Scroll to “YES” and press
.
Call History
This feature recalls outgoing Call History and incoming Caller ID numbers. This is convenient for redialing re­cently called numbers or for returning missed calls by using the stored Caller ID. (See Caller ID with Name on page 20.)
Call History Memories
Memory
OUTGOING
INCOMING
SCRATCHPAD
Last 10 numbers you dialed. Address 01 to 10.
Last 10 numbers you answered or missed. Address 01 to 10.
Last 3 numbers you wrote during calls. Address 01 to 03.
Description
F
You can access the memor y in two ways, Scroll and Shortcut.
By Scrolling
Rcl
1. Press
and scroll to
HISTORY”.
F
2. Press
and scroll to
the menu item you want.
F
3. Press
to select.
4. T o review the n umbers in memory , scroll with or .
5. After a number is displayed, it can be easily di­aled, by simply pressing
.
42
Page 43
Shortcut:
Rcl
• Press
VAD
to display the latest number in the
outgoing history memory.
Web
Rcl
• Press
to display the latest number in the
incoming history memory.
To Review Outgoing Call History
Example:
1. Press
To recall a number from Outgoing Histor y.
Rcl
VAD
. The most recent call is dis­played. Scroll with or to review other numbers.
2.
3. You can place a call by simply pressing .
When duplicate numbers are called, only the latest call is stored in the outgoing call history memory.
To Review Incoming Call History
Example: To recall a received Caller ID from
Memory Stack.
Web
Rcl
1. Press The most recent call is dis­played.
2. Press is shown, if available.
3. Press A name is shown, if avail­able in your phonebook.
4. You can place a call by simply pressing
.
. A time stamp
.
.
In the incoming call history , the calls are marked with “ or “ ”. Numbers with “ ” represent calls you missed, and numbers with “ ” represent calls that you answered. When duplicate numbers are received, only the latest call is stored in the incoming call history memory.
43
Page 44
To Review Scratch Pad
Example:
Rcl
1. Press
F
2. Scroll with
.
F
or to review other num-
bers.
3. You can place a call by simply pressing .
To Save a Number to Phonebook
The numbers of Call History and Scratch Pad Memory can be stored in your phonebook. You can add a name in the same way as “MODIFY”. See To Modify Num-
bers and Names on page 34.
Example: To save a received Caller ID to Phone-
book.
1. Recall a number.
F
2. Press “SAVE”.
and scroll to
F
3. Press
4. Press
5. Enter
.
STO STO
GHI
4
0
dress, and press
F
.
.
OPER
as an ad-
44
Page 45
WEB BROWSINGWEB BROWSING
When operating in the Digital mode, you can access vari­ous internet websites directly from your cellular phone. Please contact your Service Provider for details of the avail­able services. See W eb Browser Setup (F72) on page 73.
Web Access
1. Press and hold The cached information may be displayed.
2. To access the network, press and hold
indicator is on. Your phone will display your service provider’s website with a flashing .
3. Scroll the page by
4. Press
S1
the bottom line of the display.
5. To return to the previous page, press
6. To terminate the network access, press . The indicator will go out. You can still browse the
cached information.
7. Press
Web
. The Web Bro wser will start.
CLR
while
or .
S2
or
to select the menu option in
V
CLR
.
again to close the web browser.
Browser Menu
Rcl
Press browser’s local menu.
key while the browser is active to see the
1. Help: To get help informa-
tion.
2. Home: To get back to the Home page. Press and
CLR
hold
will do the same.
3. Mark Site: To store the current page in your book-
mark list.
4. GoTo URL: To input URL (Uniform Resource Lo-
cator), and access that page.
5. Show URL: To display the URL of the current
page.
6. Restart: To clear the cache memory in your
browser.
7. Phone.com: To display the
version of your browser.
8. Advanced: To use for security .
45
Page 46
Alpha Entry in Browser Mode
Alpha” mode will automatically be active when it is nec- essary to enter alphabet character such as URL.
