Dwyer Instruments SERIES TST Catalog Page

GASKET

SERIES TST

DIGITAL TEMPERATURE SWITCH

Heating and Cooling Control, 16 Amp Rating

TEMPERATURE

The Series TST Digital Temperature Switch is designed with many heating and cooling applications in mind. This low cost switch is simple to set up with one probe input and SPDT switch output. Programming performed using either the front keypad or through a TS2-K programming key.

FEATURES/BENEFITS

• Buzzer indicates probe/memory error or high/low temperature alarm conditions

• Capacitive buttons offer clean panel face design

APPLICATIONS

• Refrigeration

• Holding ovens

• Boilers

• Brewing systems

MODEL CHART Model Supply Power TST-011

TST-021 TST-031 TST-041

115 VAC 230 VAC 12 VAC/VDC 24 VAC/VDC

ACCESSORIES

See page reference u below.

3.110 [79.0]

AUX

SET

Panel cutout 2-51/64˝ x 1-9/64˝ (71 x 29 mm)

SPECIFICATIONS Probe Range: PTC: -58 to 302°F (-50 to 150°C); NTC: -58 to 230°F (-50 to 110°C).

Input: PTC (1000 Ω @ 25°C) or NTC (10 KΩ @ 25°C) thermistor. Output: SPDT relay rated 16 A @ 240 VAC resistive, 10 FLA, 60 LRA. Horsepower Rating (HP): 1 HP. Control Type: On/Off. Power Requirements: 115 VAC, 230 VAC, 24 VAC/VDC, or 12 VAC/VDC. Power Consumption: 4 VA @ 115/230 VAC; 1.5 VA @ 12/24 VAC/VDC. Accuracy: ±1% FS. Display: 3-digit, plus sign. Resolution: 0.1°. Memory Backup: Nonvolatile memory. Ambient Temperature: 32 to 131°F (0 to 55°C). Storage Temperature: -4 to 176°F (-20 to 80°C). Weight: 115 and 230 V models: 7.2 oz (204 g); 12 and 24 V models: 4.8 oz (136 g). Front Panel Rating: IP65. Agency Approvals: CE, cURus.

uDigital Temperature Switch Probes and Accessories: See page 129 (Series TS-Probes)

1.440 [36.5]

2.440 [62.0]

1.110 [28.3]