DX Engineering DXE-SO239BKT-1 Instructions manual

SO-239 Bracket

DXE-SO239BKT-1

DXE-SO239BKT-1-INS Rev 1

For those special projects when you need to mount an SO-239, the DX Engineering DXE-SO239BKT-1
custom made aluminum SO-239 Bracket is just what you need!

You can mount a variety of SO-239 connectors using this special laser cut aluminum bracket. Either full round
or "D" type SO-239s can be mounted easily.

Four mounting holes provide varied bracket mounting possibilities that will make your project quick and easy.

Optional Suggested Items

SO-239, Chassis Mount Socket, Silver Plating, PTFE Insulation - DXE-112-KIT

Chassis mount SO-239 with Silver plating and PTFE insulation for high power situations. Packaged with the correct stainless bolts, flat
washers, star washers and Nyloc locking nuts.

 Silver plated, PTFE insulated, Stainless steel hardware, Nyloc nuts

Bulkhead Fitting, SO-239 Socket, Silver Plating, PTFE Insulation - DXE-363-SST

This hi-quality bulkhead connector uses silver plated outer and inner conductors and a PTFE insulator. The connector has very low loss and
high electrical break down. It comes with two nuts to secure the connector to our radial plate or other flat surface. Perfect for use with the
DX Engineering Radial Plate (DXE-RADP-1P) it ensures the radial ground system, the antenna ground and the feedline shield are
common. It can also be used in other coaxial applications where the male ends (PL-259) of 2 coax cables need to be connected, such as
when joining two pieces of coax together. Don't forget to waterproof coaxial connections.

 Silver plated, PTFE insulated, Very low loss, High electrical break down, 2 in. long

SO-239 Chassis Mount "D" Style, Silver Plating, PTFE Insulation - DXE-SO239D-1

This hi-quality SO-239 "D" style connector uses silver plated outer and inner conductors and a PTFE insulator. The connector has
very low loss and high electrical break down. It comes with a mounting nut, star washer and shield connection washer to secure the
connector to our SO-239 Mounting Bracket or other "D" hole SO-239 mounting.

DXE-1023-2 - Type N Double Female Bulkhead Adapter

Body Silver Plated
Center Pin Gold Plated Dielectric PTFE
Two per package

Tool Kit for SO-239/Bulkhead Connector Installation - DXE-T001

Versatile tool kit to aid in installation of chassis or bulkhead mount SO-239 coax connectors. Includes a special Stainless
Steel 3/4" semi-box wrench with pass-through for coaxial cable - perfect for the tightening large nut used to mount
bulkhead connectors. The other end is a 3/16" box wrench for tightening mounting nuts with SO-239 hardware. Also

included is a multipurpose 6-in-1 screwdriver/nutdriver tool featuring two Phillips heads, two flat heads, a 1/4 in. nut driver
and a 5/16 in. nut driver. Bits store in the handle of screwdriver for easy mobility

Black Vinyl Cap for SO-239, (0.612 in. O.D.) 20 Pack, (SO-239 Protector) - DXE-VC-0612

Utilize this cap to protect unused SO-239 connectors. Great for Antenna Switches, Phasing Controllers, Mobile Antennas, and
Transceivers. These black vinyl caps are also designed to fit over the end of tubing or pipe to keep moisture out and are perfect for
sealing antenna elements. Made from a strong UV rated material, they will withstand the abuse of nature and keep moisture, dust or
other contamination out of your connectors.

 Black Vinyl Material - UV Rated
 Great for outside installation
 Will stretch to fit securely over an SO-239 or a nominal 0.612 in. OD Tube
 Length: 1/2 in.
 20 pieces in a pack

©DX Engineering 2019

1200 Southeast Ave. - Tallmadge, OH 44278 USA

Phone: [phone] - Tech Support and International: 330-572-3200

Fax: [phone] - E-mail: [e-mail]