Example:
ALPHA/alpha — Alphabet Mode
Press to move the cursor to left, and to right. To exit the Alphabet Mode, press
SYM Symbol Mode
By pressing tive. Scroll “SYM1” to “SYM4” by or , and press the corresponding digit key (1 to
NUM Numeric Mode
Press
S1
Alphabet Mode
F
to switch upper and lower cases . Press
S2
V
.
S1
, “SYM1” (symbol) mode will be ac-
S1 S1
to set “NUM” (numeric) mode . Press
again to reset to “Alpha” mode.
Key
1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ 0 OPER
VAD
Web
1 press
Blank
M / m
W / w
2 press
3 press
1
A / a D / d G / g
J / j
P / p
T / t
B / b
C / c E / e H / h K / k N / n
O / o
Q / q
U / u X / x
0
V / v
Y / y
.
@.-,_?/!$’%”(;):+
@
F / f
I / i
L / l
R / r
,
WXYZ
9
) to select.
4 press
/ 2 3 4 5 6
S / s
8
Z / z
?
5 press
:
7
9 !
Symbol Mode
1 SYM1 SYM2 SYM3 SYM4
.
@
;
~
2
3
4
5
6
7
8
9
!
?
,
-
(
)
#
:
/
$
&
%
+
<
>
=
[
]
_
{
}
`
ˆ
|
\
46
Page 47
MESSAGING FEATURESMESSAGING FEATURES
Your CDM-9000 Audiovox Cellular Telephone has been engineered to operate with the latest technology that will allow you to enjoy the benefit of Voice Mail Notification and Text Messages. Please note that operation of these features depends on the Cellular System and therefore may not be available in all areas.
Message Indicator
A message indicator shows you the current status as explained below.
You have new Text Messages or new Voice
Flashing
Steady
off
Mail Notification. You have Text Messages or Voice Mail
Notification, which you have seen already. Neither Text Message nor Voice Mail Notifi-
cation.
In addition to the Mail contains unreviewed messages , you will occasion­ally hear a short beep as a reminder.
indicator, whenever your Voice
Voice Mail
Voice Mail Notification
Y our cellular telephone notifies y ou when new messages are in your Voice Mail. When messages are left in your Voice Mail, the display flashes to alert you.
Normal Voice Mail Notification
When your phone is notified by the cellular system that there are messages in your Voice Mail, the following occurs.
1. The phone sounds a short beep tone.
2. The flashes to alert you. The display indicates “NEW MESSAGE” with animation.
3. The Phone’s Memory Stack is updated as to the number of unreview ed messages in your V oice Mail.
indicator at the upper right of the
indicator at the upper right of the display
47
Page 48
Voice Mail Notification with Mail Retrieval Service (MRS)
1. The phone sounds a short beep tone.
2. Press
to answer the incoming call, your phone will be connected to your Voice Message Service so that you may retrieve y our messages.
3. If you choose not to answer the incoming call, “Message Retrieval” will be stored in the stack for retrieval of your messages at a later time.
To Display the Number of Voice Mail Messages
Example:
1. Press . A mark “ ” is flashing, when a new mes­sage is available.
F
2. Press “VOICE”. The number of messages in your Voice Mail will be displayed.
3. If a Text Message is attached to the Voice Mail Notification, the Text Message can be reviewed by
4. Press or “ERASE” the notification you review ed.
5. Press
6. To erase the Voice Mail Notification, scroll to “YES”, otherwise “NO”, and press
to select
F
. Otherwise this step is skipped.
F
. Scroll to “QUIT
F
.
F
.
Voice Mail Dialing
You can store one set of linked numbers in a specially provided memory , and access these n umbers with one
touch of the “Voice Mail Access” key
48
V
.
Page 49
To Store the Voice Mail Access Number
Please see To Store Linked Numbers in Phonebook on page 38, and follow the steps 1 ~ 3 to make a set of linked numbers. Press
STO STO
V
F
to store. Up to 80 digits of linked numbers can be stored includ­ing link mark “ = ”. You can also add a Name Tag (up to 20 to 24 characters) with your voice mail number. (See
To Store a Name with Phone Number on page 27.)
