DXG Technology DXG-202V User Manual

DXG-202V

User's Manual

Contents

1.Attention…………………………………………………………..…….…..……4

Safety Precautions…………………………………………..……………..….………….…..4
Before Using Your Digtial Video Camera………………….…..…..……….………………...4
Operational Precautions...…………………….…………….…………….………...…………5
Package Contents………………………….………….…………….…………….…..…...…..5

2.Getting to Know Your Digital Video Camera………..………..……....…….6

Digital Video Camera Controls….…….……...…………. ……………….………….…….6

Top View………………………………………………..……....….…………...…………....6

Left Side View………………………………………………....….…………...……………6

Right Side View………………………………………………....….………………………6

Rear View………………………………………………....….…………...…………………7

3.Getting Started………..……………..……..…..……………………..……..….8

Preparing Your Digital Video Camera….……...………...…………. …...……………….8

4.Start Using Your Digital Video Camera…………….……..………...…....…9

Function Tree………………….……………….……………….…………….……..…….…..9
Setup Mode…………………………………………….………….……………………….….10

Movie Mode………………………..…….………………….…………….…………..……....11

Status Identifier……………………..………………………....….…………...………….. 11

Recording Video …………...….………….….…………….….…………….….………….12

Recording Video with Self-Timer……………….….…….……….….……..…….…….....12

Voice modes…………………………………………………………………………….…….13

Status Identifier……...……………….………………………………………..….…….…..13
Record Voice………………………………………………………………………………...13

Capture modes…………………………………………………………………………….…14

Status Identifier……………….……………………. …………………………….…….….15
Shooting Photos…………………………………………………….…………………...….15

To take Close-up pictures……………….………….………….…………………….….....15

To take portrait and distant pictures………………...…………………………….……....15

Digital Zoom………………….………….……………….………….……..…………….....15

Snapshot Menu……………………………….………. ……………………….….…...…..16
Flash Function…………...……………….….……………….……………….…..….…….19

Photo/Movie/Voice Playback Mode …….….……………….…….…....…………...……19

Status Identifier ………………………….….…………………………….…..…………....19

Image Playback………….….…………………………………………….…………….…..19
Movie Playback…………………………………….….……...………………..…….……..20
Voice Playback……………………………….….……………...…………………………..20

1

Album Function……………………………….….…………………….……....…….……..21

Playback Menu………………………………………………………………...….………...21

5.Connecting Your Computer….…... ..….….....….…...…….…......…......28

Using the Digital Video Camera as a Web camera….…….….…...….…….. ….…….…..28
Using the Digital Video C amer a as a M ass Storage drive…..…..…..…..…. …..…..……28
Connecting to Your TV/VCR……………………………………..………….………..….…..29
System Requirements……………….……………………………………………….…...…..30

6.Installing Drivers… …………………….. ……………………….. ………...31

7.Installing the PC Applications…..………...………...………. .. ……...……32

Appendix: Specifications…………………………….…...….....……...……..34

2

1. Attention

Please read through this manual carefully before using the Digital Video Camera
and follow the instructions to avoid damage caused by improper operation.

Safty Precautions

● The software CD-ROM packaged with the Digital Video Camera is for PC only.
Do not attempt to play the CD-ROM on a stereo or CD player.

● This Digital Video Camera is a precision electronic device. Do not attempt to
service this Digital Video Camera yourself. Opening or removing covers may
expose you to dangerous voltage points or other risks.
Digital Video Camera to direct sunlight to avoid causing a fire.

Before Using Your Digital Video Camera

● Try to take some pictures before using it for formal recording. Before taking
pictures with this Digital Video Camera for any important occasion (such as a
wedding ceremony or an overseas trip), test the Digital Video Camera
beforehand to ensure that it functions well. Any additional loss caused by the
malfunctioning of this product (such as costs of photography or any loss of
benefit generated by the photography) is not the responsibility of our company
and no compensation will be given for it.

