
Crimp Style Coax Connector
Coaxial Cable
Preparation
Tool for Crimp
Connectors
DXE-UT-240C-P1
Spruce Green
DXE-UT-240C-N1
Fluorescent Green
RG-8 with 12-13 AWG
center conductor
RG-8U with 10-11 AWG
center conductor
Combination Box
DXE-COAXBOX-C1
for use with the DXE-UT-KIT-CC1 and DXE-UT-KIT-CRMP2 Kits
( * dimensions are in inches)

Items included in the DXE-COAXBOX-C1:
DXE-PL259CS8U-6/12/24 DX Engineering Next Generation Crimp/Solder UHF Male
Silver plated PL-259 body, solder center conductor, 50 ohm, PTFE dielectric, crimp shield. For DXE-400 MAX,
DXE-8U, DXE-RG-11/U, DXE-213U, RG-8/U, LMR-400 type, most RG-213/U and equivalent coax cables with
center conductors up to 10 AWG. Sold in packages of 6, 12 or 24.
DXE-PL259CS8X-6/12/24 DX Engineering Next Generation Crimp/Solder UHF Male
Silver plated PL-259 body, solder center conductor, 50 ohm, PTFE dielectric, crimp shield. For DXE-8X, RG-8X,
LMR-240 type and equivalent coax cables with center conductors up to 10 AWG. Sold in packages of 6, 12 or 24.
AMP-172102H243 Amphenol Connex N-Type Male Crimp Connector
White bronze finished brass with gold plated contact. PTFE dielectric. 50 ohm. For DXE-400MAX, DXE-8U,
RG-8 (with 10-11 AWG center conductors), LMR-400 and equivalents.
AML-112533 Amphenol BNC Male Crimp Connector 112533.
Nickel finished brass with gold plated contact. Delrin dielectric. 50 ohm. For RG-8X, LMR-240, and
equivalents.
Suggested items to included in the DXE-COAXBOX-C1:
AMP-182130-10 Amphenol Connex UHF Male Crimp Connector 182130-10
Silver plated brass body, shell and center pin. Nickel plated copper crimp ferrule. 50 ohm. PTFE dielectric. Fits
DXE-8U, DXE-400MAX, LMR-400 and equivalent cables and RG-8U with 10-11 AWG center conductors.
AMP-172135 Amphenol Connex N-Type Male Crimp Connector 172135
Coaxial Cable Connector, Solderless crimp, PTFE dielectric. N Type Male for RG-8X, LMR-240, 50 ohm.
DXE-HAS12-20 Heat Shrink Tubing. Adhesive Heat Shrink, 0.50 in. O.D., 1.50 in. Length, 3:1 Ratio, for
RG-8U/400MAX/213U/11U, Pack of 20, Each
DXE-HS38-20 Heat Shrink Tubing. Adhesive Heat Shrink, 0.375 in. O.D., 1.50 in. Length, 3:1 Ratio, for
RG-8X/58AU/59AU/6U/6F, Pack of 20, Each
Suggested Tool Kits:
DXE-UT-KIT-CC1 Complete Kit includes:
DXE-UT-405C-P1 - crimp prep tool
DXE-UT-240C-P1 - crimp prep tool
DXE-UT-405C-N1 - crimp prep tool
DXE-UT-240C-N1 - crimp prep tool
DXE-UT-RB-CC1 10 pack of Spare Cutting Blades
DXE-CGH-8U Red Coaxial Cable Gripper for RG-213 sized coaxial cable
DXE-CGH-8X Green Coaxial Cable Gripper Tool for 8X sized coaxial cable
CNL-911 Coaxial Cable Shears
DXE-170M Precision Braid Trimmer
DXE-UT-CC1-CASE Custom Hard Plastic Carry Case with Custom Cut Foam Insert
DXE-UT-KIT-CRMP2 Complete Kit includes:
DXE-UT-CRMP2 Ultra-Grip-2 Crimp Connector Hand Tool
DXE-UT-DIE-8U Crimp Die for RG-8U/213/LMR-400 size cable
DXE-UT-DIE-8X Crimp Die for RG-8X/LMR-240 size cable
DXE-UT-DIE-PP Crimp Die for Powerpole® 15, 30, 45A contact
DXE-UT-DIE-INS for insulated crimp style terminals 22-18/15-14/12-10 AWG
DXE-UT-DIE-UNIS for uninsulated crimp style terminals 20-28/26-24/12-10 AWG
CNL-911 Coaxial Cable Shears
DXE-170M Precision Braid Trimmer
2.5 mm Allen Wrench
DXE-CRIMP-CASE Custom Hard Plastic Carry Case with Custom Cut Foam Insert
1200 Southeast Ave. - Tallmadge, OH 44278 USA
Phone: (800) 777-0703 - Tech Support and International - (330) 572-3200
Fax: (330) 572-3279 - E-mail: DXEngineering@DXEngineering.com
© DX Engineering 2017
DXE-COAXBOX-C1-INS Rev 0