Ideal*
Tube Size OD (Inches)
Size Range*
OD
(Inches)
Band
Width
Nut
Driver
Size
DX Engineering
Part Number
Sold in Packages of 2
with # 10 Stainless
Steel Hardware
0.500
1/2
0.32 to 0.58
0.313
1/4”
DXE-ECLS-050
Band Clamp with Stud
0.625
5/8
0.42 to 0.68
0.313
1/4”
DXE-ECLS-062
Band Clamp with Stud
0.750
3/4
0.57 to 0.83
0.313
1/4”
DXE-ECLS-075
Band Clamp with Stud
0.875
7/8
0.64 to 0.87
0.500
5/16”
DXE-ECLS-087
Band Clamp with Stud
1.000
1
0.70 to 1.00
0.500
5/16”
DXE-ECLS-100
Band Clamp with Stud
1.125-1.250
1-1/8 - 1-1/4
0.83 to 1.25
0.500
5/16”
DXE-ECLS-125
Band Clamp with Stud
1.500
1-1/2
1.01 to 1.50
0.500
5/16”
DXE-ECLS-150
Band Clamp with Stud
1.750
1-3/4
1.15 to 1.75
0.500
5/16”
DXE-ECLS-175
Band Clamp with Stud
2.000
2
1.31 to 2.00
0.500
5/16”
DXE-ECLS-200
Band Clamp with Stud
2.250
2-1/4
1.31 to 2.25
0.500
5/16”
DXE-ECLS-225
Band Clamp with Stud
2.500
2-1/2
1.56 to 2.50
0.500
5/16”
DXE-ECLS-250
Band Clamp with Stud
2.750
2-3/4
1.81 to 2.75
0.500
5/16”
DXE-ECLS-275
Band Clamp with Stud
3.000
3
2.06 to 3.00
0.500
5/16”
DXE-ECLS-300
Band Clamp with Stud
3.250
3-1/4
2.31 to 3.25
0.500
5/16”
DXE-ECLS-325
Band Clamp with Stud
Band Clamps with Stud
These marine grade stainless steel band clamps are great for mounting items or making connections to a tube or
pipe with an outside diameter ranging from 0.500" to 3.250".
Each stainless steel band clamp has a 3/4 inch long, 10-24 stud welded to it, which allows attachments without
drilling holes that could weaken element or tower tubing. Use a straight slot screwdriver or nut driver to tighten.
Stainless steel attachment hardware consisting of flat washers, split-ring lock washers, external star washers and
10-24 hex nuts are included. Sold in a package of two.
When installing stainless steel hardware, it is suggested that UMI-81343, UMI-81464, DXE-NSBT8, DXE-
NMBT8 - Never-Seez® or Anti-Seize be used to prevent thread galling
* Although the “Size Range” is listed, DX Engineering strongly suggests you choose your studded band clamp based on the “Ideal Tube Size”.
The “Ideal Tube Size” restricts the amount of clamp being outside the worm drive to help prevent the user from being accidently cut.
PO Box 1491 - Akron, OH 44309-1491 USA
©DX Engineering 2013
Phone: 800-777-0703 Tech Support and International: 330-572-3200
e-mail: DXEngineering@DXEngineering.com
DXE-ECLS-INS Rev. 3b
Loading...