● Copyright information
Unless agreed to by the rightful owner, all the pictures taken with this Digital
Video Camera must not be used in violation of copyright law. Moreover, when
"No Photography" restrictions are in place, you ma y not record any live
performance, improvisation or exhibit, even if it is for personal purposes. Any
transfer of pictures and data or use of memory card must be conducted under
the constraints of copyright law.

● Notes on the LCD (Liquid Crystal Display) monitor fluid

1. Skin Contact:
Please wipe dry the skin with a cloth and wash flush with large amounts of
water .

2. Eye Contact:
Please immediately rinse with fresh w ater for at least 15 minutes, then
consult with a doctor to receive treatment as soon as possible.

3. Swallowing/Ingestion:
Please rinse the mouth with water, drink large amount of water and receive
medical treatment as soon as possible.

3

Do not expose this

Operational Precautions

A

This product consists of intricate electrical parts. T o ensure normal photography ,
do not drop or hit the camera when taking pictures.

● Avoid using or placing the Digital Video Camera in the following locations:

1. Damp and dusty places.

2. Sealed vehicles or places exposed to direct sunlight or places subject to
extremely high temperatures.

3. High vibration.

4. Smoke, fumes or steam.

5. Magnetic fields.

6. Rain, snow or other precipitations.

● Do not open the battery cover when the power is on.

● If water has entered the camera, immediately turn the power off and remove

the batteries.

● How to maintain your camera:

1. If the lens or LCD monitor surface is dirty, please use lens brush or soft cloth

to wipe them clean instead of to uching them with your fingers.

2. Do not use any solid object to hit the Digital Video Camera to avoid

scratching the lens, or LCD monitor surface.

3. Do not use any detergent or volatile solution, which will subject the Digital

Video Camera case and paint to damage or distortion. Use soft cloth only.

Package Contents

Please check if the following item s are in the package when purchasing this
product.

CD-ROM

(Driver & Application

Software)

Pouch Wrist

2 x ”AA”

lkaline

Batteries

● CD-ROM
(Driver & Application

Software)

● Pouch

● Wrist Strap

● 2 x “AA” Alkaline Batteries

● USB Cable

● AV OUT Cable

● User's Manual

USB Cable AV OUT Cable User's Manual

4

2. Familiarization: Getting to Know Your Camera

Digital Video Camera Controls

Front Side View

Shutter

Self-timer LED

Flash

Lens

Microphone

Left Side View

Set Button-.

Mode Switch

1. Capture Mode

2. Movie Mode

3. Voice Mode

Battery Cover and SD Card slot

Right Side View

Macro Switch.

Terminal Compartment (Ports)

Audio/Video Output Port

USB Port

5

Top View

Speaker

Color Liquid Crystal Display
Flash LED

Power LED

Power Button

Enter Button

Playback Button

Display Button

Menu Button

Battery power level

Full battery power
Medium battery power
Low battery power

Battery exhausted

6

3.Getting Started

Preparing Your Digital Video Camera

●Step 1 Insert two "AA" batteries into the battery compartment.

●Step 2 When inserting SD/MMC memory card, follow the icon shown in the

Then, push the memory card all the way into the memory compartment and
close the battery door, push the battery door down and then slide it closed.

●Step 3 Attach the wrist strap to the strap holder in the side of the Digital

compartment to insert or remove the card push-and-pull.

Note: When memory card is inserted, the internal 16MB flash memory is
disabled.

Video Camera as illustrated in the picture below.

7

4.

Start Using Your Digital Video Camera

●Step 1 Press the Power button to turn on the Digital Video Camera. The Power

●Step 2 The LCD Display will turn on.

Note: The LCD Display turns off automatically if you do not operate it for 30
seconds. The camera turns off automatically if you do not operate it for over
60 seconds.

LED will light up.

Function Tree

8

Setup Mode

Press the Set button to enter the setup menu.

You can configure the basic settings:

1. Beep--Sound On/Off.

2. Date/Time--Date & time settings.

3. Language--Language settings.

4. Format--Format the internal memory or memory cards.

5. Default--Reset to preliminary settings.

6. TV--TV output format setting: NTSC/PAL

7. Frequency--Fluorescent frequency: 50Hz/60Hz

Date/Time setting

●Step 1. Press to move to the Date/Time option.

