Part Number
Description
Description
Qty
DXE-PT-4000-3P
HPTG-4000I TAIL KITS
(for systems using Phillystran
PHI-HPTG-4000I Guy Line)
502 Insulator
3
3/16” x 12 Ft - EHS Guy Wire
36 ft
Pre-form Big-grip Dead-End for 3/16” EHS Guy Wire
6
Thimble, EY414-12 (.375”)
3
Cable Ties, 11”
18
DXE-PT-6700-3P
HPTG-6700I TAIL KITS
(for systems using Phillystran
PHI-HPTG-6700I Guy Line)
502 Insulator
3
1/4” x 12 Ft - EHS Guy Wire
36 ft
Pre-form Big-grip Dead-End for 1/4” EHS Guy Wire
6
Thimble, EY414-14 (.437”)
3
Cable Ties, 11”
18
DXE-PT-11200-3P
HPTG-11200I TAIL KITS
(for systems using Phillystran
PHI-HPTG-11200I Guy Line)
504 Insulator
3
5/16” x 12 Ft - EHS Guy Wire
36 ft
Pre-form Big-grip Dead-End for 5/16” EHS Guy Wire
6
Thimble, EY414-14 (.437”)
3
Cable Ties, 11”
18
Selection Chart for the DX Engineering Tail Kits
Note: User MUST be familiar with, understand, and follow all recommended or mandatory safety and installation instructions that are available or supplied by the original
manufacturers of the materials/parts listed above. DX Engineering is not responsible for any damages or injuries as a result of using the kits listed above.
DXE-Tail Kits - Rev 1
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX
Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is proved to be other than as warranted; no allowance
shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any other work, unless such charges are authorized in advance by DX
Engineering. If DX Engineering’s products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions
for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in
writing. The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by
reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged exposure to corrosives or power surges,
or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or acquired from others at Buyer’s
specifications. In addition, DX Engineering’s warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer’s
warranty to DX Engineering. The obligations under the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in
lieu of all other remedies including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY WHATSOEVER,
WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME
FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2016
DX Engineering®, DXE®, DX Engineering, Inc. ®, Hot Rodz®, Maxi-Core®, DX Engineering THUNDERBOLT®, DX Engineering Yagi Mechanical®, EZ-BUILD®, TELREX®, Gorilla
Grip® Stainless Steel Boom Clamps, Butternut®, SkyHawk™, SkyLark™, SecureMount™, OMNI-TILT™ are trademarks of PDS Electronics, Inc. No license to use or reproduce
any of these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.
©DX Engineering 2016
1200 Southeast Ave. - Tallmadge, OH 44278
Phone: 800-777-0703 - Tech Support and International: 330-572-3200
email: DXEngineering@DXEngineering.com
Loading...