To Call Your Voice Mail
1. Press and hold V . The first number will be dis­played and dialed.
2. Press V . The second number will be displayed and sent in Touch Tone™ signal.
3. The succeeding numbers can be sent sequentially
V
by pressing
.
To Review the Voice Mail Access Number
Rcl
1. Press Mode.
2. Press displayed.
3. Press maining linked numbers in
to select the Phonebook Address
V
. The first linked number in V will be
F
(one or more times) to display the re-
V
.
Text Messages (Short Message Service)
Your phone is able to receive and display Text Mes­sages of up to 255 characters long. The Text Message memory stack can store up to 30 messages. When an SMS message is received, the following occurs.
1. A short beep tone sounds.
2. The flashes to alert you. The display indicates “NEW MESSAGE” with animation.
3. The Text Message just re­ceived is stored in the Memory Stack. To review stored messages, see T o Review a Text Message on page 50.
4. If the Memory Stack is full, any new Text Messages will not be stored, and you will have the display:
indicator at the upper right of the display
49
Page 50
To Review a Text Message
T e xt messages are stored in the address 01 to 30 in the memory stack. The address 01 has the last message. Every message moves to the next address when a ne w message is stored.
Example: To display a Text Message stored in the
Memory Stack.
1. Press “TEXT”. You have now 10 Text Messages out of 30 memories. A mark “ flashing, when a new message is available.
2. Press Message is displayed. A longer message will be au­tomatically scrolled every 6 seconds.
3. Press seconds to review an op­tional information.
4. Press seconds. If a Callback Number is displayed, you can dial it by simply pressing
5. Press “QUIT” or “ERASE” for the message that you just re­viewed.
6. Press
and scroll to
F
. The first Text
F
or wait for 6
F
or wait for 6
F
and scroll
F
to select.
” is
.
7. To erase the Text Message, scroll to “YES”, oth-
F
erwise “NO”, and press
8. To review another message, scroll with
.
or
.
Note: New Text Messages are marked with “ ”. Text
Messages you have already reviewed are marked with “ ”.
50
Page 51
FUNCTION MENUFUNCTION MENU
To Access Function Menu
Various phone settings can be changed through Func­tion Menu to customize your phone’ s functions to fit your convenience. See Function Menu Tree in the follow- ing page. You can reach the Function you want to ac­cess in two ways; Scroll and Shortcut.
By Scrolling
1. Press Menu.
F
to enter Main
2. Scroll with
or key to the desired item in the Main Menu.
F
3. Press
to enter the
submenu.
4. Scroll with
or key to the desired item in the submenu.
F
5. Press
to enter the function.
By Shortcut
Each Function has its shortcut number for direct ac­cess. For e xa mple , t o en ter t he f unction “RING TYPE” (F32),
DEF
press
F
ABC
3
2
.
To Exit from Function Menu
• To return from a submenu to the main menu, press
Rcl
.
• To exit from Function Menu, press
Notes: 1. A mark “ ” at the right in a menu prompt
you that you can see its detailed items by
F
pressing
.
2. A mark “ ” shows the current setting of the function.
.
51
Page 52
Function Menu Tree
Main Menu Submenu Branch
1: LOCK 1: KEY LOCK (F11)
2: LOCK (F12) 3: AUTO LOCK (F13) 4: LOCK CODE (F14)
2: DISPLAY 1: MY NUMBER (F21)
2: BACKLIGHT (F22) 3: HYPHEN (F23) 4: SMS LINES (F24) 5: CONTRAST (F25) 6: VERSION (F26) 7: LAST SID (F27) 8: PRL ID (F28)
3: TONES 1: RING VOL. (F31)
2: RING TYPE (F32) 3: KEY VOL. (F33) 4: MUTE (F34) 5: DTMF SEND (F35) 6: SETTINGS (F36)
4: TIMES 1: TIMERS (F41)
2: CLOCK (F42) 3: ADJUST (F43) 4: ALARM (F44) 5: C.D TIMER (F45)
5: SYSTEM 1: A/B SW. (F51)
2: NAM CHG. (F52) 3: ANALOG (F53) 4: SETTINGS (F54)
1: STANDBY 2: IN-USE
1: KEY TONE 2: BEEP ALT. 3: V OICEMAIL 4: TEXT MSG. 5: CALLER ID 6: SERVICE 7: PRIVACY 8: MINUTE 9: LOW BATT.