●Step 2. Press Enter button to bring up the menu.

●Step 3. Press to adjust Date/Time; press to select year, month,

●Step 4. Press Enter button to save your settings and then exit.

day, hour or minute.

9

Formatting the Memory Card

Format your SD/MMC memory card before using it to store pictures.

●Step 1. Press to move down to the Format option.

●Step 2. Press Enter button to bring up the"Cancel/OK" Menu.

●Step 3. To format the memory card, select “ ok” on th e screen an d then press

●Step 4. The Digital Video Camera then begins formatting the memory card.

●Step 5. Upon formatting, memory card files will be deleted: Format OK

the Enter button. You will hear a ring sound when you press it.

Wait for the formatting process to finish.

Movie Mode

Slide the Mode switch to select Movie Mode

Status Identifier

Movie Mode Indicator

Movie Recording Time
Image Number

Battery Status Indicator

Card Indicator

10

Recording Video

Video is recorded at a rate of approximately 15 frames per second in AVI
format.

●Step 1. Press the Shutter button once to start recording video. You will see

●Step 2 While recording, a red icon blinks on the upper left side of the LCD

●Step 3 To stop recording, press the Shutter button again.

live views of the subjects or sc enes you are recording on the LCD.

Display and the record time increments. The icon stops blinking and
becomes green after you terminate the recording process.

Recording Video with Self-timer

To use the Self- Timer fun ction for recording video cli ps, press the Menu button t o
switch the timer on and off. With the timer set to on, the icon will appear on
center of LCD panel.

Image quality setting

Same as Capture Mode (p.17).

Voice mode

You can record voice sounds and music just as you can with any recorder . The file
format standard it uses is Microsoft WAV (.wav). These .wav files can be played
on the Digital Video Camera, your PC or on a standard television. First connect

11

the camera must be connected to the display output device (monitor or TV) with
the AV cable.

Status Identifier

Voic e Icon

Record Length

Image Number
Card Indicator

Battery Indicator

Record Voice

Dial the Mode Switch to Voice

●Step 1. Press the Shutter button once to start recording voice.

●Step 2. While you are recording, an red icon blinks on the upper

Step 3. Press the Shutter button to stop the voice recording.
The voice playback function is in Playback mode.

left side of the LCD Display. The icon turn to green after you
terminate the recording process. The recording time is displayed
as you shoot.

12

Capture Mode

Turn the Mode Switch to Capture Mode

Status Identifier

Date Stamp (Default is not displayed).

Battery Status Indi cator:

(Full) Half Low Empty
Memory Card Status: Card inside Or Not.
Image Number
Self-timer Indicator
EV Level

White Balance: Auto, Sunny, Tungsten, Fluorescent.
Image Quality: Fine, Normal, Basic.
Image Size: 4M (2304x1728), 3M (2048x1536),

EV Lock Indicator (Press Shutter button half way).
Zoom Lever: (Normal), (4.0x Zoom).
Macro Indicator
Capture Mode Indicator
Flash Mode: (OFF), (Auto),

Warnings:

Card Lock: this symbol blinks if the Shutter button is pressed with the

memory card locked.

Memory Full, this symbol shows up blinking when the internal memory or

the inserted memory card is full.

2M (1600x1200), VGA (640x480).

13

Shooting Photos

Taking pictures with your Digital Video Camera is a snap. Just point and shoot!

● Step 1. Turn on camera.

● Step 2. Frame the subject in the LCD Display .

● Step 3. Press the Shutter button to take a picture.

The picture will remain on the display until it is stored in the memory . When the
LCD Display resumes, you can starting setting up your next shot.

Close-up pictures

● Step 1. Push the Macro switch downwards to

● Step 2. Position the lens between

select the Macro mode . The Macro
indicator appears on the LCD.

