DX Engineering DXE-GLG4-3P Instructions manual

Guy Line Guards

DXE-GLG4-3P

The DX Engineering Guy Line Guards are used in situations when you want to protect coaxial
cable, such as rotator loops, from rubbing directly on metal guy lines or dead ends. The Guy Line
Guards can be mounted near the top of the guy lines and, since they are yellow in color, also at the
bottom of the guy lines to warn people that the guy line is present. The Guy Line Guards are a high
visibility yellow Poly material, split lengthwise for easy installation on existing guy lines. They are
approximately 46 inches (1.17 m) in length, packaged in a set of three and include a Zip-Tie to
secure them in place through the pre-drilled hole.

Photos from Contest Station K3LR

The Zip-Tie uses the drilled hole opposite the split side and is
wrapped around the existing guy line to hold the Guy Line Guard in place

1200 Southeast Ave. ∙ Tallmadge, OH 44278 USA

Phone: [phone] ∙Tech Support and International: [phone]

DXE-GLG4-3P-INS - Rev 0 Fax: [phone] ∙ E-mail: [e-mail]

©DX Engineering 2022