14 August 2014
DX Engineering 8U Low-Loss RG-8U 50 ohm Coaxial Cable
DXE-8U
DXE-8U - Bulk Cable - No Connectors - Sold by the foot
DXE-8U Low-Loss
Foam Dielectric Cable
DXE-8U-500
DXE-8U - Bulk Cable - No Connectors - 500 foot length
DXE-8UDX002
DXE-8U Cable - PL-259 each end, Tested, 2 foot length
DXE-8UDX003
DXE-8U Cable - PL-259 each end, Tested, 30 foot length
DXE-8UDX006
DXE-8U Cable - PL-259 each end, Tested, 6 foot length
DXE-8UDX009
DXE-8U Cable - PL-259 each end, Tested, 9 foot length
DXE-8UDX012
DXE-8U Cable - PL-259 each end, Tested, 12 foot length
DXE-8UDX018
DXE-8U Cable - PL-259 each end, Tested, 18 foot length
DXE-8UDX025
DXE-8U Cable - PL-259 each end, Tested, 25 foot length
DXE-8UDX050
DXE-8U Cable - PL-259 each end, Tested, 50 foot length
DXE-8UDX075
DXE-8U Cable - PL-259 each end, Tested, 75 foot length
DXE-8UDX100
DXE-8U Cable - PL-259 each end, Tested, 100 foot length
Gas-Injected Foam Won’t Absorb Water
DXE-8UDX125
DXE-8U Cable - PL-259 each end, Tested, 125 foot length
Low-loss, gas-injected foam polyethylene
dielectric
.405” high-flex PVC jacket
Low-loss foam dielectric
Braided copper shield
DXE-8UDX150
DXE-8U Cable - PL-259 each end, Tested, 150 foot length
DXE-8UDX175
DXE-8U Cable - PL-259 each end, Tested, 175 foot length
DXE-8UDX200
DXE-8U Cable - PL-259 each end, Tested, 200 foot length
DX Engineering RG-8/U bulk coaxial cable is a low-loss corrected 50 ohm coaxial cable with a black vinyl
jacket and foam polyethylene dielectric. Specially suited for high-power amateur stations, RG-8/U provides a
lower loss solution for long cable runs at any power level. High reliability and low loss are key points when
considering this cable. DX Engineering 8U DX Series Low-Loss Coaxial Cable Assemblies are terminated
with our custom-designed, silver-plated DX Engineering PL-259 (UHF male) connectors. These next
generation PL-259 connectors feature: Full diameter, full length soldered center pins that snugly fit even
worn SO-239s - Spacious center pin inside diameter that accepts large conductors and allows generous
solder flow -Deep, double knurled threaded shells for secure finger tightening - These new, ultra-high quality
PL-259s have all silver-plated shells and bodies with center pins securely mounted in PTFE dielectric for
exceptional RF characteristics and power handling.
Attenuation/
100 ft.
Power
Rating
Efficiency
%
0.3 dB @ 5 MHz
5.4 kW
93 %
0.5 dB @ 10 MHz
4.1 kW
90 %
0.9 dB @ 30 MHz
2.2 kW
81 %
1.2 dB @ 50 MHz
1.8 kW
77 %
2.2 dB @ 150 MHz
1.0 kW
60 %
Velocity Factor: 81% (0.81)
Minimum Bend
Radius:
6” Repeated Bends
2.5” Fixed Install
DX Engineering RG-213/U MIL-Spec 50 ohm Coaxial Cable 213U
DXE-213U
DXE-213 - Bulk Cable - No Connectors - Sold by the foot
DXE-213U MIL-Spec Cable
DXE-213U-500
DXE-213 - Bulk Cable - No Connectors - 500 foot length
DXE-213UDX003
DXE-213 Cable - PL-259 each end, Tested, 3 foot length
DXE-213UDX006
DXE-213 Cable - PL-259 each end, Tested, 6 foot length
DXE-213UDX012
DXE-213 Cable - PL-259 each end, Tested, 12 foot length
DXE-213UDX018
DXE-213 Cable - PL-259 each end, Tested, 18 foot length
DXE-213UDX025
DXE-213 Cable - PL-259 each end, Tested, 25 foot length
DXE-213UDX050
DXE-213 Cable - PL-259 each end, Tested, 50 foot length
DXE-213UDX075
DXE-213 Cable - PL-259 each end, Tested, 75 foot length
DXE-213UDX100
DXE-213 Cable - PL-259 each end, Tested, 100 foot length
Solid Dielectric Won’t Absorb Water
DXE-213UDX125
DXE-213 Cable - PL-259 each end, Tested, 125 foot length
Solid Polyethylene Dielectric
.405 Type II-A jacket is non-contaminating and UV-
resistant, suitable for outdoor use
Direct-bury
Braided copper shield
Direct-bury
DXE-213UDX150
DXE-213 Cable - PL-259 each end, Tested, 150 foot length
DXE-213UDX175
DXE-213 Cable - PL-259 each end, Tested, 175 foot length
DXE-213UDX200
DXE-213 Cable - PL-259 each end, Tested, 200 foot length
DX Engineering RG-213/U is a low-loss, 50 ohm, MIL-spec bulk coaxial cable with a noncontaminating Type II PVC jacket. Specially manufactured for DX Engineering, RG-213/U cable is
perfect for outdoor use due to its excellent UV resistance and durability in direct-bury applications.