25~30cm distance (10-12”)

Portrait and distance pictures

● Step 1. Push the Macro switch upward for normal mode. The icon on the
LCD panel will disappear, allowing you to take pictures of people or sceneries
from 1.2m~infinity.

● Step 2. To take pictures, follow the steps in the "Shooting Photos"
section.

Digital Zoom

Press to enter Zoom in/Zoom out functions. The framed image can be
zoomed between 1.0X ~4.0X.

Snapshot Menu

14

In Capture mode, press Menu button to enter Snapshot Menu:

White Balance Setting

● Step 1. Use to select WB on the menu bar.

● Step 2. Press the Enter button to enter White Balance setting menu.

● Step 3. You can use to se lect Auto, Sunny, Tungsten, and

● Step 4. Press the Enter button to confirm your selection, or press Menu

Image Size Setting

● Step 1. Use to select the image size icon on menu bar.

● Step 2. Press the Enter button to enter Image Size setting menu.

●Step 3 You can use to select:

● Step 4. Press the Enter button to confirm your selection. Press the Menu

button to cancel it.

Fluorescent.

button to cancel it.

VGA: 640 x 480
2M: 1600 x 1200
3M: 2048 x 1536 pixels
4M: 2304 x 1728 pixels

15

Image Quality Setting

● Step 1. Use to select on the menu bar.

● Step 2. Press the Enter button to enter the Image Quality menu.

● Step 3 Use to select Fine, Normal or Basic

● Step 4 Press Enter button to confirm your selection, or press Menu button to

Exposure Value Setting

● Step 1. Use to select EV on the menu bar.

● Step 2. Press Enter button to enter Exposure Value menu.

● Step 3 Y ou can use to set -2EV, -1.5EV, -1EV, -0.5EV, 0EV, +0.5EV,

● Step 4 Press Enter button to confirm your selection, or press Menu button to

Self-Timer Setting

● Step 1 Use to select on the menu bar.

● Step 2 Press Enter button to enter Self-Timer setting menu.

cancel it.

+1EV, +1.5EV,and +2EV.

cancel it.

16

● Step 3 You can use to select ON, Off.

● Step 4 Press Enter button to confirm your selection, or press Menu button to

To Take a picture with self-timer

With the Self-timer function set to “On,” the Self-timer icon appears at the
center of the LCD display.

When the Shutter button is pressed, the self-timer icon disappears while a
number appears, counting down from 10, beeping while the self-timer LED
blinks.

cancel it.

After the countdown reaches zero, the Digital Video Camera will take a
picture.

Date Stamp setting

● Step 1. Use to move to on the menu.

● Step 2. Press the Enter button to enter Date Stamp setting menu.

17

● Step 3. You can use

● Step 4. Press the Enter button to confirm your selection, or press the Menu

button to cancel it.

Note: After setting the date stamp on, the date will display on the LCD panel,
and dates will be stamped on captured pictures.

to select ON, Off.

Flash

The Flash function is active only in Capture Mode. The Flash has two

statuses. Pressing the Right arrow button can sequence it into Auto and OFF
status.

Off Auto

Right button

Photo/Movie/Voice Playback Mode

Press the Playback button for Playback Mode

Status Identifier Image Number.

Image Total.

Movie File Indicator.
Movie Play Length

Locking Indicator

Battery Indicator

18

Image Playback

Press to play ba ck the previous image or the next image.
Press the Enter button to enter the image zoom modes
Press the Up button to zoom in on the image
Press the Down button to zoom out from the image
In this mode, press the menu button for pan modes

In this mode, you can press any of the following [ ]、[ ]、[ ]、[ ]
to preview the partial images.

Press the Enter button to quit the zoom modes or pan modes.

Movie Playback

When it comes to movie fil e s, the movie indicator
appears on the upper-left screen corner. Press
the Enter button to start playing the movie. Press the
Enter button to stop playing the movie.

In movie playback you can press the Up button or
Down button to adjust volume. The volume
indicator will appear on lower-right corner of the screen.
Press the Menu button to pause.

