Series
CABLE CONNECTION
2XØ9/64 THRU
2-21/64
[59.31]
15/16
[23.74]
33/64
[13.21]
1/4
[6.35]
1-35/64
[39.37]
19/64
[7.62]
2-1/32
[51.69]
“A”
ACETAL
FITTINGS
TRIMPOT
ADJUSTMENT
OPENING
TFP-LP
Liquid Turbine Flow Meter
PPS Body, 0 to 5 VDC and Pulse Outputs
Series TFP-LP Liquid Turbine Flow Meters are suitable for a wide variety of
industrial, commercial, and laboratory flow applications. These meters utilize a turbine
wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output
signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer
for a remote flow monitoring display. A power adapter or mating cable assembly is required
for operation.
Model
TFP-LP03
TFP-LP04
TFP-LP05
TFP-LP06
TFP-LP07
TFP-LP08
TFP-LP09
ACCESSORIES
Model
A-454
A-455
A-456
Range
.21 to 1.6 GPH (.013 to .1 LPM)
.32 to 3.2 GPH (.02 to .2 LPM)
.79 to 7.9 GPH (.05 to .5 LPM)
1.6 to 16 GPH (0.1 to 1 LPM)
3.2 to 32 GPH (.2 to 2 LPM)
7.9 to 79 GPH (.5 to 5 LPM)
16 to 160 GPH (1 to 10 LPM)
Description
115 VAC Power Adapter and Signal Cable
230 VAC Power Adapter and Signal Cable
36˝ Mating Cable with Spliced Leads
Connection
1/8˝ OD
1/4˝ OD
1/4˝ OD
1/4˝ OD
1/4˝ OD
3/8˝ OD
3/8˝ OD
“A” (in)
3-9/16
3-41/64
3-41/64
3-41/64
3-41/64
3-27/32
3-27/32
SPECIFICATIONS
Service: Clean liquids compatible with wetted materials.
Wetted Materials: PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy: ±1% of full-scale.
Linearity: ±1% of full-scale.
Repeatability: ±0.2% of full-scale.
Temperature Limits: 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C);
Sensitivity: ±0.2% of full-scale per °C.
Pressure Limits: 100 psig (6.8 bar).
Process Connection: Compression fitting, see model table.
Power Requirements: 11.5 to 15 VDC.
Power Consumption: 35 mA @ 12 VDC.
Output Signal: 0 to 5 VDC: Minimum 2.5 kΩ load; Pulse: 7.5 VDC peak buffered
square wave.
Electrical Connections: Four-pin power and signal connector. A power adapter or
mating cable required for operation. See accessories table.
Enclosure Rating: IP10 (NEMA 1).
Weight: 0.19 lb (85 g).
Agency Approvals: CE.
FLOW