1: LAST CALL 2: OUTGOING 3: ALL CALLS 4: LIFETIME 5: WEB T O TAL
1: NAM NAME 2: AUTO NAM 3: RETRY 4: PRIVACY 5: AUTO PIN 6: PIN CODE
SECURITY
6:
7:
DAT A/FAX
8: VIBRA T OR
0: OTHER 1: QUICK DIAL (F01)
1: RESTRICT (F61) 2: EMER. # (F62) 3: [1] EMER. (F63) 4: SEC. CODE (F64) 5: RESET (F65)
1: MODE (F71) 2: WEB SETUP (F72) 3: BROWSER (F73)
2: AUTO ANS. (F02) 3: ABSENCE (F03) 4: ABS. TIMER (F04)
52
1: TIMERS 2: PHONEBOOK 3: HISTORY 4: TXT/V OICE 5: SETTINGS
1: LOCK 2: BACKLIGHT 3: IDLE TIMER 4: WEB LINK A 5: WEB LINK B 6: USER NAME 7: PASSWORD 8: LINK CHG.
Page 53
Lock Features
Security Code and Unlock Code
Your phone is equipped with the Security Code and the Unlock Code to access various security features. You may change the preset codes for added protection.
Code
Security Code
Unlock Code
When “SECURITY CODE:” is displayed, you need to enter your four-digit security code. See To Change the Security Code (F64) on page 71. See To Change the Unlock Code (F14) on page 54.
Keypad Lock (F11)
This mode is useful for prev enting inadvertent pressing of keys. (For example, when the phone is in a purse or pocket.) With this feature on, the following functions are still a vail­able.
• Incoming calls can be answered with
• Programmed emergency numbers can be called.
When this feature is on, the following functions are not available.
• Automatic Answering
• Any Key Answering
• OneTouch Emergency Call
• Quick Dialing
• Turning off the phone by
To Activate/Deactivate this Feature:
1. Press
2. Press
Preset
1234
To access Secret Number, to set Call
Description
Restriction, etc.
1234
To unlock the Phone
(Except for OneTouch Emergency Call.)
.
F
1 1 to activate “Keypad Lock” mode.
F
1 1 again to deactivate.
.
53
Page 54
Phone Lock (F12)
This mode is useful to prevent unauthorized use of the phone. With this feature on, the following functions are still available.
• Incoming calls can be answered with
.
• Any Key Answering
• Programmed Emergency Call
• OneTouch Emergency Call
• Turning off the phone by
. The following functions are not a vailab le when this f ea­ture is on.
• Automatic Answering
• Quick Dialing
To Activate:
1 2
ABC
to
1. Press
F
activate “Phone Lock” mode.
Note: The phone will remain locked even if the power
is turned off.
Automatic Phone Lock (F13)
If you activate this f eature, the phone will automatically go into the phone lock condition after it is turned off. (See Phone Lock (F12) above.) When you turn the phone on, you must enter the four-digit unlock code before it operates. (See To Unlock the Phone below.)
F
1. Press
1
2. You can turn this feature on/off by
3. Press
F
to set.
DEF
3
.
or .
To Unlock the Phone
1. Enter the four-digit unlock code.
2. The “Phone Lock” indicator will go out.
To Change the Unlock Code (F14)
1. Press
F
1
2. Enter the four-digit security code and press
3. The current unlock code will be displayed. Enter a new four-digit unlock
4. code and press
GHI
.
4
F
.
54
F
.
Loading...