19

Voice playback

Voice files are indiciated by a voice icon. Press the Enter button to start
playing the voice file. Press the Menu button to pause play. Press Enter
button to stop playing back voice.

During voice playback, press the [ ] 、[ ] button to adjust volume and then the
volume appears on left side of the screen. Press [ ]、[ ] button to adjust
the play time.

Album Function

● Step 1. Enter Playback Mode.

● Step 2. Press Left button to enter 3-frame Album function , which sh ows

● Step 3. Press the Left button again to enter the 3x3 Album, which

● Step 4. Press ENTER to play back the selected image full screen .

3 images per page with a mid-size preview window. Use to
change previewing images. (Pres ENTER to return to Playback Mode
and display selected images in full screen.)

supports to playback of 9 images on a page, then use
image.

to select

20

Playback Menu

Deleting Photos

You can choose to delete a single photo or all the photos stored in the Digital
Video Camera.

Deleting a Single Photo

● Step 1. Make sure that the Digital Video Camera is in playback mode.
Example: Move to the picture which is going to be deleted.

● Step 2. Press the Menu button to enter the Playback Menu and then move

Press the Menu button at this point the screen to return to step 1.

● Step 3. Press the Enter button to bring up Delete menu: Delete One and

If press Menu button, the screen will return to step 2.

● Step 4. Press the Enter button to confirm Delete O ne, then bring up current

If you press the Menu button, the screen will return to step 2.

to DEL with

Delete All.

picture with Delete menu: Cancel and Photo Number.

21

● Step 5. Press Enter to confirm your
deletions. The image shown on the display
will then be deleted and the previous image
comes up. If you press the Menu button, the screen
will return to step 2.

● Step 6. Select Cancel to stop deleting operation

and go back to the Playback Menu.

Deleting All Photos

You may also choose to delete all t he photos if the memory is already full and you
want to free up space to take more photos. But before you remove all photos,
remember to transfer them to your computer for safekeeping.

●Step 1 Make sure that the Digital Video Camera is in playback mode.

●Step 2 Press the Menu button to enter Playback Menu.

If press Menu button, the screen will return to step 1.

● Step 3. Press the Enter button to bring up Delete menu: Delete One and

● Step 4 Press to select the Delete All option on the menu screen.

If press Menu button, the screen will return to step 2.

Delete All, If press Menu button, the screen will return to step 2.

22

● Step 5 Press Enter button to confirm Delete All, then bring up current

picture with Delete menu: Cancel and Delete All.

● Step 6 Press to select the Delete All option on the menu screen, and

then press Enter button to confirm the erasing operation again.

If you change your mind and do not want to continue deleting all the pictures,
press to select Cancel on the menu screen. Then pr ess th e Enter button.
All your pictures will be retained.

● Step 7 After all the pictures ha ve been del eted, there is a message showin g:

No picture

Image protection

You can choose to protect specific photos to prevent accidental deletion.

● Step 1. Press the Menu button to enter Playback Menu.

If you press the Menu button, the screen will return to step 1.

● Step 2. Use to select

23

● Step 3. Press Enter button to bring up Protect Menu.

If press Menu button, the screen will return to step 3.

● Step 4. Press to select one image for protection.

● Step 5. Press the Enter button to protect the current image. The lock icon

will appear on the top right corner of the image that you selected. This

means the image has been protected.

●Step 6 If the current image has already been protect ed, you can press the

Enter button to unprotect it, and then icon will disappear from

the right top corner of the image. Thi s means th e image p rotection
had been disabled.

If press Menu button, the screen will return to step 3.

Slide Show

You can slide show all pictures previously taken with the Digital Video Camera.

● Step 1. Use to move to

● Step 2. Press Enter button to bring up Slide Show Menu: Cancel and

Start.
If you press the Menu button, the screen will return to step 1.

24

● Step 3. Press to select the Start on the menu screen, and then pres s

Enter button to slide show all of your pictures.

● Step 4. Press the Enter button to stop slide show.

DPOF Function

Selecting the DPOF option in Playback Menu can directly send your selected
photo to the compatible printers that read DPOF (Digital Print Order Format)
files.