Specially suited for high-power amateur stations, RG-213/U provides a lower loss solution for long
cable runs at any power level. Featuring a solid polyethylene dielectric, DX Engineering RG-213/U
uses standard PL-259 and N connectors normally designed for RG-8 sized cables. DX Engineering
RG-213/U DX Series Low-Loss Coaxial Cable Assemblies are terminated with our customdesigned, silver-plated DX Engineering PL-259 (UHF male) connectors. These next generation PL259 connectors feature: Full diameter, full length soldered center pins that snugly fit even worn
SO-239s - Spacious center pin inside diameter that accepts large conductors and allows generous
solder flow -Deep, double knurled threaded shells for secure finger tightening - These new, ultrahigh quality PL-259s have all silver-plated shells and bodies with center pins securely mounted in
PTFE dielectric for exceptional RF characteristics and power handling.
Attenuation
/100 ft.
Power
Rating
Efficiency
%
0.4 dB @ 5 MHz
4.9 kW
90 %
0.6 dB @ 10 MHz
3.4 kW
87 %
1.0 dB @ 30 MHz
2.0 kW
79 %
1.3 dB @ 50 MHz
1.5 kW
73 %
2.4 dB @ 150 MHz
0.9 kW
57 %
Velocity Factor: 66% (0.66)
Minimum Bend Radius: 5”
DX Engineering 400MAX Low-Loss 50 ohm Coaxial Cable
DXE-400MAX
DXE-400MAX - Bulk Cable - No Connectors - Sold by the foot
DXE-400MAX-500
DXE-400MAX - Bulk Cable - No Connectors - 500 foot length
DXE-400MAXDX003
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 3 foot length
DXE-400MAXDX006
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 6 foot length
DXE-400MAXDX009
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 9 foot length
DXE-400MAXDX012
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 12 foot length
DXE-400MAXDX018
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 18 foot length
DXE-400MAXDX025
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 25 foot length
DXE-400MAXDX050
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 50 foot length
DXE-400MAXDX075
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 75 foot length
DXE-400MAXDX100
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 100 foot length
DXE-400MAXDX125
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 125 foot length
DXE-400MAXDX150
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 150 foot length
DXE-400MAXDX175
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 175 foot length
DXE-400MAXDX200
DXE-400MAX Cable - PL-259 on each end, Hi Pot Tested, 200 foot length
DXE-400MAXDN003
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 3 foot length
DXE-400MAXDN006
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 6 foot length
DXE-400MAXDN009
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 9 foot length
DXE-400MAXDN012
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 12 foot length
DXE-400MAXDN018
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 18 foot length
DXE-400MAXDN025
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 25 foot length
DXE-400MAXDN050
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 50 foot length
DXE-400MAXDN075
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 75 foot length
DXE-400MAXDN100
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 100 foot length
DXE-400MAXDN125
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 125 foot length
DXE-400MAXDN150
DXE-400MAX Cable - Type N Connector on each end, Hi Pot Tested, 150 foot length
DX Engineering 400MAX is premium, low-loss, 50 ohm bulk cable with a special Type III-A, UV-resistant polyethylene jacket that is ideal for
outdoor applications, particularly direct-bury. With its larger 10 AWG stranded copper center conductor, 400MAX is specially suited for high-power
amateur stations, providing a lower loss solution for long cable runs at any power level. The high-quality construction continues with a gas-injected
foam polyethylene dielectric, followed by the highest level of shielding from bonded aluminum tape covered by a tinned copper shield braid. DX
Engineering 400MAX Low-Loss 50 ohm Bulk Coaxial Cable uses standard PL-259 or N connectors. DX Engineering 400MAX DX Series Low-Loss
Coaxial Cable Assemblies are terminated with our custom-designed, silver-plated DX Engineering PL-259 (UHF male) connectors. These next
generation PL-259 connectors feature: Full diameter, full length soldered center pins that snugly fit even worn SO-239s - Spacious center pin inside
diameter that accepts large conductors and allows generous solder flow -Deep, double knurled threaded shells for secure finger tightening - These
new, ultra-high quality PL-259s have all silver-plated shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF
characteristics and power handling. Assemblies using Type-N Connectors are also available. All assemblies are fully tested.
Gas-Injected Foam Won’t Absorb Water
Attenuation/100 ft.
Power Rating
Efficiency %
Low-loss, gas-injected foam polyethylene
dielectric bonded tape foil covered by a
braided copper shield
.405” low-density polyethylene jacket is UV
resistant, ideal for outdoor use
Direct bury
Available with PL-259 or Type N Connectors
0.3 dB @ 5 MHz
6.9 kW
93 %
0.5 dB @ 10 MHz
4.8 kW
90 %
0.8 dB @ 30 MHz
2.8 kW
83 %
1.1 dB @ 50 MHz
2.1 kW
79 %
1.8 dB @ 150 MHz
1.2 kW
65 %
3.3 dB @ 450 MHz
0.7 kW
47 %
Velocity Factor: 84% (0.84)
Minimum Bend Radius:
6” Repeated Bends
2.5” Fixed Install
Loading...