Dwyer Instruments VALVES & CONNECTORS ACCESSORIES Catalog

ACCESSORIES - VALVES & CONNECTORS

A-310A/A-310B ++ A-311 ++ A-312 ++

Miscellaneous Accessories

A-5000 A-355 A-365

A-315 A-316 A-318A-317

A-319 A-321 ++ A-322

454

DWYER INSTRUMENTS, INC.

MODEL CHART Instrument valves for permanent installation. They mount in part A-316, A-317,

type C manometer connections or Magnehelic

tubing or 1/8˝ pipe.

Model Description A-310A

A-310B A-311 A-312 A-5001-1

A-5002-2

A-5003-3

A-5003-5

A-5004-4

A-5004-6

A-5005-3

A-5006-4

A-355

A-365

MODEL CHART Gage Connectors for Manometers. Molded nylon construction, threaded .786

x 27 N.S., with O-ring seal. Model Description A-315

A-316 A-317

A-318 A-319

A-321

A-322

3-way vent valve, plastic, 1/8˝ NPT to 1/4˝ metal tubing. Positions are: (1) Line: Gage connected to pressure source. (2) Off: Both gage and connection to pressure source closed. (3) Vent: Gage vented to atmosphere and connection to pressure source closed. 80 psi rating. Replaces former model A310 (brass) Same as A-310A but with 10 psi rating Shut off valve, brass, 1/8˝ NPT to 1/8˝ NPT Shut off valve, brass, 1/8˝ NPT to 1/4˝ metal tubing PVC 1/8˝ hose barb inlet x 1/8˝ hose barb outlet x 1/8˝ hose barb outlet (125 psi maximum) PVC 1/4˝ hose barb inlet x 1/4˝ hose barb outlet x 1/4˝ hose barb outlet (125 psi maximum) PVC 1/8˝ female NPT inlet x 1/8˝ female NPT outlet x 1/8˝ female NPT outlet (125 psi maximum) PVC 1/8˝ male NPT inlet x 1/8˝ female NPT outlet x 1/8˝ female NPT outlet (125 psi maximum) PVC 1/4˝ female NPT inlet x 1/4˝ female NPT outlet x 1/4˝ female NPT outlet (125 psi maximum) PVC 1/4˝ male NPT inlet x 1/4˝ female NPT outlet x 1/4˝ female NPT outlet (125 psi maximum) PVC 1/8˝ female NPT inlet x 1/8˝ male NPT outlet x 1/8˝ male NPT outlet (125 psi maximum) PVC 1/4˝ female NPT inlet x 1/4˝ male NPT outlet x 1/4˝ male NPT outlet (125 psi maximum) Porting valve, acrylic plastic, 1/8˝ NPT inserts. Used for convenient indication of pressure at two points with a single gage Dual porting valve, acrylic plastic, 1/8˝ NPT ttings. For monitoring three pressures, two at a time, with one gage

Gage connector, shut off type, for 3/16˝ rubber tubing Gage connector, bushing, 1/8˝ pipe thread opening Gage connector, 1/8˝ pipe thread opening, less OD thd., for slip t in 3/4˝ dia. opening in 250 series A.F. gages Gage connector 1/4˝ pipe thread opening Flexible red P.V.C. connector, 3/16˝ ID rubber tubing to 1/4˝ ID plastic tube for 1221,1222 and 1227 manometers Brass safety relief valve protects Magnehelic against over pressure due to regulator failure etc. Opens at 10 psi. Mounts in tee tting in sensing line or in unused gage port with addition of A-349 reducer. 1/4˝ male NPT (Use two for D.P. application) Gage connector for 1/4˝ tubing. Slip ts in 3/4˝ opening in 250 series A.F. gages (compression nut and ferrule not included)

++USA: California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

gage and connect to metal

or Photohelic® gage