● Set All Pictures to DPOF file

● Step 1. Press the Menu button to enter Playback Menu.

If you press the Menu button, the screen will return to step 1.

● Step 2. Use t to move to DPOF

If you press the Menu button, the screen will return to step 1.

25

● Step 3. Press the Enter button to bring up DPOF Menu:

If you press the Menu button, the screen will return to step 2.

● Step 4. Press

You can reset all DPOF pictures by select Reset All and then press Enter Button.

Set Single Picture to DPOF file

● Step 1. Press the Menu button to enter Playback Menu.

If you press the Menu button, the screen will return to step 1.

● Step 2. Use

If you press the Menu button, the screen will return to step 1.

Set All and Set One.

Enter button to set all of your pictures, which would indicate print

number 1 only, to DPOF files unless specific picture marked from
following Set Single Picture process.

Note: All pictures which have not been set to DPOF file, will be set to DPOF
file, and print number 1.

to select Set All on the menu screen, and th en pres s t h e

to move to DPOF

● Step 3. Press the Enter button to bring up the DPOF Menu: Set All and Set

If you press the Menu button, the screen will return to step 3.

One.

26

● Step 4. Press

then press Enter button to enter menu for setting single picture to
DPOF file.

to select Set One option on the menu screen, and

● Step 5. Press to select single picture, use to adjust print

● Step 6. After setting a single picture to DPOF file, press the Enter button to

number, number zero means this picture is not set in DPOF file.

return to Step 3.

27

5.

Connecting to Your Computer

You will need to connect the Digital Video Camera to your computer's USB port to
transfer photos into your computer. This section shows how you can connect the
Digital Video Camera to your computer.

First, you must install the Digital Video Camera Driver from the software CD-ROM
before connecting to ensure yo ur computer functi ons properly with USB . See the
section "Installing Software" for details on how to install the driver.

Using the Digital Video Camera as a Web camera or as a Mass
Storage Drive

When you connect the Digital Video Camera to your computer, you can use it as
a Web camera or as a Mass Storage drive. Y ou can then join in video conferencing
sessions on the Internet. You need to install the Digital Video Camera Driver and
required application softwares from the software CD-ROM before you can start
using it as a Web camera. See the section "Installing Software" for installation
instructions.

Using the Digital Video Camer a as a Web camera lets you ca ptu re vid eo di rectly
into your computer for later editing or enhancing your videos. See the section
"Installing Software" for installation instructions.

● Step 1. Make sure the Digital Video Camera has two ”AA”

● Step 2. Connect the smaller end of the USB

Note: Make sure to gently plug the USB cable in the right direction to avoid

● Step 3 Connect the other end

The Digital Video Camera’s LCD
Panel will turn on and enter

PC Connection Menu.

batteries in the compartment.

cable into the USB port of your Digital
Digital Video Camera.

possible damage to USB connector.

of the USB cable to the
USB port located on the
back of your computer.

28

● Step 4 Press to se lect Mass Storage Drive or PC Camera option on
the menu screen, and then press Enter button to enter menu for Using the
Digital Video Camera as a Web camera or a Mass Storage drive.

Connecting to Your TV/VCR

Connect your Digital Video Camera to a television if you want to have a larger
view of your photos.

● Step 1. Connect the black colored plug of the Audio/ Video output cable into

● Step 2. Connect the other end of the audio (the white plug) and video (the

● Step 3. On your television, select the channel for auxiliary Audio/Video

input.

the Audio/Video out port in the Terminal Comp artment on the l eft side
of the Digital Video Camera.

yellow plug) output cable to the Audio-in and Video-in plug on your
TV/VCR.

Note: Locate the Audio/Video ports on your individual TV/VCR and insert

the video output connector into the Video port.

Note: Channels may vary by manufacturer; refer to your V CR's operating

manual for specific channel to use.

29

System Requirements

Although you can get by with the following minimum system requirements and
use the Digital Video Camera, we recommend that you use a computer system
that exceeds the minimum requirements in order to utilize the Digital Video
Camera at its optimum effi ciency. The minimum system requirements for the
Digital Video Camera are as follows:

System (PC) Requirements

OS Microsoft Windows 98SE/Me/2000/XP

CPU Intel Pentium 166MHz or higher

Memory Minimum 32 MB memory or above

CD-ROM 4X or above

HDD 10 MB free disk space (minimum)

Others One standard USB 1.1 port

Note: Before playing Video Clips (*.AVI file), make sure your PC has

DirectX8.0 or higher and a sound card.

30

6.

Installing Software

You can use the PC Camera and Mass Storage functions of the camera via PC.
To install the camera driver:

● Step 1. Insert the software CD-ROM supplied with the package into the

● Step 2. The Auto-run program will be

● Step 3. Click on Install Driver, and the following screen will appear:

● Step 4. Press Next to continue the setup program. After the camera driver

CD-ROM drive.

executed and the welcome
screen appears: (If your CD-ROM
drive doesn't support the auto-run
function. Please double press on the
"My Computer" icon on the
desktop. Double press the CD-ROM
drive icon and press the
InstallMgr.exe file in the root
directory.

installs successfully, a message will appear on the screen:

● Step 5. Press Finish to restart the computer and finish the driver

installation.

31

7. Installing the Applications for PC

Install Arcsoft Software (Example: Arcsoft Photo Impression)

●Step 1. Insert the software CD-ROM supplied with the package into the

● Step 2 The Auto-run program will

(If your CD-ROM drive doesn't support the
auto-run function, please double click on the
"My Computer" icon on the desktop. Double
click the CD-ROM drive icon, then click the
InstallMgr.exe file in the root directory.

● Step 3. Click Arcsoft PhotoImpression
to install, and the screen will appear as
follows:

● Step 4 Select the language for
installation. Click Enter button to confirm.

● Step 5 You will see the Welcome screen. Click Next to continue.

● Step 6 Enter Software License Agreement window. Click Yes to continue

CD-ROM drive.

execute and the welcome
screen appears:

installation.

●Step 7 Please follow the Wizard instructions to select a destination folder and

components you need.

32

●Step 8 Please select the program folder you want to install.

●Step 9 When the installation is complete, the window below will appear.

Press Finish to end the installation.

33

Appendix: Camera Specifications

● Lens: f=9.6 mm

● Image Sensor : 2.0 mega pixel CMOS sensor

● Focus: F/2.8

● Sensitivity: ISO 100

● White Balance: Auto, Sunny, Tungsten, Fluorescent.

● Shutter: Electrical

● Shutter Speed : 1/4 sec. ~ 1/2000 sec.

● Storage Media: 16MB Internal Flash Memory and SD/MMC Card Slot

● Image File Format: JPEG for Still Image; AVI for Motion Image

● Image Resolution:

2304x1728 (Firmware Interpolation)
2048 x 1536 (Firmware Interpolation)
1600 x 1200
640 x 480

● Digital Zoom: 10-Step 4X Digital Zoom

● Focal Range: Standard: 1.2m ~ Infinity

● Self-timer: 10 sec. delay

● PC-CAM Mode : 20～30 fps. (320 x 240) ;15~25 fps. (640 x 480)

● Flash Mode: Auto,Off

● AV-OUT: NTSC/PAL options

● PC Connectio: USB (Ver. 1.1)

● Movie File: Recording approx. 120 s ec. conti nuous mov ie file with 320 x 240

format (16MB internal memory), the movie length may vary according to the
Quality setting,and extends if there is a memory card inserted.

● Recordable Image Numbers (16MB):

640X480
Fine 85 15 10 5

Norma

16MB

l
Basic 180 30 25 20

● Power Supply: 2 x “AA” alkaline Batteries or supports CRV-3.

● Dimensions: 93 x 56 x 38 mm

● Weight: About 120g ( batteries excluded)

(supports max. 512MB card)

Macro: 25 ~ 30cm

1600X12
00

130 25 20 15

2048X15
36

2304X172
8

34